Top 23 Best Hazmats

 

Aluminum Flip File Placard 10-Legend Worded Set - 1375 x 1375 Galvanized Steel Back Plate with 2 Clipped Corners - J J Keller Associates - Complies with DOT Hazmat Placard Requirements #ad

Aluminum Flip File Placard, 10-Legend Worded Set – 13.75″ x 13.75″ Galvanized Steel Back Plate with 2 Clipped Corners – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements

Aluminum Flip File Placard, 10-Legend Worded Set – 13.75″ x 13.75″ Galvanized Steel Back Plate with 2 Clipped Corners – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements #ad - Back plate manufactured of 016″ galvanized steel (30% post-consumer recycled content) and measures side to side, 1375″ (350mm) left to right (corners), 1856″ (472mm) top to bottom (corners), 1496″ (380mm). Hazmat placard set legends are screen printed with fade-resistant uv inks and manufactured of 024″ aluminum (75% post-consumer recycled content) the legends included are dangerous, class 3 flammable liquid, class 8 corrosive, division 21 flammable gas, division 14 explosives, division 22 non-flammable gas, division 51 oxidizer, division 43 dangerous when wet, class 7 radioactive, division 61 toxic, and a blank. J j keller dura-clip fasteners stop clip arms from being dislodged stainless steel reinforced quick-release clamps hold hazardous materials placards securely in place available with clipped corners on top and bottom to accommodate roll-up doors and trailers. Flip placards meet dot placarding specifications of 49 cfr 172519 for hazardous materials identification. Hazmat placards comply with iso 9000 green initiative, california buy recycled program, and epa comprehensive procurement guidelines (cpg) program.

 

3267 Placard Class 8 Corrosive 25-pk - 1075 x 1075 Removable Self Adhesive Economy Vinyl for Short-Term Applications - J J Keller Associates - Complies with DOT Hazmat Placard Requirements #ad

3267 Placard, Class 8 Corrosive 25-pk. – 10.75″ x 10.75″ Removable Self Adhesive Economy Vinyl for Short-Term Applications – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements

3267 Placard, Class 8 Corrosive 25-pk. – 10.75″ x 10.75″ Removable Self Adhesive Economy Vinyl for Short-Term Applications – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements #ad - Up to 1-year substrate outdoor durability depending on preparation, application, geographic area and exposure conditions clean removability for approximately 6 months (depending on the substrate it is applied to and environmental exposure to uv and temperature) adhesive will have a tendency to become permanent beyond 6 months. Corrosive placards are pre-numbered with 4-digit identification number (un 3267), hazard class (8) and dot-required symbol. Class 8 placards meet dot placarding specifications of 49 cfr § 172519 for hazardous materials identification. Hazmat placards measure 10-3/4″ x 10-3/4″ and are made of 0032″ thick flexible vinyl film with removable acrylic pressure sensitive adhesive backing and 50# peel-off liner designed for short-term applications with a service temperature range of -40˚f to +200˚f and minimum application temperature of +40°f. Use hazmat placards for shipping corrosives (corrosive liquid, basic, organic, nos).

 

JJ Keller 39 Hazmat Compliance Pocketbook #ad

J.J. Keller 39 Hazmat Compliance Pocketbook

J.J. Keller 39 Hazmat Compliance Pocketbook #ad - Softbound book with 592 pages. Covers shipping papers, placarding, loading/unloading and more. Important, this pocketbook (42456) is not the latest edition and does not comply with phmsa’s 2017 hm-215n rulemaking and subsequent revisions.

