Top 16 Best Valve Valves

 

Buyers Products HRV10018 In-Line Relief Valve ValveInline Relief1In Npt30 Gpm

Buyers Products HRV10018 In-Line Relief Valve (Valve,Inline Relief,1In Npt,30 Gpm)

Buyers Products HRV10018 In-Line Relief Valve (Valve,Inline Relief,1In Npt,30 Gpm) - Buyers products in-line relief valves have a range of 1501 to 3000 psi. Each size is set at a different psi. Available in both sae & npt ports.

 

Stans-No Tubes 35mm Presta Universal Valve Stem Carded Pair for Mountain

Stans-No Tubes 35mm Presta Universal Valve Stem (Carded Pair for Mountain)

Stans-No Tubes 35mm Presta Universal Valve Stem (Carded Pair for Mountain) - Fits stan’s notubes ztr rims &wheels. Fits wtb tcs rims & wheels. Fits ust wheels including crank brothers, fulcrum, mavic, shimano. Fits sun-ringle wheels featuring notubes bst. Fits bontrager tubeless ready rims & wheels with bontrager’s tubeless ready rimstrip.

 

15 PVC Quiet Union Check Valve

1.5″ PVC Quiet Union Check Valve

1.5″ PVC Quiet Union Check Valve - -Spring loaded flapper helps to eliminate water hammer. -prevents fluid from returning to pit once pumped out through pump discharge. 5″ pvc quiet union check valve. -Dimensions 12″ h x 8″ w x 11″ d. -Solvent weld ends allows for quick installation and removal. -Designed for vertical or horizontal installation. 30-0040 features -1.

 

Hunter PGV101-MM 4 Zone Dura Manifold Valve Kit with Flow Control - Slip PGV101G 4 Zone

Hunter PGV101-MM 4 Zone Dura Manifold Valve Kit with Flow Control – Slip PGV101G (4 Zone)

Hunter PGV101-MM 4 Zone Dura Manifold Valve Kit with Flow Control – Slip PGV101G (4 Zone) - These are ready-to-install kits that take the hassle out of specifying, configuring and installing quality valve systems. Our manifold kit comes with 4 valves manifold with a slip adaptor. These hunter standard manifold systems come with the reliable hunter pgv101-mm valves with flow control. Dura manifolds and fittings are manufactured from schedule 40 construction that is durable with o-ring fittings. O-ring seals are for an easy and tool-less installation. The inlet to the manifold and the outlet of each valve contains an adaptor (slip), which is used to provide a connection into and out of the manifold for 1 inch pvc piping. Entire valves can be easily replaced without digging up the valve pit and cutting into the manifold.

 

Pack of 10 CPR Rescue Mask Training Valves Ever Ready First Aid- Individually Wrapped

Pack of 10 CPR Rescue Mask Training Valves Ever Ready First Aid- Individually Wrapped

Pack of 10 CPR Rescue Mask Training Valves Ever Ready First Aid- Individually Wrapped - Packaged as 10 valves per box, they do not include a rescue mask. This training valve will fit on adult, child, and infant rescue masks. The valve is 2 3/8″ in height and has a fitting with an outside diameter of 7/8″ with an inside diameter of 5/8″. Our training valves features an integral air filter that obstructs the flow of contaminants. Always remember to replace the mask’s original valve and filter assembly after training. Maximize training dollars when teaching with rescue masks by using affordable, single use training valves rather than more expensive replacement valves.

 

Valterra Black 1-12 T1001VP Bladex Waste Valve with Plastic Handle-1-12

Valterra Black 1-1/2″ T1001VP Bladex Waste Valve with Plastic Handle-1-1/2

Valterra Black 1-1/2″ T1001VP Bladex Waste Valve with Plastic Handle-1-1/2 - Valterra’s bladex waste valves fit grentec, bladex, valterra, bristol, and anonda valves and include all necessary seals, nuts and bolts. Since 1981, valterra products, llc, has been a leading supplier of brand name product lines to the rv, pool & spa, and plumbing industries.

 

Homewerks VBV-P40-E5B Ball Valve PVC Schedule 40 Solvent x Solvent 1-Inch

Homewerks VBV-P40-E5B Ball Valve, PVC Schedule 40, Solvent x Solvent, 1-Inch

Homewerks VBV-P40-E5B Ball Valve, PVC Schedule 40, Solvent x Solvent, 1-Inch - Fits both schedule 40 and 80 pipe. Meets ansi / nsf 14 for plastic piping system components. 150 psi at 73 degrees f. Epdm seat seals and o-rings. Slip ends comply with astm d2466.

