Top 20 Belt Pitches

 

Jason Industrial 110XL031  Extra Light Standard Timing Belt Chloroprene 15 Pitch 11 Pitch Length 031 Wide

Jason Industrial 110XL031 Extra Light Standard Timing Belt, Chloroprene, 1/5″ Pitch, 11″ Pitch Length, 0.31″ Wide

Jason Industrial 110XL031 Extra Light Standard Timing Belt, Chloroprene, 1/5″ Pitch, 11″ Pitch Length, 0.31″ Wide - Trapezoidal tooth profile (oil, heat and abrasion resistant). Standard timing belts, xl, l, h, xh, xxh. Stock timing belts are listed below. They have fiberglass tension members, chloroprene body with nylon covered teeth, all bonded together for maximum strength. Jason timing belts are specified by belt length in inches times 10, belt pitch code and a three-digit belt width code, which is the decimal inch-width multiplied by 100, example 240l075.

 

Jason Industrial 210L025 Light Standard Timing Belt Chloroprene 38 Pitch 21 Length 025 Wide

Jason Industrial 210L025 Light Standard Timing Belt, Chloroprene, 3/8″ Pitch, 21″ Length, 0.25″ Wide

Jason Industrial 210L025 Light Standard Timing Belt, Chloroprene, 3/8″ Pitch, 21″ Length, 0.25″ Wide - Trapezoidal tooth profile (oil, heat and abrasion resistant). Jason timing belts are specified by belt length in inches times 10, belt pitch code and a three-digit belt width code, which is the decimal inch-width multiplied by 100, example 240l075. Standard timing belts, xl, l, h, xh, xxh. They have fiberglass tension members, chloroprene body with nylon covered teeth, all bonded together for maximum strength. Stock timing belts are listed below.

 

Jason Industrial 25T101500 T-10 Metric Pitch Timing Belts 1500 mm Pitch Length 150 Teeth 25 mm Wide

Jason Industrial 25T10/1500 T-10 Metric Pitch Timing Belts, 1500 mm Pitch Length, 150 Teeth, 25 mm Wide

Jason Industrial 25T10/1500 T-10 Metric Pitch Timing Belts, 1500 mm Pitch Length, 150 Teeth, 25 mm Wide - Maximum width is 300 mm. Oil, heat and abrasion-resistant. Urethane steel cable construction. They are especially useful for chemically resistant operating requirements and for clean environments. For example 20t10/900. For non-stock widths, jason can cut specified widths from our supply of metric timing belt sleeves on special order. Metric timing belts are specified by belt width in millimeters, belt pitch, letter-number and pitch length in millimeters. They have steel tension members bonded to a urethane body. Metric timing belts are available in 5 mm and 10 mm pitch.

 

Jason Industrial 106XL031 Pitch Standard Timing Belt 106 Length15 XL Tooth Pitch 031 Width 53 Teeth

Jason Industrial 106XL031 Pitch Standard Timing Belt, 10.6″ Length1/5″ XL Tooth Pitch, 0.31″ Width, 53 Teeth

Jason Industrial 106XL031 Pitch Standard Timing Belt, 10.6″ Length1/5″ XL Tooth Pitch, 0.31″ Width, 53 Teeth - They have fiberglass tension members, chloroprene body with nylon covered teeth, all bonded together for maximum strength. Stock timing belts are listed below. Trapezoidal tooth profile (oil, heat and abrasion resistant). Standard timing belts, xl, l, h, xh, xxh. Jason timing belts are specified by belt length in inches times 10, belt pitch code and a three-digit belt width code,which is the decimal inch-width multiplied by 100, example 240l075.

 

Jason Industrial 039-270L100 Light Standard Timing Belt 38 Pitch 27 Length 100 Wide

Jason Industrial 039-270L100 Light Standard Timing Belt, 3/8″ Pitch, 27″ Length, 1.00″ Wide

Jason Industrial 039-270L100 Light Standard Timing Belt, 3/8″ Pitch, 27″ Length, 1.00″ Wide - Jason timing belts are specified by belt length in inches times 10, belt pitch code and a three-digit belt width code, which is the decimal inch-width multiplied by 100, example 240l075. Stock timing belts are listed below. They have fiberglass tension members, chloroprene body with nylon covered teeth, all bonded together for maximum strength. Standard timing belts, xl, l, h, xh, xxh. Trapezoidal tooth profile (oil, heat and abrasion resistant).

