Top 23 Dark Bronze Anodizeds

 

Pemko 216DV36 Dark Bronze Anodized Finish Wrap Round Combination Door Shoe with Vinyl Weatherseal for 36 Doors #ad

Pemko 216DV36 Dark Bronze Anodized Finish Wrap Round Combination Door Shoe with Vinyl Weatherseal for 36″ Doors

Pemko 216DV36 Dark Bronze Anodized Finish Wrap Round Combination Door Shoe with Vinyl Weatherseal for 36″ Doors #ad - Pemko wrap round combination door shoes are used to seal the area under a door with minimal affect on the appearance of the face of the door. Channels are punched with elongated slots for easy adjustment. Color dark bronze anodized length 36-1/2 in minimum order 1 each. In addition to sealing the gap under the door, door shoes are often used to provide protection for the bottom of the door. The wrap round combination door shoes consist of an aluminum channel witha flexible insert. Door bottom door sweeps are provided with stainless steel fasteners.

 

Pemko 74518D 365 in Dark Bronze Anodized Aluminum All-Aluminum Adjustable Sill Residential Threshold-1 Not Required #ad

Pemko 74518D 36.5 in. Dark Bronze Anodized Aluminum All-Aluminum Adjustable Sill Residential Threshold-1. Not Required

Pemko 74518D 36.5 in. Dark Bronze Anodized Aluminum All-Aluminum Adjustable Sill Residential Threshold-1. Not Required #ad - Pushbar clad or anodized, not plated, in a variety of finishes. Five year limited warranty. Easy to install clean, unobtrusive design. Pemko 74518d 365 in dark bronze anodized aluminum all-aluminum adjustable sill residential threshold-1 not required. Strong, durable construction for a high level of security.

 

Pemko Brush GasketingDoor Bottom 45-degree Dark Bronze Anodized Aluminum with 0625 Black Nylon Brush insert 031 width 025 Height 48 Length #ad

Pemko Brush Gasketing/Door Bottom, 45-degree, Dark Bronze Anodized Aluminum with 0.625″ Black Nylon Brush insert, 0.31″ width, 0.25″ Height, 48″ Length

Pemko Brush Gasketing/Door Bottom, 45-degree, Dark Bronze Anodized Aluminum with 0.625″ Black Nylon Brush insert, 0.31″ width, 0.25″ Height, 48″ Length #ad - Brush remains flexible down to -40°f and has a melting point above 400°f. All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow prevent heat loss control the penetration of smoke and fumes. Uv stabilized, dependable, long-lasting, cost-effective. All clear anodized brush products are supplied with gray brush. The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force.

 

Online Metal Supply 5005 Dark Bronze Anodized Aluminum Sheet 063 x 12 x 12 #ad

Online Metal Supply 5005 Dark Bronze Anodized Aluminum Sheet .063″ x 12″ x 12″

Online Metal Supply 5005 Dark Bronze Anodized Aluminum Sheet .063″ x 12″ x 12″ #ad - Anodizing adds a protective layer to the material to which gives it a smooth, slick surface that is resistance to weather and elements. 06) notes sheets are anodized on one side only, anodized side is protected with peel off coating, backside may have scratches from shearing operations. Material aluminumalloy 5005temper h34 shape sheet thickness 0. 063 inchwidth 12 incheslength 12 inchesfinish anodized product weight 0. 86 lbs thickness tolerance (+/-. 06) length tolerance (+/-0. Dark bronze anodized aluminum sheet has a smooth colored anodized finish on the front side, the backside of the sheet may or may not have anodized color. 001) width tolerance (+/-0.

