Top 20 Best Flex Hones

 

Brush Research 08303 Chamber Flex-Hone Silicon Carbide 20 Gauge 400 Grit Pack of 1

Brush Research 08303 Chamber Flex-Hone, Silicon Carbide, 20 Gauge, 400 Grit (Pack of 1)

Brush Research 08303 Chamber Flex-Hone, Silicon Carbide, 20 Gauge, 400 Grit (Pack of 1) - For smoothbores only. The unique fingers gently smooth the metal, creating a more uniform surface that resists wear, corrosion and reduces fouling. The end result is a more polished smoothbore with a beautiful finish. The stem wire is covered with a protective shrink tube coating to protect the barrel. Flex-hone tools will improve the look of your shotgun barrel, while making it easier to maintain.

 

4 18 105mm Flex-Hone Cylinder Hone 320 grit silicon carbide

4 1/8″ (105mm) Flex-Hone Cylinder Hone 320 grit silicon carbide

4 1/8″ (105mm) Flex-Hone Cylinder Hone 320 grit silicon carbide - Creates the required cross hatch for piston ring seating. The abrasive (points) globules each have independent suspension that assures the flex-hone® to be self-centering, self aligning to the bore, and selfcompensating for wear. A resilient, flexible, honing tool with a soft cutting action.

 

3 76mm Flex-Hone Cylinder Hone Tool 120 Grit Silicon Carbide

3″ (76mm) Flex-Hone Cylinder Hone Tool 120 Grit (Silicon Carbide)

3″ (76mm) Flex-Hone Cylinder Hone Tool 120 Grit (Silicon Carbide) - Hone is made in usa by brush research manufacturing. Flexible cylinder hone made of silicon carbide. Perfect for bore honing and cylinder refinishing. Hone is self centering and can be used with 3/8″ or 1/2″ chuck drill. The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).

 

Brush Research FLEX-HONE Cylinder Hone GB Series Silicon Carbide Abrasive 4-18 105 mm Diameter 240 Grit Size

Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-1/8″ (105 mm) Diameter, 240 Grit Size

Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-1/8″ (105 mm) Diameter, 240 Grit Size - Because of its unique construction, the flex-hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. Flexible honing with the flex-hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. A choice of 11 different grit selections are available for precise control of finish parameters. These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. The flex-hone® tool was originally created by brush research manufacturing to deglaze cylinder walls in automotive applications. Any type or size of cylinder can benefit from the flex-hone®. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. The flex-hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Brush research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the flex-hone tool in 1972. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results. Flex-hone® tools are also very effective for deburring cross drilled holes, port radiusing and edge blending.

 

Brush Research 08950 Rifle Chamber Flex-Hone Silicon Carbide 800 Grit For 762X39mm SAAMI Pack of 1

Brush Research 08950 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 7.62X39mm SAAMI (Pack of 1)

Brush Research 08950 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 7.62X39mm SAAMI (Pack of 1) - To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential. For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice. The result achieved with these flex-hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle. Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle’s chamber. 1-5/8-inches abrasive part.

 

Performance Tool W80629 2-12 Brake Rotor Hone 120 Grit Flexible Ball Stones 1 Pack

Performance Tool W80629 2-1/2″ Brake Rotor Hone 120 Grit Flexible Ball Stones., 1 Pack

Performance Tool W80629 2-1/2″ Brake Rotor Hone 120 Grit Flexible Ball Stones., 1 Pack - 2-1/2 in. Use to score a cross hatch pattern on the surface of brake rotors. Gain lower harmonic vibration, and a quieter braking system. Diameter 120 grit flexible ball stones. Works on automotive and motorcycle brake rotors, and flywheels.

 

Brush Research CH-C Large Chamfer Flex-Hone Silicon Carbide 58 Diameter 180 Grit Pack of 1

Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8″ Diameter, 180 Grit (Pack of 1)

Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8″ Diameter, 180 Grit (Pack of 1) - Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole. Suitable for finishing titanium, inconel, super cvm and nickel based stainless steel alloys. Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts. The flex-hone for chamfer blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation. 0030-0050″ chamfer size range.