 

NMC HW5AL Non-Hazardous Waste Optional Information Shipper Address City State Zip Contents_ Label - Roll of 500 PS Paper Hazmat Label #ad

NMC HW5AL Non-Hazardous Waste Optional Information: Shipper, Address, City, State, Zip, Contents_ Label – [Roll of 500] PS Paper Hazmat Label

NMC HW5AL Non-Hazardous Waste Optional Information: Shipper, Address, City, State, Zip, Contents_ Label – [Roll of 500] PS Paper Hazmat Label #ad - Hazmat label safety compliance at industrial and manufacturing facilities often mandates the use of appropriate labels to help warn workers, visitors, and passerby about the accumulated waste or other contents that are considered harmful when handling. Material it is made of paper with pressure sensitive adhesive backing and can be mounted on smooth, curved or irregular surfaces. Safety label such labels are often seen on drums or containers to identify non-hazardous waste that poses no threat this label has blank spaces to document the shipper’s information and details of the content. Visibility this hazardous material label has the legend “non-hazardous waste optional information shipper__, address__, city, state, zip__, contents__” in bold letters and contrasting colors to ensure clear visibility in most lighting conditions. Specifications the square pressure sensitive paper label is 6 in wide and high it has white text on a green base with green text on a white base this label is available in a roll of 500 pieces.

 

Lakeland Level B Rear-Entry Encapsulated Suit Dark Green ChemMax 4 Size M Hazmat Suit PBL40450-MD #ad

Lakeland Level B Rear-Entry Encapsulated Suit, Dark Green, ChemMax 4 Size M Hazmat Suit PBL40450-MD

Lakeland Level B Rear-Entry Encapsulated Suit, Dark Green, ChemMax 4 Size M Hazmat Suit PBL40450-MD #ad - ✪ Heavy duty design with elastic hood and cuffs, full booties and reinforced zipper the heavy duty all-purpose coverall by tiger tough gives strong resistance, enjoyable protection and functionality. ✪ Engineered for maximum protection, durability and comfort, use conveniently for all purposes get strong protection against lead, asbestos, itchy fiberglass, mold, hazardous fumes and generally any environment that requires protection. ✪ Numerous uses, applications range from agricultural to painting to mold or lead remediation, any environment requiring personal protective equipment buy risk-free as our protective heavy duty protective coveralls for men come with hassle back money-back guarantee. ✪ Doesn’t limit your movements designed to maximize range of motion it almost feels like you aren’t wearing a protective suit and you are still protected bend, kneel, stretch, it is flexible and feels elastic. ✪ breathable & lightweight, it resists dry particles and repels splashes with amazing the tear and puncture resistance our white heavy duty coveralls get you the needed protection without feeling like a burden.

 

New Pig Hazmat Mat Pad 14 oz Absorbency Per Pad Absorbs Hazardous Chemicals - Acids Bases Unknowns Lightweight 20 x 15 Pink 200 Pads MAT302 #ad

New Pig Hazmat Mat Pad, 14 oz Absorbency Per Pad, Absorbs Hazardous Chemicals – Acids, Bases & Unknowns, Lightweight, 20″ x 15″, Pink (200 Pads), MAT302

New Pig Hazmat Mat Pad, 14 oz Absorbency Per Pad, Absorbs Hazardous Chemicals – Acids, Bases & Unknowns, Lightweight, 20″ x 15″, Pink (200 Pads), MAT302 #ad - Chemical-resistant mat won’t degrade or cause a dangerous reaction upon contact with corrosive spills. Absorbs the widest range of acids, bases and unknown liquids, even those with high concentrations like 98 percent sulfuric acid and 30 percent sodium hydroxide. Eight layers of 100 percent polypropylene are thermally bonded to make pig mat the strongest mat on the market won’t rip, tear or fray even when saturated. Highly absorbent, fine-fiber construction won’t leave behind liquids or fiber residue. Exclusive dimple pattern speeds wicking of liquid throughout mat for faster, easier cleanup.

 

ChemSplash 1 Chemical Splash Protection Suit Yellow for Hazmat Paint and Light Duty Chemicals Serged Seams Case of 12 L Attached Hood Elastic Wrist Ankle #ad

ChemSplash 1 Chemical Splash Protection Suit (Yellow) for Hazmat, Paint, and Light Duty Chemicals, Serged Seams (Case of 12) (L, Attached Hood, Elastic Wrist & Ankle)