 

Dor-O-Matic EL1692NL-OPHB-OP 36IN DC13 Concealed Vertical Rod El Nl Exit Device 36 Dc13 Dark Bronze Anodized #ad

Dor-O-Matic EL1692NL-OP/HB-OP 36IN DC13 Concealed Vertical Rod El Nl Exit Device 36 Dc13, Dark Bronze Anodized

Dor-O-Matic EL1692NL-OP/HB-OP 36IN DC13 Concealed Vertical Rod El Nl Exit Device 36 Dc13, Dark Bronze Anodized #ad - Hand field reversible, non-handed. All machine screw mounting device mounting fasteners are concealed, latch fasteners are exposed to egress side. Hex key dogging standard, except el where must use hold back feature. Black powder-coated metal end caps. El, electric latch retraction, ed, electric dogging (both el and ed require ps873-2 minimum power supply) rx, request to exit switch, monitors pushpad sptd switch.

 

Rockwood BF158314 Aluminum 90-Degree Offset Door Pull 1 Diameter x 12 Center-to-Center Through Bolt Mounting for 1-34 Door Extra Dark Bronze Anodized Finish #ad

Rockwood BF158.314 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 12″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Extra Dark Bronze Anodized Finish

Rockwood BF158.314 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 12″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Extra Dark Bronze Anodized Finish #ad - Pull has a 12″ center-to-center length, 13″ overall length, 1″ diameter, 3-1/2″ projection, and 2-1/2″ clearance, and is offset 4″. Meets ansi a1566 j402 specifications and is ada compliant. Aluminum 90-degree offset door pull with an extra dark bronze anodized finish and a through-bolt mounting style for a standard 1-3/4″ thick door. Includes mounting hardware.

 

Rockwood 112313 Aluminum Straight Solid Door Pull for 1-34 Door 1 Diameter x 12 Center-to-Center Type 1 Through-Bolt Mount Dark Bronze Anodized Finish #ad

Rockwood 112.313 Aluminum Straight Solid Door Pull for 1-3/4″ Door, 1″ Diameter x 12″ Center-to-Center, Type 1 Through-Bolt Mount, Dark Bronze Anodized Finish

Rockwood 112.313 Aluminum Straight Solid Door Pull for 1-3/4″ Door, 1″ Diameter x 12″ Center-to-Center, Type 1 Through-Bolt Mount, Dark Bronze Anodized Finish #ad - Pull has a 12″ center-to-center length, 13″ overall length, 1″ diameter, 3″ projection, and 2″ clearance. Meets ansi a1566 j401 specifications. Aluminum straight solid door pull with a dark bronze anodized finish and a type 1 through bolt mounting style for use on a standard 1-3/4″ thick door. Includes mounting hardware.

 

Rockwood 107314 Aluminum Straight Door Pull for 1-34 Door 34 Diameter x 8 Center-to-Center Type 1 Through-Bolt Mount Extra Dark Bronze Anodized Finish #ad

Rockwood 107.314 Aluminum Straight Door Pull for 1-3/4″ Door, 3/4″ Diameter x 8″ Center-to-Center, Type 1 Through-Bolt Mount, Extra Dark Bronze Anodized Finish

Rockwood 107.314 Aluminum Straight Door Pull for 1-3/4″ Door, 3/4″ Diameter x 8″ Center-to-Center, Type 1 Through-Bolt Mount, Extra Dark Bronze Anodized Finish #ad - Includes mounting hardware. Pull has an 8″ center-to-center length, 8-3/4″ overall length, 3/4″ diameter, 2-5/8″ projection, and 1-7/8″ clearance. Aluminum straight door pull with an extra dark bronze anodized finish and a type 1 through bolt mounting style for use on a standard 1-3/4″ thick door. Meets ansi a1566 j401 specifications.

 

Pemko Magnetic Perimeter Gasketing Dark Bronze Anodized Aluminum with Magnetic Insert 48 L x 04275 W x 1 H #ad

Pemko Magnetic Perimeter Gasketing, Dark Bronze Anodized Aluminum with Magnetic Insert, 48″ L x 0.4275″ W x 1″ H

Pemko Magnetic Perimeter Gasketing, Dark Bronze Anodized Aluminum with Magnetic Insert, 48″ L x 0.4275″ W x 1″ H #ad - Pemko perimeter gasketing products are designed to seal the gap around the top and the 2 sides of a door assembly. The top of the door (head) is the first number used in ordering a perimeter set of gasketing. The side jambs are provided as two pieces. Magnetic gasketing provides an effective perimeter seal around a steel faced door. The sides (side jambs) are the second number used in ordering. Numerous channels are available with a wide variety of inserts.

