Top 24 for Best Fitting Adapter

 

Brennan PCNY2405-04-02 PBT Push-to-Connect Tube Fitting Adapter 14 Tube OD x 18 NPT Female

Brennan PCNY2405-04-02 PBT Push-to-Connect Tube Fitting, Adapter, 1/4″ Tube OD x 1/8″ NPT Female

Brennan PCNY2405-04-02 PBT Push-to-Connect Tube Fitting, Adapter, 1/4″ Tube OD x 1/8″ NPT Female - Operating temperature ranges from -4 to 175 degrees f. Made of polybutylene terephthalate (pbt) for resistance to solvents, shrinkage, heat, and impact. Working pressure of up to 290 psi. Wye fitting with three openings for connecting and branching three pipes. Push-to-connect fitting connects to pipes or tubing on one end and has an npt female connector on the other.

 

Banjo HB050-075 Polypropylene Hose Fitting Adapter 12 NPT Male x 34 Barbed

Banjo HB050-075 Polypropylene Hose Fitting, Adapter, 1/2″ NPT Male x 3/4″ Barbed

Banjo HB050-075 Polypropylene Hose Fitting, Adapter, 1/2″ NPT Male x 3/4″ Barbed - Connects a hose on one end and a female npt threaded connection on the other. Adapter for connecting pipes or hoses of different types. Maximum working pressure of 150 psi at 70 degrees f. Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact. Integral hex nut for using a wrench to tighten the fitting.

 

Spears 1436 Series PVC Tube Fitting Adapter Schedule 40 Gray 1 Barbed x NPT Male

Spears 1436 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 1″ Barbed x NPT Male

Spears 1436 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 1″ Barbed x NPT Male - Pvc for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons. Maximum working temperature of 140 degrees f. Barbed fitting creates a tight seal on flexible tubing when used with a hose clamp (sold separately). Meets astm d2609 standards for plastic insert fittings and nsf 61 certified for use with potable water. For use in connecting npt pipe to schedule 40 pe flexible tubing in a straight run.

 

Banjo HB100 Polypropylene Hose Fitting Adapter 1 NPT Male x 1 Barbed

Banjo HB100 Polypropylene Hose Fitting, Adapter, 1″ NPT Male x 1″ Barbed

Banjo HB100 Polypropylene Hose Fitting, Adapter, 1″ NPT Male x 1″ Barbed - Integral hex nut for using a wrench to tighten the fitting. Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact. Adapter for connecting pipes or hoses of different types. Maximum working pressure of 150 psi at 70 degrees f. Connects a hose on one end and a female npt threaded connection on the other.

 

Anderson Metals 57001 Brass Hose Fitting Adapter 38 Barb x 38 NPT Male Pipe

Anderson Metals 57001 Brass Hose Fitting, Adapter, 3/8″ Barb x 3/8″ NPT Male Pipe

Anderson Metals 57001 Brass Hose Fitting, Adapter, 3/8″ Barb x 3/8″ NPT Male Pipe - These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Adapter for connecting a hose to a male threaded connection of a different diameter. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Barbed fitting for a tight seal on hoses and npt threads for a tighter seal than straight threads. Hose barb on one end and male npt threads on the other.

 

Eaton Aeroquip 2216-6-8S Steel Pipe Fitting Adapter 38 NPT Female x 12 Male Straight Thread O-Ring

Eaton Aeroquip 2216-6-8S Steel Pipe Fitting, Adapter, 3/8″ NPT Female x 1/2″ Male Straight Thread O-Ring

Eaton Aeroquip 2216-6-8S Steel Pipe Fitting, Adapter, 3/8″ NPT Female x 1/2″ Male Straight Thread O-Ring - National pipe thread (npt) female adapter to connect a pipe to an npt male thread. Society of automotive engineers (sae)-compliant for sae standards j512, j513, j514, j1926 and j1453 for functional requirements. Standard duty for light to medium pressure applications. Steel for weldability and greater resistance to rust than iron. Npt female threads at both ends for connecting two pipes.