ChemSplash 1 Chemical Splash Protection Suit (Yellow) for Hazmat, Paint, and Light Duty Chemicals, Serged Seams (Case of 12) (L, Attached Hood, Elastic Wrist & Ankle) #ad - Built for the job professional workers in nuclear, oil & gas, industrial, and remediation fields trust international enviroguard’s chemsplash 1 line for everyday comfort not offered by plastic or standard latex suits additional styles available include aprons and sleeves. Affordable confidence chemsplash 1 styles featuring a hood and boots offer excellent protection for blackwater, pesticides, alkalis, blood, acids, and other noxious chemcials for more protective clothing, explore our chemsplash 2 and body filter 95+ brands. 100% satisfaction, money back guarantee from international enviroguard we guarantee you will love your chemsplash protection suits or your money back if for any reason you aren’t happy with your purchase, simply return it for a full refund buy from trusted amazon retailer, disposable protective gear. The ultimate light duty protective coverall chemsplash 1 products offer ergonomic advantages for lab and production environments, with coveralls, chemical apron, and full body suit options to protect against common particulates as well as pesticide and new paint. Built for action a comfortable neck, one-piece shoulder construction, and gusseted crotch make chemsplash 1 one of the most comfortable reduced spray and dry particle safety clothing brands on the market a wide array of sizes makes them a great choice for men, women, big & tall, home, and work.

 

1993 Placard Class 3 Flammable Liquid 25-pk - 1075 x 1075 Removable Self Adhesive Economy Vinyl for Short-Term Applications - J J Keller - Complies with DOT Hazmat Placard Requirements #ad

1993 Placard, Class 3 Flammable Liquid 25-pk. – 10.75″ x 10.75″ Removable Self Adhesive Economy Vinyl for Short-Term Applications – J. J. Keller – Complies with DOT Hazmat Placard Requirements

1993 Placard, Class 3 Flammable Liquid 25-pk. – 10.75″ x 10.75″ Removable Self Adhesive Economy Vinyl for Short-Term Applications – J. J. Keller – Complies with DOT Hazmat Placard Requirements #ad - Up to 1-year substrate outdoor durability depending on preparation, application, geographic area and exposure conditions clean removability for approximately 6 months (depending on the substrate it is applied to and environmental exposure to uv and temperature) adhesive will have a tendency to become permanent beyond 6 months. Flammable liquid placards are pre-numbered with 4-digit identification number (un 1993), hazard class (3) and dot-required symbol. Hazard class 3 placards meet dot placarding specifications of 49 cfr § 172519 for hazardous materials identification. Use hazmat placards for shipping flammable liquid (diesel, nos). Hazmat placards measure 10-3/4″ x 10-3/4″ and are made of 0032″ thick flexible vinyl film with removable acrylic pressure sensitive adhesive backing and 50# peel-off liner designed for short-term applications with a service temperature range of -40˚f to +200˚f and minimum application temperature of +40°f.

 

FGS Haz-Mat Yellow Latex Nuke Boots Cover Disposable  Rubber  Nuke Boot  HAZMAT  Abatement  Over the Boot Shoe Cover Protection  Non-Slip Sole  Waterproof 2XL #ad

FGS Haz-Mat Yellow Latex Nuke Boots Cover| Disposable | Rubber | Nuke Boot | HAZMAT | Abatement | Over the Boot, Shoe Cover Protection | Non-Slip Sole | Waterproof (2XL)

FGS Haz-Mat Yellow Latex Nuke Boots Cover| Disposable | Rubber | Nuke Boot | HAZMAT | Abatement | Over the Boot, Shoe Cover Protection | Non-Slip Sole | Waterproof (2XL) #ad - Optimal fit available in 2xl and 3xl securely fits over shoes and boots, comfortable to walk in. Durable durable latex material endures use through dangerous and industrial work environments while protecting shoes/boots. Protection protects against various chemicals, liquids, gases, water and dangerous substances. Measurements 3xl toe to heel 13″, heel to calf 12″, 2xl toe to heel 12″, heel to calf 12″. Textured sole textured sole provides traction, non-slip surface protects you against slips and falls.