 

Rockwood BF157A314 Aluminum 90-Degree Offset Door Pull 1 Diameter x 9 Center-to-Center Through Bolt Mounting for 1-34 Door Extra Dark Bronze Anodized Finish #ad

Rockwood BF157A.314 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 9″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Extra Dark Bronze Anodized Finish

Rockwood BF157A.314 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 9″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Extra Dark Bronze Anodized Finish #ad - Meets ansi a1566 j402 specifications and is ada compliant. Includes mounting hardware. Pull has a 9″ center-to-center length, 10″ overall length, 1″ diameter, 3-1/2″ projection, and 2-1/2″ clearance, and is offset 4″. Aluminum 90-degree offset door pull with an extra dark bronze anodized finish and a through-bolt mounting style for a standard 1-3/4″ thick door.

 

Pemko 221DV36 Dark Bronze Anodized Finish Wrap Around Door Bottom Door Shoes with Vinyl Weatherseal for 36 Door #ad

Pemko 221DV36 Dark Bronze Anodized Finish Wrap Around Door Bottom Door Shoes with Vinyl Weatherseal for 36″ Door

Pemko 221DV36 Dark Bronze Anodized Finish Wrap Around Door Bottom Door Shoes with Vinyl Weatherseal for 36″ Door #ad - In addition to sealing the gap under the door, door shoes are often used to provide protection for the bottom of the door. The door bottom door shoes consist of an aluminum channel with a flexible vinyl weatherseal. Pemko door bottom door shoes are used to seal the area under a door with minimal affect on the appearance of the face of the door.

 

Pemko Magnetic Perimeter Gasketing Dark Bronze Anodized Aluminum with Magnetic Insert 96 L x 04275 W x 1 H #ad

Pemko Magnetic Perimeter Gasketing, Dark Bronze Anodized Aluminum with Magnetic Insert, 96″ L x 0.4275″ W x 1″ H

Pemko Magnetic Perimeter Gasketing, Dark Bronze Anodized Aluminum with Magnetic Insert, 96″ L x 0.4275″ W x 1″ H #ad - The top of the door (head) is the first number used in ordering a perimeter set of gasketing. Pemko perimeter gasketing products are designed to seal the gap around the top and the 2 sides of a door assembly. Magnetic gasketing provides an effective perimeter seal around a steel faced door. The side jambs are provided as two pieces. The sides (side jambs) are the second number used in ordering. Numerous channels are available with a wide variety of inserts.

 

Pemko Fluted Saddle Threshold Dark Bronze Anodized Aluminum 36L x 10W x 025H #ad

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 36″L x 10″W x 0.25″H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 36″L x 10″W x 0.25″H #ad - Cylinder not included. 1-1/8″ backset. Easy to change hand. To use a saddle threshold in an offset condition, use an elevator. Heavy duty.

 

Adams Rite 7101-440-313 Electric Strike for Aluminum Jambs with Radius Faceplate 16 Volt AC Fail Secure 313 Dark Bronze Anodized Finish #ad

Adams Rite 7101-440-313 Electric Strike for Aluminum Jambs with Radius Faceplate. 16 Volt AC. Fail Secure. 313 Dark Bronze Anodized Finish.