 

12 PVC Bulkhead Fitting Adapter For Rain Barrels Aquariums Water Tanks Ponds

1/2″ PVC Bulkhead Fitting Adapter For Rain Barrels, Aquariums, Water Tanks, Ponds

1/2″ PVC Bulkhead Fitting Adapter For Rain Barrels, Aquariums, Water Tanks, Ponds - 1/2″ pvc bulkhead fitting for rain barrels, water tanks, or aquariums. The best bulkhead fitting in its class with thick premium silicon seal gasket. Reduce total cost of ownership with these quality bulkheads. Commercial and industrial use available in sizes 1/2″, 3/4″, 1″, 125″, 150″, 2″, and 3″ bulkhead fittings. Durable and longer lasting pvc versus standard plastic bulkhead fittings.

 

Dixon BN32RU68 Brass Reusable Fitting Adapter 14 NPTF Male x 38 Hose ID 1116 Hose OD

Dixon BN32RU68 Brass Reusable Fitting, Adapter, 1/4″ NPTF Male x 3/8″ Hose ID, 11/16″ Hose OD

Dixon BN32RU68 Brass Reusable Fitting, Adapter, 1/4″ NPTF Male x 3/8″ Hose ID, 11/16″ Hose OD - Recommended for low pressure air hose applications. Adapter for connecting hose or fittings of different types. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability with viton seal for use with a variety of chemicals and fuels and resistance to ozone and weathering. Connects to hose on one end and a female nptf threaded connection on the other. Maximum working pressure of 250 psi at 70 degrees f.

 

Spears 436 Series PVC Pipe Fitting Adapter Schedule 40 White 34 NPT Male x Socket

Spears 436 Series PVC Pipe Fitting, Adapter, Schedule 40, White, 3/4″ NPT Male x Socket

Spears 436 Series PVC Pipe Fitting, Adapter, Schedule 40, White, 3/4″ NPT Male x Socket - In addition to offering high quality products, aqua plumb works tirelessly to bring you the absolute best and most competitive prices in the market. Sturdy and secure construction. Perfect for your household. With a legacy in the plumbing industry that dates back to 1927, aqua plumb has the knowledge and experience to make sure every product meets or exceeds industry standards. For almost 40 years, aqua plumb has been the value leader in the plumbing specialty and repair parts industry. High quality product.

 

Spears 836 Series PVC Pipe Fitting Adapter Schedule 80 34 Socket x NPT Male

Spears 836 Series PVC Pipe Fitting, Adapter, Schedule 80, 3/4″ Socket x NPT Male

Spears 836 Series PVC Pipe Fitting, Adapter, Schedule 80, 3/4″ Socket x NPT Male - Maximum operating temperature of 140 degrees f. Pvc for chemical and corrosion resistance, high strength, and less weight than fittings made from metal. Socket opening on one end and male npt threads on the other for connecting two pipes with different ends. Meets astm d1784 and d2467 standards for quality assurance, and certified by nsf international for potable water service. Adapter for connecting pipes or fittings of different types.

 

Banjo HB150-200 Polypropylene Hose Fitting Adapter 1-12 NPT Male x 2 Barbed

Banjo HB150-200 Polypropylene Hose Fitting, Adapter, 1-1/2″ NPT Male x 2″ Barbed

Banjo HB150-200 Polypropylene Hose Fitting, Adapter, 1-1/2″ NPT Male x 2″ Barbed - Connects a hose on one end and a female npt threaded connection on the other. Integral hex nut for using a wrench to tighten the fitting. Adapter for connecting pipes or hoses of different types. Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact. Maximum working pressure of 150 psi at 70 degrees f.

 

Banjo HB050 Polypropylene Hose Fitting Adapter 12 NPT Male x 12 Barbed

Banjo HB050 Polypropylene Hose Fitting, Adapter, 1/2″ NPT Male x 1/2″ Barbed

Banjo HB050 Polypropylene Hose Fitting, Adapter, 1/2″ NPT Male x 1/2″ Barbed - Maximum working pressure of 150 psi at 70 degrees f. Adapter for connecting pipes or hoses of different types. Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact. Connects a hose on one end and a female npt threaded connection on the other. Integral hex nut for using a wrench to tighten the fitting.

 

MettleAir 122-BA-1PK 14 NPT Male to 18 NPT Male Brass Pipe Hex ReducerReducing Nipple FittingAdapter

MettleAir 122-BA-1PK 1/4″ NPT Male to 1/8″ NPT Male Brass Pipe Hex Reducer/Reducing Nipple Fitting/Adapter

MettleAir 122-BA-1PK 1/4″ NPT Male to 1/8″ NPT Male Brass Pipe Hex Reducer/Reducing Nipple Fitting/Adapter - Quantity 1 (one) piece our quality barbed/threaded connectors/couplers are manufactured to the highest standards. Important note “pipe thread size” does not directly correspond to actual dimensions of the thread. They are perfect for connecting lines for air / pneumatic systems.