 

Aluminum Flip File Placard 8-Legend Worded Set - 1375 x 1375 Galvanized Steel Back Plate with 2 Clipped Corners - J J Keller Associates - Complies with DOT Hazmat Placard Requirements #ad

Aluminum Flip File Placard, 8-Legend Worded Set – 13.75″ x 13.75″ Galvanized Steel Back Plate with 2 Clipped Corners – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements

Aluminum Flip File Placard, 8-Legend Worded Set – 13.75″ x 13.75″ Galvanized Steel Back Plate with 2 Clipped Corners – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements #ad - Flip placards meet dot placarding specifications of 49 cfr 172519 for hazardous materials identification. J j keller dura-clip fasteners stop clip arms from being dislodged stainless steel reinforced quick-release clamps hold hazardous materials placards securely in place available with clipped corners on top and bottom to accommodate roll-up doors and trailers. Hazmat placard set legends are screen printed with fade-resistant uv inks and manufactured of 024″ aluminum (75% post-consumer recycled content) the legends included are dangerous, class 3 flammable liquid, class 8 corrosive, division 21 flammable gas, division 61 inhalation hazard, division 51 oxidizer, division 61 poison, division 22 non-flammable gas, and a blank. Back plate manufactured of 016″ galvanized steel (30% post-consumer recycled content) and measures side to side, 1375″ (350mm) left to right (corners), 1856″ (472mm) top to bottom (corners), 1496″ (380mm). Hazmat placards comply with iso 9000 green initiative, california buy recycled program, and epa comprehensive procurement guidelines (cpg) program.

 

Golden Scute Disposable Coveralls with Attached Hood Elastic Cuff Zipper Front White Coverall Hazmat Suit for Men Painter 6 Pack Large #ad

Golden Scute Disposable Coveralls with Attached Hood & Elastic Cuff, Zipper Front White Coverall Hazmat Suit for Men, Painter (6 Pack, Large)

Golden Scute Disposable Coveralls with Attached Hood & Elastic Cuff, Zipper Front White Coverall Hazmat Suit for Men, Painter (6 Pack, Large) #ad - Longer zipper extends to chin for complete coverage of neck area with an elastic opening for tighter fit at wrist. Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask. Elastic around hood & wrists with set sleeve pattern for greater arm movement and surged seams. Helps provide a basic barrier protection against light liquid splashes, hazardous dusts, varnish, resins, fiberglass, paints and bacteria. Ideal for dirty jobs, sanding, painting and more.

 

ESP XMBYPF Polypropylene Extra Heavy Weight MeltBlown Fine Fiber Chemical Hazmat Absorbent Pad 18 Length x 15 Width Yellow 100 Per Bale #ad

ESP XMBYPF Polypropylene Extra Heavy Weight MeltBlown Fine Fiber Chemical Hazmat Absorbent Pad, 18″ Length x 15″ Width, Yellow (100 Per Bale)

ESP XMBYPF Polypropylene Extra Heavy Weight MeltBlown Fine Fiber Chemical Hazmat Absorbent Pad, 18″ Length x 15″ Width, Yellow (100 Per Bale) #ad - Core is made from a high loft polypropylene. This sorbent is made up of three layers sonically bonded together. Pads are boxed making shipping economical. Top and bottom layers are made from micro fibers of densely woven polypropylene. Pads are perforated down their center.

 

Labelmaster ZEZ91993 UN 1993 Combustible Liquid Hazmat Placard E-Z Removable Vinyl Pack of 25 #ad

Labelmaster ZEZ91993 UN 1993 Combustible Liquid Hazmat Placard, E-Z Removable Vinyl (Pack of 25)

Labelmaster ZEZ91993 UN 1993 Combustible Liquid Hazmat Placard, E-Z Removable Vinyl (Pack of 25) #ad - O. They are printed on e-z removable vinyl that can be removed with little or no residue remaining on the surface, and is perfect for both long-term and short-term shipping needs. Play it safe when transporting dangerous goods with labelmaster’s un 1993 combustible liquid placards. These hazard class 3 placards 273 x 273mm and are sold in packs of 25 or cases of 900. S, fuel oil and meeting the requirements of 49 cfr 172. Pre-printed with the four-digit un number, these dot placards are what you need for shipping flammable liquids, n. 500 for domestic and international shipments of hazardous materials by highway, rail and water.