 

Brush Research 14353 BRM Flex-Hone Kit Automotive Set with 10 Piece

Brush Research 14353 BRM Flex-Hone Kit, Automotive Set with 10 Piece

Brush Research 14353 BRM Flex-Hone Kit, Automotive Set with 10 Piece - Made in the usa, flex-hones developed and manufactured in america for over 55 years. 10 piece kit features flex-hone sizes 10mm, ½, 5/8″, ¾”, 7/8″, 1″, 1-1/4″, 1-1/2″ 1-3/4″ and 2″. Silicon carbide abrasive globules in 180 grit are self-aligning and self-centering– ideal for mild steel, stainless steel and cast iron. Used for refinishing brake calipers, brake cylinders, lifter bores, and u-joint yokes ideal for bearing and bushing applications as well. Hones have an 8″ overall length with a durable stainless steel stem that can be used in any collet, chuck or similar holding device.

 

4-58 118MM Flex Hone 320 Grit Aluminum Oxide

4-5/8″ (118MM) Flex Hone 320 Grit Aluminum Oxide

4-5/8″ (118MM) Flex Hone 320 Grit Aluminum Oxide - Tool is is labeled as 4625″ diameter but is slightly larger to apply the required wall force for a 4 5/8″ bore. Brand new sealed in package engine cylinder hone is for 4150″ to 4650″ bores. Tool is self centering, tool can be used with a 3/8″ or 1/2″ chuck portable drill or drill press. 320 grit, excellent for reringing jobs or final bore. Perfect for nikasil coated or chrome bores but will work with other engines as well (iron blocks).

 

Brush Research 09247 Rifle Chamber Flex-Hone Silicon Carbide 800 Grit For 556 NATO Pack of 1

Brush Research 09247 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 5.56 NATO (Pack of 1)

Brush Research 09247 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 5.56 NATO (Pack of 1) - For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice. Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle’s chamber. The result achieved with these flex-hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle. To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential. 1-5/8-inches abrasive part.

 

4 101MM Flex Hone 320 Grit Silicon Carbide Commercial Grade

4″ (101MM) Flex Hone 320 Grit Silicon Carbide Commercial Grade

4″ (101MM) Flex Hone 320 Grit Silicon Carbide Commercial Grade - 320 grit, excellent for re-ringing jobs or final bore utilizing performance or moly rings. Tool is labeled as 4000″ diameter but is actually slightly larger to apply the required wall for force honing a 4000″ bore. This brand new sealed in package commercial version engine cylinder hone is for 3825″ to 4055″ bores. Made in usa by the one of the best cylinder hone manufacturers. Tool is self centering and easy to use, hone can be used with a 3/8″ or 1/2″ chuck portable drill or drill press or other.

 

Brush Research 08041 Rifle Chamber Flex-Hone Silicon Carbide 800 Grit For 0308 Rifle Cartridge Pack of 1

Brush Research 08041 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.308 Rifle Cartridge (Pack of 1)

Brush Research 08041 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.308 Rifle Cartridge (Pack of 1) - Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle’s chamber. To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential. For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice. 1-5/8-inches abrasive part. The result achieved with these flex-hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle.

 

Brush Research CH-C Large Chamfer Flex-Hone Silicon Carbide 8mm Diameter 180 Grit Pack of 1

Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 8mm Diameter, 180 Grit (Pack of 1)

Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 8mm Diameter, 180 Grit (Pack of 1) - Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole. Suitable for finishing titanium, inconel, super cvm and nickel based stainless steel alloys. Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts. 0030-0050″ chamfer size range. The flex-hone for chamfer blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.

 

Brush Research 07584 Revolver Chamber Flex-Hone Silicon Carbide 400 Grit For 9mm Pistols Pack of 1

Brush Research 07584 Revolver Chamber Flex-Hone, Silicon Carbide, 400 Grit, For 9mm Pistols (Pack of 1)

Brush Research 07584 Revolver Chamber Flex-Hone, Silicon Carbide, 400 Grit, For 9mm Pistols (Pack of 1) - 9mm type. 1-5/8-inches abrasive surface and a 3-inches overall length. Silicon carbide abrasive grit material. The surface will be more regular, hold oil and lubricants better and have a beautiful finish. Honing your handgun cylinder will result in a smoother, cleaner surface that is free from machining imperfections and less prone to fouling and corrosion.