Adams Rite 7101-440-313 Electric Strike for Aluminum Jambs with Radius Faceplate. 16 Volt AC. Fail Secure. 313 Dark Bronze Anodized Finish. #ad - Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-5/8”. Faceplate measures 1-1/4” x 4-7/8”. Function remote electrical control of any door equipped with an adams rite 4500, 4700, or 4900 series (or similar) deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2” to 5/8” latchbolt projection. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number. Voltage available in 12 or 24 volt ac and dc. Not available on 7101. Dc continuous units are silent, ac intermittent units “buzz” on operation. Available in a wide range of architectural finishes. Strike accepts bolt of any adams rite 4500, 4700 (discontinued), or 4900 deadlatch or cylindrical latches. Description 7100, 7101 electric strikes with 4-7/8” faceplates are designed for adams rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. 7100 has flat faceplate 7101 is radiused to match nose on inactive leaf in a pair of narrow stile glass doors. Strike opening 5/8” x 1-7/16” x 1/2” deep. Specifications fail-safe/fail-secure field convertible from one mode to the other. Case approximately 1” x 3-3/8” x 1-5/8” deep. Strike lip basic 7100 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. For use in aluminum jambs and stiles. Fits existing prep for discontinued adams rite 7000, 7500, 7800 electric strikes. Bolt retainer jaw is stainless steel. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. However, ac intermittent solenoid must not be used continuously in either.

 

Adams Rite 4900-45-102-313 Heavy Duty Deadlatch with 1-12 Backset and Flat Faceplate LH or RHR with a 2-58 Strike 313 Dark Bronze Anodized Finish #ad

Adams Rite 4900-45-102-313 Heavy Duty Deadlatch with 1-1/2″ Backset and Flat Faceplate. LH or RHR with a 2-5/8″ Strike. 313 Dark Bronze Anodized Finish.

Adams Rite 4900-45-102-313 Heavy Duty Deadlatch with 1-1/2″ Backset and Flat Faceplate. LH or RHR with a 2-5/8″ Strike. 313 Dark Bronze Anodized Finish. #ad - Uses any standard 1-5/32” mortise cylinder with ms® dimensioned cam. To hold bolt retracted, push it in and secure by reverse turn of key. Latchbolt 5/8” x 1” x 5/8” throw. Operation turn key or operate handle or paddle to retract spring-loaded latch bolt. 1-3/4” minimum door thickness required. By any standard mortise cylinder with ms® cam, dimensioned as shown. Description 4900 heavy duty deadlatch provides flexible traffic control and easy installation. Handing is easily reversible using only a screwdriver. Function flexibility of traffic control and installation is offered by 4900 heavy duty deadlatches. Specifications bolt holdback while bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging. Auxiliary latchpin stainless steel. Case measures 7/8” x 5-13/16” x depth. Standard package individually boxed with flat and radius faceplates, strike, and machine screws for mounting. Cylinders with ms® cams can be readily obtained from most cylinder manufacturers. Solid brass. Also retrofits to existing 4500 and 4700 deadlatch preparations. Steel with corrosion-resistant plating. Screw-fastened tube spacer brackets allow for cleaner removal when tab mounting. Depth varies by backset (see table on catalog page). See cylinders for cylinder make, thumbturn and trim ring information. Interchangeable, without stile modification, with any ms1850a or ms1850s deadbolt of same backset and faceplate shape.  . A reverse turn of the key while bolt is held retracted retains the bolt, to allow two-way traffic for applications which require free entrance at certain times and exit-only at other times. Order cylinders, paddles, handles, or lever operators separately. Deadlocks latch bolt to prevent “loiding” or case-knife entry.

 

Adams Rite 4511-36-102-313 Standard Duty Deadlatch with 1-18 Backset and Radius Faceplate RH or LHR with a 2-58 Strike 313 Dark Bronze Anodized Finish #ad

Adams Rite 4511-36-102-313 Standard Duty Deadlatch with 1-1/8″ Backset and Radius Faceplate. RH or LHR with a 2-5/8″ Strike. 313 Dark Bronze Anodized Finish.