 

1075 Placard Division 21 Flammable Gas 25-pk - 1075 x 1075 Removable Self Adhesive Vinyl for Temporary Applications - J J Keller Associates - Complies with DOT Hazmat Placard Requirements #ad

1075 Placard, Division 2.1 Flammable Gas 25-pk. – 10.75″ x 10.75″ Removable Self Adhesive Vinyl for Temporary Applications – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements

1075 Placard, Division 2.1 Flammable Gas 25-pk. – 10.75″ x 10.75″ Removable Self Adhesive Vinyl for Temporary Applications – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements #ad - Flammable gas placards are pre-numbered with 4-digit identification number (un 1075), hazard class (2) and dot-required symbol. Class 2 placards meet dot placarding specifications of 49 cfr § 172519 for hazardous materials identification. Hazmat placards measure 10-3/4″ x 10-3/4″ and are made of 0034″ thick flexible vinyl film with removable acrylic pressure sensitive adhesive backing and 90# peel-off liner designed for temporary applications with a service temperature range of -40˚f to +200˚f and minimum application temperature of +40°f. Up to 5-year substrate outdoor durability depending on preparation, application, geographic area and exposure conditions clean removability for approximately 6 months (depending on the substrate it is applied to and environmental exposure to uv and temperature) adhesive will have a tendency to become permanent beyond 6 months. Use hazmat placards for shipping flammable gas (liquified petroleum gas).

 

Labelmaster 126CT-206 7 Legend Hazmat Flip Placard System for Tankers Full Frame #ad

Labelmaster 126CT-206 7 Legend Hazmat Flip Placard System for Tankers, Full Frame

Labelmaster 126CT-206 7 Legend Hazmat Flip Placard System for Tankers, Full Frame #ad - Duo-flip’s exclusive, deep-formed aluminum frame provides stability and excellent wind protection. Duo-flip 7-legend flip placard system for tankers with full frame is sold per each. Panels lock in place with four stainless steel pressure fasteners. For the ultimate in convenience, flexibility and time saving, duo-flip allows you to change both dot placard legends and id numbers in seconds to match your commodity. Notches in the aluminum panels allow you to flip numerals without interference. This duo-flip 7-legend flip placard system includes 9 placard panels in a single frame combustible 3 flammable 3 oxidizer 5. Equipped with extra sturdy mounting holes, full frames fit virtually any type of cargo tank. 1 inhalation hazard 6 poison 6 corrosive 8 miscellaneous dangerous goods 9 blank self-contained,. 032 aluminum alloy placard panels slide over easily on four aluminum hinges.

 

Lakeland Level B Rear-Entry Encapsulated Suit Dark Green Size 4X ChemMax 4 Hazmat Suit PBL40450-4X Lakeland 6EHZ2 Size 4X #ad

Lakeland Level B Rear-Entry Encapsulated Suit, Dark Green, Size 4X, ChemMax 4, Hazmat Suit PBL40450-4X, Lakeland 6EHZ2 Size 4X

Lakeland Level B Rear-Entry Encapsulated Suit, Dark Green, Size 4X, ChemMax 4, Hazmat Suit PBL40450-4X, Lakeland 6EHZ2 Size 4X #ad - Flame resistant treatment offers secondary protection against heat and flame. Reinforcement gusset between the legs to help provide increased durability during bending and squatting. Two-way zipper with sealable storm flap for convenience and to help provide additional protection. Three panel hood design helps provide a more comfortable fit and a sleek, low-profile style. Made with a breathable material that helps reduce heat build-up and promote comfortable wear. Price for pack of 2.

