Top 20 Best F593s

 

12-13x7PT UNC Stainless Steel 18-8 Hex Head Cap Screw HHCS INCH ASTM F593 QUANTITY 10 Size 12-13  Length 7  Coarse Thread  Partially Threaded

1/2″-13×7″,(PT) UNC Stainless Steel (18-8) Hex Head Cap Screw (HHCS) (INCH) ASTM F593 (QUANTITY: 10) Size: 1/2″-13 | Length: 7″ | Coarse Thread | Partially Threaded

1/2″-13×7″,(PT) UNC Stainless Steel (18-8) Hex Head Cap Screw (HHCS) (INCH) ASTM F593 (QUANTITY: 10) Size: 1/2″-13 | Length: 7″ | Coarse Thread | Partially Threaded - | 3/4″ (2. Minimum | 3/4″ (2. Some chemical environments may require special corrosion resistant materials and precautions. 25d & longer) & 7/8 through 1 in. Hardness 1/4 through 5/8 in. The only heat treatment normally available on austenitic stainless alloys is annealing, which is done at approximately 1900°f to a dead soft condition and is not normally thermally reversible. 25d and longer 65,000 psi. Diameter rockwell b80, c32. Diameter (3d & longer) 45,000 psi. 25d and longer 100,000, 150,000 psi. Diameter, 2. Diameter, 2. Diameter rockwell b95, c32 | 3/4 through 1 in. Yield strength 1/4 through 5/8 in. 18-8 used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Heat treatment the austenitic alloys develop their strength through work hardening during the fastener manufacturing process, as seen from the hardness properties below. Minimum. Tensile strength 1/4 through 5/8 in. Material 18-8 a cap screw made from one of the following austenitic alloys 303, 303se, 304, xm7, all of which are characterized as having a chromium content of 17-19% and nickel content of 8-10%. 25d & longer) & 7/8 through 1 in. Diameter (3d & longer) 85,000, 140,000 psi.

 

34-10x4PT UNC Stainless Steel 18-8 Hex Head Cap Screw HHCS INCH ASTM F593 QUANTITY 10 Size 34-10  Length 4  Coarse Thread  Partially Threaded

3/4″-10×4″,(PT) UNC Stainless Steel (18-8) Hex Head Cap Screw (HHCS) (INCH) ASTM F593 (QUANTITY: 10) Size: 3/4″-10 | Length: 4″ | Coarse Thread | Partially Threaded

3/4″-10×4″,(PT) UNC Stainless Steel (18-8) Hex Head Cap Screw (HHCS) (INCH) ASTM F593 (QUANTITY: 10) Size: 3/4″-10 | Length: 4″ | Coarse Thread | Partially Threaded - | 3/4″ (2. Minimum | 3/4″ (2. Diameter (3d & longer) 85,000, 140,000 psi. 25d and longer 65,000 psi. Tensile strength 1/4 through 5/8 in. 25d & longer) & 7/8 through 1 in. Diameter, 2. Hardness 1/4 through 5/8 in. Diameter rockwell b80, c32. The only heat treatment normally available on austenitic stainless alloys is annealing, which is done at approximately 1900°f to a dead soft condition and is not normally thermally reversible. 25d and longer 100,000, 150,000 psi. Diameter rockwell b95, c32 | 3/4 through 1 in. Diameter, 2. Material 18-8 a cap screw made from one of the following austenitic alloys 303, 303se, 304, xm7, all of which are characterized as having a chromium content of 17-19% and nickel content of 8-10%. 18-8 used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions. 25d & longer) & 7/8 through 1 in. Minimum. Diameter (3d & longer) 45,000 psi. Yield strength 1/4 through 5/8 in. Heat treatment the austenitic alloys develop their strength through work hardening during the fastener manufacturing process, as seen from the hardness properties below.