Adams Rite 4511-36-102-313 Standard Duty Deadlatch with 1-1/8″ Backset and Radius Faceplate. RH or LHR with a 2-5/8″ Strike. 313 Dark Bronze Anodized Finish. #ad - Case measures 1” x 5-13/16” x depth. Steel with corrosion-resistant plating. Latchbolt 1/2” x 1” x 1/2” throw. Cylinders with ms® cams can be readily obtained from most cylinder manufacturers. Uses any standard mortise cylinder with ms® dimensioned cam. Cylinder cam operable by any standard mortise cylinder with ms® cam, dimensioned as shown. Handing is reversible without special tools. Strikes standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush. Standard package individually boxed with strike, and machine screws for mounting. All metal with hardened steel internal pins. Deadlocks latch bolt to prevent “loiding” or case-knife entry. A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times. Specifications bolt holdback while bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging. To hold bolt retracted, push it in and secure by reverse turn of key. Interchangeable, without stile modification, with any ms1850a or ms1850s operation turn key or operate handle to retract spring-loaded latchbolt. Depth varies by backset (see table on catalog page). Cylinders, paddles, and handles available separately.  . Auxiliary bolt all metal. Available separately radius strike for opposite stile in paired doors longer strike (4901) to cover slot strike of ms lock long lip strikes for centerhung doors. See cylinders for cylinder make, thumbturn and trim ring information. Function the 4510 standard duty deadlatch offers flexibility of traffic control during and after business hours.

 

Rockwood BF157ABTB16313 Aluminum 90-Degree Offset Door Pull 1 Diameter x 9 Center-to-Center Back To Back Mounting for 1-34 Door Dark Bronze Anodized Finish #ad

Rockwood BF157ABTB16.313 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 9″ Center-to-Center, Back To Back Mounting for 1-3/4″ Door, Dark Bronze Anodized Finish

Rockwood BF157ABTB16.313 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 9″ Center-to-Center, Back To Back Mounting for 1-3/4″ Door, Dark Bronze Anodized Finish #ad - Meets ansi a1566 j402 specifications and is ada compliant. Includes mounting hardware. Aluminum 90-degree offset door pull set with a dark bronze anodized finish and a back-to-back mounting style for use in pairs on a standard 1-3/4″ thick door. Each pull has a 9″ center-to-center length, 10″ overall length, 1″ diameter, 3-1/2″ projection, and 2-1/2″ clearance, and is offset 4″.

 

Hager 780-210 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges Full Surface Dark Bronze Anodized 83 Length Pack of 1 #ad

Hager 780-210 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges, Full Surface, Dark Bronze Anodized, 83″ Length (Pack of 1)

Hager 780-210 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges, Full Surface, Dark Bronze Anodized, 83″ Length (Pack of 1) #ad - Roton continuous hinges have been utilized in hospitals, schools, hotels, offices, airports, stadiums, storefronts, and commercial and industrial buildings in new construction and retrofit applications for over 30 years. Because of this, we offer our lifetime warranty with confidence. Hager roton hinges are unique, geared hinges developed to outperform most other entrance components because the weight of the door is distributed along the full length of the door frame. Hager roton continuous geared hinges are designed for superior performance.

 

Pemko Fluted Saddle Threshold Dark Bronze Anodized Aluminum 36L x 5W x 025H #ad

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 36″L x 5″W x 0.25″H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 36″L x 5″W x 0.25″H #ad - Tested and approved under ul10c for fire. To use a saddle threshold in an offset condition, use an elevator.

 

Rockwood 110313 Aluminum Straight Solid Door Pull for 1-34 Door 1 Diameter x 8 Center-to-Center Type 1 Through-Bolt Mount Dark Bronze Anodized Finish #ad

Rockwood 110.313 Aluminum Straight Solid Door Pull for 1-3/4″ Door, 1″ Diameter x 8″ Center-to-Center, Type 1 Through-Bolt Mount, Dark Bronze Anodized Finish