 

DealMux HTD496-8M 10mm Width 8mm Pitch Synchronous Timing Belt for CNC Machine

DealMux HTD496-8M 10mm Width 8mm Pitch Synchronous Timing Belt for CNC Machine

DealMux HTD496-8M 10mm Width 8mm Pitch Synchronous Timing Belt for CNC Machine - Belt width 10mm / 04’belt girth 496mm/ 16ft/ 195’total height 6mm/024′. Product name timing beltmodel htd496-8mnumber of teeth 62. Net weight 35gpackage content 1 x timing belt. Pitch 8mm / 031’tooth height 338mm / 013’tooth width 515mm / 02′. Belt material neoprene (synthetic rubber)core wire material glass fibercolor black.

 

Jason Industrial 120XL031 Pitch Standard Timing Belt15 XL Tooth Pitch 031 Wide 12 Tooth Profile Length 60 Teeth

Jason Industrial 120XL031 Pitch Standard Timing Belt,1/5″ XL Tooth Pitch, 0.31″ Wide, 12″ Tooth Profile Length, 60 Teeth

Jason Industrial 120XL031 Pitch Standard Timing Belt,1/5″ XL Tooth Pitch, 0.31″ Wide, 12″ Tooth Profile Length, 60 Teeth - Stock timing belts are listed below. Jason timing belts are specified by belt length in inches times 10, belt pitch code and a three-digit belt width code,which is the decimal inch-width multiplied by 100, example 240l075. They have fiberglass tension members, chloroprene body with nylon covered teeth, all bonded together for maximum strength. Trapezoidal tooth profile (oil, heat and abrasion resistant). Standard timing belts, xl, l, h, xh, xxh.

 

uxcell 2m Long XL Type 508mm Pitch 10mm Width Machine Timing Belt White

uxcell 2m Long XL Type 5.08mm Pitch 10mm Width Machine Timing Belt White

uxcell 2m Long XL Type 5.08mm Pitch 10mm Width Machine Timing Belt White - Product name timing belttype xl. Package content 1 x timing belt. Color whiteweight 49g. Belt girth 2m / 66ftmaterial pu. Pitch 508mmbelt width 10mm / 039″.

 

Jason Industrial 9AT5750 AT-5 Metric Pitch Timing Belts Polyurethane 9 mm Wide 750 mm Pitch Length 150 Teeth

Jason Industrial 9AT5/750 AT-5 Metric Pitch Timing Belts, Polyurethane, 9 mm Wide, 750 mm Pitch Length, 150 Teeth

Jason Industrial 9AT5/750 AT-5 Metric Pitch Timing Belts, Polyurethane, 9 mm Wide, 750 mm Pitch Length, 150 Teeth - For example 20t10/900. Urethane steel cable construction. Maximum width is 300 mm. Metric timing belts are available in 5 mm and 10 mm pitch. Metric timing belts are specified by belt width in millimeters, belt pitch, letter-number and pitch length in millimeters. They are especially useful for chemically resistant operating requirements and for clean environments. They have steel tension members bonded to a urethane body. For non-stock widths, jason can cut specified widths from our supply of metric timing belt sleeves on special order. Oil, heat and abrasion-resistant.

 

Jason Industrial 4T25265 T-25 Metric Pitch Timing Belts Polyurethane 4 mm Wide 265 mm Pitch Length 106 Teeth

Jason Industrial 4T2.5/265 T-2.5 Metric Pitch Timing Belts, Polyurethane, 4 mm Wide, 265 mm Pitch Length, 106 Teeth

Jason Industrial 4T2.5/265 T-2.5 Metric Pitch Timing Belts, Polyurethane, 4 mm Wide, 265 mm Pitch Length, 106 Teeth - Urethane steel cable construction. They are especially useful for chemically resistant operating requirements and for clean environments. For example 20t10/900. Oil, heat and abrasion-resistant. Metric timing belts are specified by belt width in millimeters, belt pitch, letter-number and pitch length in millimeters. For non-stock widths, jason can cut specified widths from our supply of metric timing belt sleeves on special order. Metric timing belts are available in 5 mm and 10 mm pitch. They have steel tension members bonded to a urethane body. Maximum width is 300 mm.