 

58-18x3 PT UNF Hex Head Cap Screw HHCS Stainless Steel 18-8 ASTM F593 inch Quantity 75

5/8″-18×3″ (PT) UNF Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 75)

5/8″-18×3″ (PT) UNF Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 75) - Trust the quality of jet fitting hex head cap screw (hhcs), stainless steel (18-8), astm f593, (inch). Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’. Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers.

 

34-10 x 6 Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 Pk 3

3/4″-10 x 6′ Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 Pk 3

3/4″-10 x 6′ Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 Pk 3 - Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. All asmc industrial fasteners are fully traceable and lot-controlled. All asmc industrial fasteners are guaranteed to be of the highest quality. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot.

 

1 14-7x10 PT UNC Hex Head Cap Screw HHCS Stainless Steel 18-8 ASTM F593 inch Quantity 6

1 1/4″-7×10″ (PT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 6)

1 1/4″-7×10″ (PT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 6) - Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers. Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’. Trust the quality of jet fitting hex head cap screw (hhcs), stainless steel (18-8), astm f593, (inch).

 

1-8x6 12 PT UNC Hex Head Cap Screw HHCS Stainless Steel 316 ASTM F593 inch Quantity 20

1″-8×6 1/2″ (PT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (316) ASTM F593 (inch) (Quantity: 20)

1″-8×6 1/2″ (PT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (316) ASTM F593 (inch) (Quantity: 20) - Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers. Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’. Trust the quality of jet fitting hex head cap screw (hhcs), stainless steel (316), astm f593, (inch).

 

38-16x1 34 FT Hex Head Cap Screw Stainless Steel 18-8 ASTM F593 Fully Threaded inch Quantity 350

3/8″-16×1 3/4″ (FT) Hex Head Cap Screw, Stainless Steel (18-8) ASTM F593, Fully Threaded (inch) (Quantity: 350)

3/8″-16×1 3/4″ (FT) Hex Head Cap Screw, Stainless Steel (18-8) ASTM F593, Fully Threaded (inch) (Quantity: 350) - Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. Specially desgined under the head washer face and a chamfered point. All asmc industrial fasteners are fully traceable and lot-controlled. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot.

 

14-20x3 14 PT UNC Hex Head Cap Screw HHCS Stainless Steel 18-8 ASTM F593 inch Quantity 500

1/4″-20×3 1/4″ (PT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 500)

1/4″-20×3 1/4″ (PT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 500) - Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’. Trust the quality of jet fitting hex head cap screw (hhcs), stainless steel (18-8), astm f593, (inch). Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers.

 

12-13x4 FT Hex Head Cap Screw Stainless Steel 18-8 ASTM F593 Fully Threaded inch Quantity 100

1/2″-13×4″ (FT) Hex Head Cap Screw, Stainless Steel (18-8) ASTM F593, Fully Threaded (inch) (Quantity: 100)

1/2″-13×4″ (FT) Hex Head Cap Screw, Stainless Steel (18-8) ASTM F593, Fully Threaded (inch) (Quantity: 100) - Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’. Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers. Trust the quality of jet fitting hex head cap screw, stainless steel (18-8), astm f593, fully threaded, (inch).

 

18-8 Stainless Steel Carriage Bolt Plain Finish Square Neck Round Head Meets ASME B185ASTM F593 2 Length Fully Threaded 516-18 UNC Threads Pack of 10

18-8 Stainless Steel Carriage Bolt, Plain Finish, Square Neck, Round Head, Meets ASME B18.5/ASTM F593, 2″ Length, Fully Threaded, 5/16″-18 UNC Threads (Pack of 10)

18-8 Stainless Steel Carriage Bolt, Plain Finish, Square Neck, Round Head, Meets ASME B18.5/ASTM F593, 2″ Length, Fully Threaded, 5/16″-18 UNC Threads (Pack of 10) - Square neck prevents the bolt from turning once installed, even when a nut is tightened. 18-8 stainless steel provides good corrosion resistance and strength. Meets asme b185 and astm f593 specifications. Round head has a domed shape. Plain surface has no finish or coating.