 

Dixon BMA974 Brass Fitting Adapter 34 GHT Female x 12 NPTF Male

Dixon BMA974 Brass Fitting, Adapter, 3/4″ GHT Female x 1/2″ NPTF Male

Dixon BMA974 Brass Fitting, Adapter, 3/4″ GHT Female x 1/2″ NPTF Male - This dixon bma series brass adapter has a female ght threaded end, male nptf threaded end, and connects hoses or fittings of different types. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. This fitting has female garden hose threads (ght) to connect to a male ght connection and male national pipe taper fine (nptf) threads to connect to a female nptf connection for a tighter seal than straight threads. This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. The company, founded in 1916, is headquartered in chestertown, md. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. Dixon valve & coupling company manufactures pipe and hose fittings and accessories.

 

Banjo HB025-038SS Stainless Steel 316 Hose Fitting Adapter 14 NPT Male x 38 Barbed

Banjo HB025-038SS Stainless Steel 316 Hose Fitting, Adapter, 1/4″ NPT Male x 3/8″ Barbed

Banjo HB025-038SS Stainless Steel 316 Hose Fitting, Adapter, 1/4″ NPT Male x 3/8″ Barbed - This adaptor is suitable for fluid handling applications, including fertilizers, herbicides, acids, some solvents, liquid waste, saltwater, and cooling water. Banjo manufactures valves, couplings, pumps, pipe and hose fittings, and other fluid handling products for industrial applications. This banjo hb025-038ss stainless steel hose adaptor has a 1/4″ male end for connecting to threaded pipe conforming to national pipe thread (npt) standards and a barbed fitting for connecting to hose with a 3/8″ inside diameter. It has a temperature range from -30 to +150 degrees f and a maximum working pressure of 150 pounds per square inch (psi). This fitting is made of american iron and steel institute (aisi) 316 stainless steel for strength and resistance to corrosion. The barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately), and a male npt fitting on the other end connects to threaded pipe to form a tight, fixed connection. The company, founded in 1995, is headquartered in crawfordsville, in.

 

MettleAir 122-DB-1PK 12 NPT Male to 14 NPT Male Brass Pipe Hex ReducerReducing Nipple FittingAdapter

MettleAir 122-DB-1PK 1/2″ NPT Male to 1/4″ NPT Male Brass Pipe Hex Reducer/Reducing Nipple Fitting/Adapter

MettleAir 122-DB-1PK 1/2″ NPT Male to 1/4″ NPT Male Brass Pipe Hex Reducer/Reducing Nipple Fitting/Adapter - Important note “pipe thread size” does not directly correspond to actual dimensions of the thread. Quantity 1 (one) piece our quality barbed/threaded connectors/couplers are manufactured to the highest standards. They are perfect for connecting lines for air / pneumatic systems.

 

NIBCO 4803-2 Series PVC DWV Pipe Fitting Adapter 3 Spigot x NPT Female

NIBCO 4803-2 Series PVC DWV Pipe Fitting, Adapter, 3″ Spigot x NPT Female

NIBCO 4803-2 Series PVC DWV Pipe Fitting, Adapter, 3″ Spigot x NPT Female - Pvc-dwv for corrosion resistance, high strength, and less weight than fittings made from metal. Spigot on one end and female national pipe taper (npt) threads on the other for connecting two pipes with different ends. Meets specifications astm d2665 and d3311 for quality assurance. Adapter for connecting pipes or fittings of different types. Smooth interior finish for reduced friction and material buildup.

 

Parker CPI 4-4 FBZ-B Brass Compression Tube Fitting Adapter 14 Tube OD x 14 NPT Male

Parker CPI 4-4 FBZ-B Brass Compression Tube Fitting, Adapter, 1/4″ Tube OD x 1/4″ NPT Male

Parker CPI 4-4 FBZ-B Brass Compression Tube Fitting, Adapter, 1/4″ Tube OD x 1/4″ NPT Male - For use with copper pipe and tubing. Adapter for connecting pipes or fittings of different types. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. Fitting connects to tubing on one end and has an npt male connector on the other.