 

Jason Industrial 170XL050 Pitch Standard Timing Belt  15 XL 17 Length 85 Teeth

Jason Industrial 170XL050 Pitch Standard Timing Belt, 1/5″ XL, 17″ Length, 85 Teeth

Jason Industrial 170XL050 Pitch Standard Timing Belt, 1/5″ XL, 17″ Length, 85 Teeth - Standard timing belts, xl, l, h, xh, xxh. They have fiberglass tension members, chloroprene body with nylon covered teeth, all bonded together for maximum strength. Trapezoidal tooth profile (oil, heat and abrasion resistant). Stock timing belts are listed below. Jason timing belts are specified by belt length in inches times 10, belt pitch code and a three-digit belt width code,which is the decimal inch-width multiplied by 100, example 240l075.

 

Jason Industrial 1040-8M-85T Chloroprene Tiger High Torque Synchronous Belt 1040 mm Pitch Length 85 mm Wide

Jason Industrial 1040-8M-85T Chloroprene Tiger High Torque Synchronous Belt, 1040 mm Pitch Length, 85 mm Wide

Jason Industrial 1040-8M-85T Chloroprene Tiger High Torque Synchronous Belt, 1040 mm Pitch Length, 85 mm Wide - Heavy nylon tooth cover, smooth operation, high power capacity, longer life. Fiberglass tensile cord, excellent dimensional stability and high power capacity. Htb tooth profile, uses upgraded industrial pulleys with either htd or rpp profile. Chloroprene rubber compound with aramid reinforcement, superior power capacity, oil and heat resistance.

 

Jason Industrial 6T5545 T-5 Metric Pitch Timing Belts Polyurethane 6 mm Wide 545 mm Pitch Length 109 Teeth

Jason Industrial 6T5/545 T-5 Metric Pitch Timing Belts, Polyurethane, 6 mm Wide, 545 mm Pitch Length, 109 Teeth

Jason Industrial 6T5/545 T-5 Metric Pitch Timing Belts, Polyurethane, 6 mm Wide, 545 mm Pitch Length, 109 Teeth - They are especially useful for chemically resistant operating requirements and for clean environments. Maximum width is 300 mm. Urethane steel cable construction. Oil, heat and abrasion-resistant. They have steel tension members bonded to a urethane body. For example 20t10/900. Metric timing belts are available in 5 mm and 10 mm pitch. For non-stock widths, jason can cut specified widths from our supply of metric timing belt sleeves on special order. Metric timing belts are specified by belt width in millimeters, belt pitch, letter-number and pitch length in millimeters.

 

BEMONOC Pack of 10pcs 2GT-520-6 GT2 Timing Belt Round Rubber Closed Loop L520 Width 6mm Belt Pitch 2mm Teeth 260 for Motor Belt

BEMONOC Pack of 10pcs 2GT-520-6 GT2 Timing Belt Round Rubber Closed Loop L=520 Width 6mm Belt Pitch 2mm Teeth 260 for Motor Belt

BEMONOC Pack of 10pcs 2GT-520-6 GT2 Timing Belt Round Rubber Closed Loop L=520 Width 6mm Belt Pitch 2mm Teeth 260 for Motor Belt - Temperature range -34°c to +85°c (-30°f to +185°f). 2gt system is an extension of the htd system with greater load carrying capacity. Breaking strength 86 n per 1 mm (62 lbs per 1/8″) belt width. Circular arc tooth profile tooth space is small, suitable for straight line driving. Working tension 111 n for 254 mm belt (25 lbs for 1″belt).

 

Jason Industrial 4T25780 T-25 Metric Pitch Timing Belts Polyurethane 4 mm Wide 780 mm Pitch Length 312 Teeth

Jason Industrial 4T2.5/780 T-2.5 Metric Pitch Timing Belts, Polyurethane, 4 mm Wide, 780 mm Pitch Length, 312 Teeth

Jason Industrial 4T2.5/780 T-2.5 Metric Pitch Timing Belts, Polyurethane, 4 mm Wide, 780 mm Pitch Length, 312 Teeth - Urethane steel cable construction. They are especially useful for chemically resistant operating requirements and for clean environments. For example 20t10/900. For non-stock widths, jason can cut specified widths from our supply of metric timing belt sleeves on special order. Metric timing belts are specified by belt width in millimeters, belt pitch, letter-number and pitch length in millimeters. They have steel tension members bonded to a urethane body. Metric timing belts are available in 5 mm and 10 mm pitch. Oil, heat and abrasion-resistant. Maximum width is 300 mm.