 

Brush Research FLEX-HONE Cylinder Hone GBD Series Silicon Carbide Abrasive 4 101 mm Diameter 240 Grit Size

Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 4″ (101 mm) Diameter, 240 Grit Size

Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 4″ (101 mm) Diameter, 240 Grit Size - Flex-hone® tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Flexible honing with the flex-hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results. Any type or size of cylinder can benefit from the flex-hone®. The flex-hone® tool was originally created by brush research manufacturing to deglaze cylinder walls in automotive applications. The flex-hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Because of its unique construction, the flex-hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Brush research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the flex-hone tool in 1972. These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on.

 

Brush Research 00056 Chamber Flex-Hone Aluminum Oxide 20 Gauge 800 Grit Pack of 1

Brush Research 00056 Chamber Flex-Hone, Aluminum Oxide, 20 Gauge, 800 Grit (Pack of 1)

Brush Research 00056 Chamber Flex-Hone, Aluminum Oxide, 20 Gauge, 800 Grit (Pack of 1) - The end result is a more polished smoothbore with a beautiful finish. The unique fingers gently smooth the metal, creating a more uniform surface that resists wear, corrosion and reduces fouling. For smoothbores only. The stem wire is covered with a protective shrink tube coating to protect the barrel. Flex-hone tools will improve the look of your shotgun barrel, while making it easier to maintain.

 

1 25mm Flex-Hone Cylinder Hone Tool 120 Grit Silicon Carbide

1″ (25mm) Flex-Hone Cylinder Hone Tool 120 Grit (Silicon Carbide)

1″ (25mm) Flex-Hone Cylinder Hone Tool 120 Grit (Silicon Carbide) - Hone is made in usa by brush research manufacturing. Hone is self centering and can be used with 3/8″ or 1/2″ chuck drill. Flexible cylinder hone made of silicon carbide. The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work). Perfect for bore honing and cylinder refinishing.

 

Brush Research FLEX-HONE Cylinder Hone BC Series Silicon Carbide Abrasive 2-12 64 mm Diameter 320 Grit Size

Brush Research FLEX-HONE Cylinder Hone, BC Series, Silicon Carbide Abrasive, 2-1/2″ (64 mm) Diameter, 320 Grit Size

Brush Research FLEX-HONE Cylinder Hone, BC Series, Silicon Carbide Abrasive, 2-1/2″ (64 mm) Diameter, 320 Grit Size - Flexible honing with the flex-hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. Brush research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the flex-hone tool in 1972. Flex-hone® tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Any type or size of cylinder can benefit from the flex-hone®. The flex-hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. The flex-hone® tool was originally created by brush research manufacturing to deglaze cylinder walls in automotive applications. Because of its unique construction, the flex-hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life.

 

1 58 41mm Flex-Hone Cylinder Hone Tool 180 Grit Silicon Carbide

1 5/8″ (41mm) Flex-Hone Cylinder Hone Tool 180 Grit (Silicon Carbide)

1 5/8″ (41mm) Flex-Hone Cylinder Hone Tool 180 Grit (Silicon Carbide) - Hone is self centering and can be used with 3/8″ or 1/2″ chuck drill. The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work). Flexible cylinder hone made of silicon carbide. Perfect for bore honing and cylinder refinishing. Hone is made in usa by brush research manufacturing.

 

3 12 89mm Flex-Hone Cylinder Hone Tool 120 Grit Silicon Carbide

3 1/2″ (89mm) Flex-Hone Cylinder Hone Tool 120 Grit (Silicon Carbide)

3 1/2″ (89mm) Flex-Hone Cylinder Hone Tool 120 Grit (Silicon Carbide) - Perfect for bore honing and cylinder refinishing. Flexible cylinder hone made of silicon carbide. Hone is made in usa by brush research manufacturing. The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work). Hone is self centering and can be used with 3/8″ or 1/2″ chuck drill.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.