 

58-18x3 12 PT UNF Hex Head Cap Screw HHCS Stainless Steel 18-8 ASTM F593 inch Quantity 75

5/8″-18×3 1/2″ (PT) UNF Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 75)

5/8″-18×3 1/2″ (PT) UNF Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 75) - Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers. Trust the quality of jet fitting hex head cap screw (hhcs), stainless steel (18-8), astm f593, (inch). Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’.

 

12-13x5PT UNC Stainless Steel 316 Hex Head Cap Screw ASTM F593 INCH QUANTITY 15 Size 12-13  Length 5  Coarse Thread  Partially Threaded

1/2″-13×5″,(PT) UNC Stainless Steel (316) Hex Head Cap Screw, ASTM F593 (INCH) (QUANTITY: 15) Size: 1/2″-13 | Length: 5″ | Coarse Thread | Partially Threaded

1/2″-13×5″,(PT) UNC Stainless Steel (316) Hex Head Cap Screw, ASTM F593 (INCH) (QUANTITY: 15) Size: 1/2″-13 | Length: 5″ | Coarse Thread | Partially Threaded - Hardness 1/4 through 5/8 in. 25d & longer) & 7/8 through 1 in. Minimum. Diameter rockwell b95, c32 | 3/4 through 1 in. Diameter rockwell b80, c32. Heat treatment the austenitic alloys develop their strength through work hardening during the fastener manufacturing process, as seen from the hardness properties below. 25d & longer) & 7/8 through 1 in. | 3/4″ (2. Diameter (3d & longer) 45,000 psi. Minimum | 3/4″ (2. Material 316 a cap screw made from 316 stainless steel, an austenitic alloy which differs from 18-8 by its molybdenum content (2-3%) and a higher nickel content (10-14%). The only heat treatment normally available on austenitic stainless alloys is annealing, which is done at approximately 1900°f to a dead soft condition and is not normally thermally reversible. Diameter (3d & longer) 85,000, 140,000 psi. Yield strength 1/4 through 5/8 in. 25d and longer 100,000, 150,000 psi. Tensile strength 1/4 through 5/8 in. 25d and longer 65,000 psi. Diameter, 2. 316 the molybdenum content gives this type of stainless even greater corrosion resistance than 18-8 as well as superior strength at high temperatures. Diameter, 2.

 

58-11x2 FT UNC Hex Head Cap Screw HHCS Stainless Steel 316 ASTM F593 inch Quantity 100

5/8″-11×2″ (FT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (316) ASTM F593 (inch) (Quantity: 100)

5/8″-11×2″ (FT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (316) ASTM F593 (inch) (Quantity: 100) - Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers. Trust the quality of jet fitting hex head cap screw (hhcs), stainless steel (316), astm f593, (inch). Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’.

 

12-13x6 PT UNC Hex Head Cap Screw HHCS Stainless Steel 18-8 ASTM F593 inch Quantity 50

1/2″-13×6″ (PT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 50)

1/2″-13×6″ (PT) UNC Hex Head Cap Screw (HHCS) Stainless Steel (18-8) ASTM F593 (inch) (Quantity: 50) - Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers. Trust the quality of jet fitting hex head cap screw (hhcs), stainless steel (18-8), astm f593, (inch). Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’.

 

75pcs 12-13x5PT UNC Hex Head Cap Screw HHCS Stainless Steel 316 ASTM F593 inch Size 12-13 Length 5 Coarse Thread UNC Partially Threaded

(75pcs) 1/2″-13×5″,(PT) UNC Hex Head Cap Screw (HHCS), Stainless Steel (316), ASTM F593, (inch), Size: 1/2″-13, Length: 5″, Coarse Thread (UNC), Partially Threaded,

(75pcs) 1/2″-13×5″,(PT) UNC Hex Head Cap Screw (HHCS), Stainless Steel (316), ASTM F593, (inch), Size: 1/2″-13, Length: 5″, Coarse Thread (UNC), Partially Threaded, - Manufactured to asme b1821 dimensions. Hex cap screws (hex head bolts). Stainless steel (316) hex head cap screw, astm f593 (inch).