 

Jason Industrial 16T5260 T-5 Metric Pitch Timing Belts Polyurethane 16 mm Wide 260 mm Pitch Length 52 Teeth

Jason Industrial 16T5/260 T-5 Metric Pitch Timing Belts, Polyurethane, 16 mm Wide, 260 mm Pitch Length, 52 Teeth

Jason Industrial 16T5/260 T-5 Metric Pitch Timing Belts, Polyurethane, 16 mm Wide, 260 mm Pitch Length, 52 Teeth - For non-stock widths, jason can cut specified widths from our supply of metric timing belt sleeves on special order. They have steel tension members bonded to a urethane body. For example 20t10/900. Metric timing belts are specified by belt width in millimeters, belt pitch, letter-number and pitch length in millimeters. They are especially useful for chemically resistant operating requirements and for clean environments. Oil, heat and abrasion-resistant. Metric timing belts are available in 5 mm and 10 mm pitch. Maximum width is 300 mm. Urethane steel cable construction.

 

HICTOP 2 Meters GT2 2mm Pitch 6mm Wide Timing Belt Rubber Opening Belt for RepRap 3D Printer Prusa I3 MendelMax

HICTOP 2 Meters GT2 2mm Pitch 6mm Wide Timing Belt Rubber Opening Belt for RepRap 3D Printer Prusa I3 MendelMax

HICTOP 2 Meters GT2 2mm Pitch 6mm Wide Timing Belt Rubber Opening Belt for RepRap 3D Printer Prusa I3 MendelMax - Improve your print quality with high quality belts. 6mm wide. 2m gt2 timing belt. 2 meters rubber opening belt for 3d printer (reprap , prusa i3 , mendelmax). 2mm pitch.

 

uxcell 146XL 73 Teeth 10mm Width 508mm Pitch Stepper Motor Rubber Timing Belt Black

uxcell® 146XL 73 Teeth 10mm Width 5.08mm Pitch Stepper Motor Rubber Timing Belt Black

uxcell® 146XL 73 Teeth 10mm Width 5.08mm Pitch Stepper Motor Rubber Timing Belt Black - Teeth height 127mm/005″ belt thickness 23mm/009″. Pitch 508mm / 02″ circumference 37084mm belt width 10mm / 04″. Country of manufacture china material rubber net weight 9g. Teeth quantity 73 color black shape closed loop. Package content 1 x timing belt model 146xl product name timing belt.

 

Jason Industrial 255H100 Heavy H Standard Timing Belt Chloroprene 12 Pitch 255 Length 0100 Wide

Jason Industrial 255H100 Heavy “H” Standard Timing Belt, Chloroprene, 1/2″ Pitch, 25.5″ Length, 0.100″ Wide

Jason Industrial 255H100 Heavy “H” Standard Timing Belt, Chloroprene, 1/2″ Pitch, 25.5″ Length, 0.100″ Wide - Trapezoidal tooth profile (oil, heat and abrasion resistant). Stock timing belts are listed below. Jason timing belts are specified by belt length in inches times 10, belt pitch code and a three-digit belt width code,which is the decimal inch-width multiplied by 100, example 240l075. Standard timing belts, xl, l, h, xh, xxh. They have fiberglass tension members, chloroprene body with nylon covered teeth, all bonded together for maximum strength.

 

Jason Industrial 106XL037 Pitch Standard Timing Belt 15 XL Pitch 516 Width 53 Teeth

Jason Industrial 106XL037 Pitch Standard Timing Belt, 1/5″ XL Pitch, 5/16″ Width, 53 Teeth

Jason Industrial 106XL037 Pitch Standard Timing Belt, 1/5″ XL Pitch, 5/16″ Width, 53 Teeth - Stock timing belts are listed below. Trapezoidal tooth profile (oil, heat and abrasion resistant). Standard timing belts, xl, l, h, xh, xxh. They have fiberglass tension members, chloroprene body with nylon covered teeth, all bonded together for maximum strength. Jason timing belts are specified by belt length in inches times 10, belt pitch code and a three-digit belt width code,which is the decimal inch-width multiplied by 100, example 240l075.