 

Labelmaster HSN4800 UN2794 Batteries Wet Filled With Acid Hazmat 475 x 4 Pack of 500 #ad

Labelmaster HSN4800 UN2794 Batteries Wet Filled With Acid, Hazmat, 4.75″ x 4″ (Pack of 500)

Labelmaster HSN4800 UN2794 Batteries Wet Filled With Acid, Hazmat, 4.75″ x 4″ (Pack of 500) #ad - They also feature outstanding chemical and abrasion resistance. Simplify your shipping label solution with label master’s pre-printed shipping name corrosive labels. 400) with the marking requirements of 172. A two-in-one solution, combining the label (172. Once affixed, they won’t fade or fall off. In addition to complying with directives set by the dot, these also meet the design and durability standards of 49 cfr, icao and other international air regulations. Black and white, these paper labels are sized at 100 x 120mm (standard tab) and sold in rolls of 500. 300, the un2794 batteries, wet, filled with acid label comes ready for application. You’ll be worry-free as these hazard class 8 labels are printed with light-fast inks for fade resistance and adhesives are formulated for use in various climates and environments as well as strong holds on corrugated boxes.

 

Aluminum Flip File Placard 3-Legend Numbered Set - 1375 x 1375 Unpainted Back Plate with Rounded Corners - J J Keller Associates - Complies with DOT Hazmat Placard Requirements #ad

Aluminum Flip File Placard, 3-Legend Numbered Set – 13.75″ x 13.75″ Unpainted Back Plate with Rounded Corners – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements

Aluminum Flip File Placard, 3-Legend Numbered Set – 13.75″ x 13.75″ Unpainted Back Plate with Rounded Corners – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements #ad - Stainless steel spring clips hold hazardous materials placards securely in place. Heavy 032″ aluminum back plate for wind protection measures side to side (flanges), 1375″ (350mm) left to right (corners), 1856″ (472mm) top to bottom (corners), 1856″ (472mm) aluminum contains 75% post-consumer recycled content. Hazmat placard set is in a fade-resistant acrylic paint and includes these legends class 3 flammable liquid un 1203, class 3 flammable liquid un 1993, class 3 flammable liquid un 1223, blank. Hazmat placards comply with iso 9000 green initiative, california buy recycled program, and epa comprehensive procurement guidelines (cpg) program. Flip placards meet dot placarding specifications of 49 cfr 172519 for hazardous materials identification.

 

1993 Placard Class 3 Flammable Liquid - 1075 x 1075 Permanent Self Adhesive Vinyl - J J Keller Associates - Complies with DOT Hazmat Placard Requirements #ad

1993 Placard, Class 3 Flammable Liquid – 10.75″ x 10.75″ Permanent Self Adhesive Vinyl – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements

1993 Placard, Class 3 Flammable Liquid – 10.75″ x 10.75″ Permanent Self Adhesive Vinyl – J. J. Keller & Associates – Complies with DOT Hazmat Placard Requirements #ad - Use hazmat placards for shipping flammable liquid (diesel, nos). Hazard class 3 placards meet dot placarding specifications of 49 cfr § 172519 for hazardous materials identification. Hazmat placards measure 10-3/4″ x 10-3/4″ and are made of 0034″ thick flexible vinyl film with high-tack permanent acrylic pressure sensitive adhesive backing and 90# peel-off liner designed for permanent applications with a service temperature range of -40˚f to +200˚f and minimum application temperature of +40°f. Up to 5-year substrate outdoor durability depending on preparation, application, geographic area and exposure conditions. Flammable liquid placards are pre-numbered with 4-digit identification number (un 1993), hazard class (3) and dot-required symbol.

 

ChemSplash 1 Chemical Splash Taped Seams Protection Suit Yellow for Hazmat Paint and Light Duty Chemicals Case of 6 M Elastic Wrist Ankle #ad

ChemSplash 1 Chemical Splash Taped Seams Protection Suit (Yellow) for Hazmat, Paint, and Light Duty Chemicals (Case of 6) (M, Elastic Wrist & Ankle)