Rockwood 110.313 Aluminum Straight Solid Door Pull for 1-3/4″ Door, 1″ Diameter x 8″ Center-to-Center, Type 1 Through-Bolt Mount, Dark Bronze Anodized Finish #ad - The pull has an 8″ center-to-center length, 9″ overall length, 1″ diameter, 3″ projection, and 2″ clearance. 313 aluminum straight solid door pull has a dark bronze anodized finish (rockwood/bhsm number 313/710), has a type 1 through bolt mounting style, and is used to pull open a standard 1-3/4″ thick door. Rockwood manufacturing company manufactures door hardware. The rockwood 110. The company, founded in 1946, is headquartered in rockwood, pa. What’s in the boxaluminum straight solid door pull1/4″-20 x 2-1/4″ through boltsfinish washers.

 

Rockwood BF158313 Aluminum 90-Degree Offset Door Pull 1 Diameter x 12 Center-to-Center Through Bolt Mounting for 1-34 Door Dark Bronze Anodized Finish #ad

Rockwood BF158.313 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 12″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Dark Bronze Anodized Finish

Rockwood BF158.313 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 12″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Dark Bronze Anodized Finish #ad - Includes mounting hardware. Aluminum 90-degree offset door pull with a dark bronze anodized finish and a through-bolt mounting style for a standard 1-3/4″ thick door. Pull has a 12″ center-to-center length, 13″ overall length, 1″ diameter, 3-1/2″ projection, and 2-1/2″ clearance, and is offset 4″. Meets ansi a1566 j402 specifications and is ada compliant.

 

Adams Rite 7140-310-313 Electric Strike for ANSI size for Hollow Metal and Wood Jambs 12 Volt DC Fail Secure 313 Dark Bronze Anodized Finish #ad

Adams Rite 7140-310-313 Electric Strike for ANSI size for Hollow Metal and Wood Jambs. 12 Volt DC. Fail Secure. 313 Dark Bronze Anodized Finish.

Adams Rite 7140-310-313 Electric Strike for ANSI size for Hollow Metal and Wood Jambs. 12 Volt DC. Fail Secure. 313 Dark Bronze Anodized Finish. #ad - Fits existing prep for discontinued adams rite 7040, 7840n, 7850 electric strikes.  . However, ac intermittent solenoid must not be used continuously in either. Description 7140 electric strikes with 4-7/8” faceplates are designed for adams rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. Case approximately 1” x 3-3/8” x 1-5/8” deep. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Strike lip basic 7140 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Specifications fail-safe/fail-secure field convertible from one mode to the other. Strike opening 5/8” x 1-7/16” x 1/2” deep. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number. Function remote electrical control of any door equipped with an adams rite 4500, 4700, or 4900 series (or similar) deadlatch or cylindrical (key-in-knob/lever) type locksets with 1/2” to 5/8” latchbolt projection. Strike accepts bolt of any adams rite 4500, 4700 (discontinued), or 4900 deadlatch or cylindrical latches. Voltage available in 12 or 24 volt ac and dc. Zinc aluminum alloy. Extremely compact mechanism fits into aluminum jamb sections as shallow as 1-5/8”. Faceplate measures 1-1/4 x 4-7/8” faceplate is flat, with square corners. Dc continuous units are silent, ac intermittent units “buzz” on operation. For use in hollow metal or wood doors and jambs. Bolt retainer jaw is stainless steel.

 

Hager 780-112 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges Concealed Leaf Dark Bronze Anodized 83” Length #ad

Hager 780-112 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges, Concealed Leaf, Dark Bronze Anodized, 83” Length

Hager 780-112 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges, Concealed Leaf, Dark Bronze Anodized, 83” Length #ad - Because of this, we offer our lifetime warranty with confidence. Hager roton continuous geared hinges are designed for superior performance. Roton continuous hinges have been utilized in hospitals, schools, hotels, offices, airports, stadiums, storefronts, and commercial and industrial buildings in new construction and retrofit applications for over 30 years. Hager roton hinges are unique, geared hinges developed to outperform most other entrance components because the weight of the door is distributed along the full length of the door frame.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.