 

Anderson Metals 57001 Brass Hose Fitting Adapter 14 Barb x 14 NPT Male Pipe

Anderson Metals 57001 Brass Hose Fitting, Adapter, 1/4″ Barb x 1/4″ NPT Male Pipe

Anderson Metals 57001 Brass Hose Fitting, Adapter, 1/4″ Barb x 1/4″ NPT Male Pipe - Excellent vibration resistance. One piece construction. Barbed edges provide positive connection. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule.

 

Spears 835-CSR Series CPVC Pipe Fitting Adapter Schedule 80 1 Socket x Stainless Steel Reinforced NPT Female

Spears 835-CSR Series CPVC Pipe Fitting, Adapter, Schedule 80, 1″ Socket x Stainless Steel Reinforced NPT Female

Spears 835-CSR Series CPVC Pipe Fitting, Adapter, Schedule 80, 1″ Socket x Stainless Steel Reinforced NPT Female - Maximum operating temperature of 200 degrees f. Socket opening on one end and reinforced female npt threads on the other for connecting two pipes with different ends. Adapter for connecting pipes or fittings of different types. Meets astm d1784 and f439 standards for quality assurance, certified by nsf international for potable water service, and abs type approved for marine and offshore applications. Cpvc for chemical and corrosion resistance, high strength, and better resistance to high temperatures and pressures than pvc.

 

Eaton Weatherhead 1068X4X1 Brass CA360 Mini-Barb Brass Fitting Adapter 14 Tube OD x 116 NPT Male Pack of 5

Eaton Weatherhead 1068X4X1 Brass CA360 Mini-Barb Brass Fitting, Adapter, 1/4″ Tube OD x 1/16″ NPT Male (Pack of 5)

Eaton Weatherhead 1068X4X1 Brass CA360 Mini-Barb Brass Fitting, Adapter, 1/4″ Tube OD x 1/16″ NPT Male (Pack of 5) - They are made of brass, stainless steel, polybutylene terephthalate (pbt), and other materials that resist corrosion and wear. Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. The company, founded in 1911, is headquartered in dublin, ireland. The fitting is made of ca360 brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others. Push-to-connect connections do not require tools or sealants. The barbed stem creates a tight seal on flexible tubing without the use of hose clamps or ferrules. Eaton manufactures electrical, hydraulic, and mechanical power equipment. This eaton weatherhead 1068x4x1 brass mini-barb fitting connects a 1/16″ national pipe taper (npt) male connector to 1/4″ outside diameter (od) flexible tubing. This mini-barb fitting is suitable for use in low-pressure air or lubrication lines, such as in temperature control circuits or vacuum lines. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch).

 

Banjo HB075-050 Polypropylene Hose Fitting Adapter 34 NPT Male x 12 Barbed

Banjo HB075-050 Polypropylene Hose Fitting, Adapter, 3/4″ NPT Male x 1/2″ Barbed

Banjo HB075-050 Polypropylene Hose Fitting, Adapter, 3/4″ NPT Male x 1/2″ Barbed - Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact. Maximum working pressure of 150 psi at 70 degrees f. Integral hex nut for using a wrench to tighten the fitting. Connects a hose on one end and a female npt threaded connection on the other. Adapter for connecting pipes or hoses of different types.

 

Eaton Weatherhead 5217X4 Stainless Steel SAE 37 Degree JIC Flare-Twin Fitting Adapter 18 NPT Male x 14 JIC Male

Eaton Weatherhead 5217X4 Stainless Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/8″ NPT Male x 1/4″ JIC Male

Eaton Weatherhead 5217X4 Stainless Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/8″ NPT Male x 1/4″ JIC Male - The company, founded in 1911, is headquartered in dublin, ireland. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others. Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (pbt), and other materials that resist corrosion and wear. Flared-tube-fittingseaton manufactures electrical, hydraulic, and mechanical power equipment. Push-to-connect connections do not require tools or sealants. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch).

 

Banjo HB050-038 Polypropylene Hose Fitting Adapter 12 NPT Male x 38 Barbed

Banjo HB050-038 Polypropylene Hose Fitting, Adapter, 1/2″ NPT Male x 3/8″ Barbed

Banjo HB050-038 Polypropylene Hose Fitting, Adapter, 1/2″ NPT Male x 3/8″ Barbed - Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact. Integral hex nut for using a wrench to tighten the fitting. Adapter for connecting pipes or hoses of different types. Maximum working pressure of 150 psi at 70 degrees f. Connects a hose on one end and a female npt threaded connection on the other.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.