 

316 Stainless Steel Hex Bolt Plain Finish Hex Head External Hex Drive Meets ASME B1821ASTM F593 1 Length Fully Threaded 38-24 Threads Pack of 10

316 Stainless Steel Hex Bolt, Plain Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/ASTM F593, 1″ Length, Fully Threaded, 3/8″-24 Threads (Pack of 10)

316 Stainless Steel Hex Bolt, Plain Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/ASTM F593, 1″ Length, Fully Threaded, 3/8″-24 Threads (Pack of 10) - 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel. Meets asme b1821 and astm f593 specifications. External hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Plain surface has no finish or coating.

 

516-18 x 3 Coarse Thread ASTM F593 All Thread Rod Stainless Steel 304 Pk 20

5/16″-18 x 3′ Coarse Thread ASTM F593 All Thread Rod Stainless Steel 304 Pk 20

5/16″-18 x 3′ Coarse Thread ASTM F593 All Thread Rod Stainless Steel 304 Pk 20 - All asmc industrial fasteners are guaranteed to be of the highest quality. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot. All asmc industrial fasteners are fully traceable and lot-controlled. Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.

 

38-16 x 3 Coarse Thread ASTM F593 All Thread Rod Stainless Steel 304 Pk 20

3/8″-16 x 3′ Coarse Thread ASTM F593 All Thread Rod Stainless Steel 304 Pk 20

3/8″-16 x 3′ Coarse Thread ASTM F593 All Thread Rod Stainless Steel 304 Pk 20 - All asmc industrial fasteners are fully traceable and lot-controlled. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot. Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. All asmc industrial fasteners are guaranteed to be of the highest quality.

 

12-13x8PT UNC Stainless Steel 316 Hex Head Cap Screw ASTM F593 INCH QUANTITY 10 Size 12-13  Length 8  Coarse Thread  Partially Threaded

1/2″-13×8″,(PT) UNC Stainless Steel (316) Hex Head Cap Screw, ASTM F593 (INCH) (QUANTITY: 10) Size: 1/2″-13 | Length: 8″ | Coarse Thread | Partially Threaded

1/2″-13×8″,(PT) UNC Stainless Steel (316) Hex Head Cap Screw, ASTM F593 (INCH) (QUANTITY: 10) Size: 1/2″-13 | Length: 8″ | Coarse Thread | Partially Threaded - 25d and longer 100,000, 150,000 psi. Diameter (3d & longer) 85,000, 140,000 psi. 25d & longer) & 7/8 through 1 in. 25d and longer 65,000 psi. | 3/4″ (2. Diameter (3d & longer) 45,000 psi. Yield strength 1/4 through 5/8 in. Tensile strength 1/4 through 5/8 in. Hardness 1/4 through 5/8 in. Heat treatment the austenitic alloys develop their strength through work hardening during the fastener manufacturing process, as seen from the hardness properties below. Diameter, 2. Diameter rockwell b80, c32. 316 the molybdenum content gives this type of stainless even greater corrosion resistance than 18-8 as well as superior strength at high temperatures. The only heat treatment normally available on austenitic stainless alloys is annealing, which is done at approximately 1900°f to a dead soft condition and is not normally thermally reversible. Minimum. 25d & longer) & 7/8 through 1 in. Minimum | 3/4″ (2. Diameter, 2. Material 316 a cap screw made from 316 stainless steel, an austenitic alloy which differs from 18-8 by its molybdenum content (2-3%) and a higher nickel content (10-14%). Diameter rockwell b95, c32 | 3/4 through 1 in.

 

12-13 x 12 Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 Pk 6

1/2″-13 x 12′ Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 Pk 6

1/2″-13 x 12′ Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 Pk 6 - All asmc industrial fasteners are guaranteed to be of the highest quality. All asmc industrial fasteners are fully traceable and lot-controlled. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot. Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.