ChemSplash 1 Chemical Splash Taped Seams Protection Suit (Yellow) for Hazmat, Paint, and Light Duty Chemicals (Case of 6) (M, Elastic Wrist & Ankle) #ad - The ultimate light duty protective coverall chemsplash 1 products offer ergonomic advantages for lab and production environments, with coveralls, chemical apron, and full body suit options to protect against common particulates as well as pesticide and new paint. Built for action a comfortable neck, one-piece shoulder construction, and gusseted crotch make chemsplash 1 one of the most comfortable reduced spray and dry particle safety clothing brands on the market a wide array of sizes makes them a great choice for men, women, big & tall, home, and work. 100% satisfaction, money back guarantee from international enviroguard we guarantee you will love your chemsplash protection suits or your money back if for any reason you aren’t happy with your purchase, simply return it for a full refund buy from trusted amazon retailer, disposable protective gear. Affordable confidence chemsplash 1 styles featuring a hood and boots offer excellent protection for blackwater, pesticides, alkalis, blood, acids, and other noxious chemcials for more protective clothing, explore our chemsplash 2 and body filter 95+ brands. Built for the job professional workers in nuclear, oil & gas, industrial, and remediation fields trust international enviroguard’s chemsplash 1 line for everyday comfort not offered by plastic or standard latex suits additional styles available include aprons and sleeves.

 

30 Gallon Universal Spill Kit Pro Grade 75 Pc Overpack Drum 50 Heavy Duty Pads 15x19 2 Socks 3x12 6 Socks 3x4 5 Pillows 18x18 Chemical Gloves Hazmat Bags Goggles Guide Book Sign #ad

30 Gallon Universal Spill Kit, Pro Grade, 75 Pc: Overpack Drum, 50 Heavy Duty Pads 15″x19″, 2 Socks 3″x12′, 6 Socks 3″x4′, 5 Pillows 18″x18″, Chemical Gloves, Hazmat Bags, Goggles, Guide Book, Sign

30 Gallon Universal Spill Kit, Pro Grade, 75 Pc: Overpack Drum, 50 Heavy Duty Pads 15″x19″, 2 Socks 3″x12′, 6 Socks 3″x4′, 5 Pillows 18″x18″, Chemical Gloves, Hazmat Bags, Goggles, Guide Book, Sign #ad - Absorbency 40 gallons. Safety goggles neoprene chemical gloves emergency response guidebook spill kit sign. Includes dot approved heavy duty overpack drum, 7 haz mat bags. 50, heavy duty universal spill pads 15″ x 19″, 2, 3″ x 12′ universal sorbent socks, 6, 3″ x 4′ universal sorbent socks. 5, 18″ x 18″ universal sorbent pillows.

 

EnviroMet KT-Plug Hazmat Containment Plug Kit #ad

EnviroMet KT-Plug Hazmat Containment Plug Kit

EnviroMet KT-Plug Hazmat Containment Plug Kit #ad - X 3″, cone, 0. X 4″, cone, 1″dia. 5″ dia. Each plug kit is made up of the following wood plug sizes wedge, 1. 5″ dia. 5″ x 1. This kit includesplug ‘n’ dike (10oz) and an assortment of 4 wood plugs. 5″ x 4″, cone, 1. X 2″. An essential addition to any spill kit. Use individually or combnined to temporarily plug a punctured drum or tank, or seal a punctured hose.

 

New Pig Hazmat Handy Pad in Dispenser Box Absorbs Hazardous Materials 12-Ounce Absorbency Per Pad 13 x 10 100 Pads MAT351 #ad

New Pig Hazmat Handy Pad in Dispenser Box, Absorbs Hazardous Materials, 12-Ounce Absorbency Per Pad, 13″ x 10″, (100 Pads), MAT351

New Pig Hazmat Handy Pad in Dispenser Box, Absorbs Hazardous Materials, 12-Ounce Absorbency Per Pad, 13″ x 10″, (100 Pads), MAT351 #ad - Highly absorbent, fine-fiber construction won’t leave behind liquids or fiber residue. Chemical-resistant mat won’t degrade or cause a dangerous reaction upon contact with corrosive spills. Absorbs the widest range of acids, bases and unknown liquids, even those with high concentrations like 98 percent sulfuric acid and 30 percent sodium hydroxide. Eight layers of 100 percent polypropylene are thermally bonded to make pig mat the strongest mat on the market won’t rip, tear or fray even when saturated. Exclusive dimple pattern speeds wicking of liquid throughout mat for faster, easier cleanup.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.