 

Motorized Ball Valve- 34 Brass Electrical Ball Valve with Standard Port 9-24V ACDC and 3 Wire Setup by US Solid

Motorized Ball Valve- 3/4″ Brass Electrical Ball Valve with Standard Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid …

Motorized Ball Valve- 3/4″ Brass Electrical Ball Valve with Standard Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid … - Alternative to solenoid valves- automatically cuts off power once fully open or fully closed this reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time. Npt threading- 3/4″ quality brass thread, manufactured and measured according to national pipe thread standards this electrical ball valve is standard port, meaning the bore in the ball is a little less than 3/4″ perfect for home automation projects. Safe and reliable- made of durable brass, this valve is safe and reliable the estimated life expectancy of 80,000 to 100,000 cycles means it is built to last. 3 wire, 2 point control setup- simple three wire connection, with two points of control no energy expended once in position. 9v-24v ac/dc- works effectively over entire voltage range will open or close valve in 3-5 seconds no power expended once fully open or fully closed.

 

EZ-Fluid 34 Pex Brass Ball Valve Full Port Water Stop Shut OffLead FreePex Fittings on Both End for Pex TubingBarb Crimp Ring TypeQuarter Turn10-Packs

EZ-Fluid 3/4″ Pex Brass Ball Valve Full Port Water Stop Shut Off,Lead Free,Pex Fittings on Both End for Pex Tubing,Barb Crimp Ring Type,Quarter Turn(10-Packs)

EZ-Fluid 3/4″ Pex Brass Ball Valve Full Port Water Stop Shut Off,Lead Free,Pex Fittings on Both End for Pex Tubing,Barb Crimp Ring Type,Quarter Turn(10-Packs) - Pack 10 pcs 3/4″ pex lead free brass water cut off ball valve. Size 3/4″pex max pressure (psig)150 max temperature 200°f. Heavy duty forged brass valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas. 3/4″ pex quarter turn full port brass stop repair water shut off ball valve lead free barb crimp ring type astm standard f1807. Fitting system compatibilitycrimp/clamp,3/4″ pex fittings on both end.

 

DERNORD Ball Valve Stainless Steel 304 12 NPT Heavy Duty for Water Oil and Gas with Blue Locking Handles Pack of 2

DERNORD Ball Valve Stainless Steel 304 1/2″ NPT Heavy Duty for Water, Oil, and Gas with Blue Locking Handles (Pack of 2)

DERNORD Ball Valve Stainless Steel 304 1/2″ NPT Heavy Duty for Water, Oil, and Gas with Blue Locking Handles (Pack of 2) - Serviceable valve, can be taken apart via threads, female npt ports. Nominal working pressure1000 wogmax 1000 psi for water, oil, gas. Body & ball type304 stainless steeltemp range-60 f to 450 f. Fluid temp range -20°f to 410°f. Handleheavy duty handle with blue vinly insulation.

 

Honeywell V8043E1012 34 Sweat Zone Valve Connection  18 Leads

Honeywell V8043E1012 3/4″ Sweat Zone Valve (Connection = 18″ Leads)

Honeywell V8043E1012 3/4″ Sweat Zone Valve (Connection = 18″ Leads) - 2 wire thermostat control, with end switch. Compact construction for easy installation. May be installed without disassembling the valvemanual opener (on all models, except straight-through, normally open valves) for valve operation on power failure valve returns to automatic position when power is restored. Compact construction for easy installationactuator motor may be replaced without removing the valve body or draining the system. Actuator motor can be replaced without removing the valve body or draining the system. Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system.

 

SharkBite 22187-0000LFA Ball Valve Water Valve Shut Off Female FNPT Push-to-Connect PEX Copper CPVC PE-RT HDPE 1 Inch x 1 Inch FNTP

SharkBite 22187-0000LFA Ball Valve, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT, HDPE, 1 Inch x 1 Inch FNTP

SharkBite 22187-0000LFA Ball Valve, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT, HDPE, 1 Inch x 1 Inch FNTP - Performance sharkbite shutoff valves are are heavy duty and certified to sustain a pressure of 200 psi and 200 degrees fahrenheit. Installs in seconds requires no special tools, no soldering, no crimping or glue just push to create a watertight seal. Quality only sharkbite’s quality and performance is field-proven. Copper, pex, cpvc, pe-rt brass sharkbite ball valve plumbing fittings fit copper, plastic pex tubing, cpvc and pe-rt pipe and connects them in any combination. Preferred by the pro all sharkbite fittings meet the same standards for commercial and residential plumbing applications.

 

Irritrol 205TF 1 Glove Valve National Pipe Thread WFlow Control

Irritrol 205TF 1″ Glove Valve, National Pipe Thread W/Flow Control

Irritrol 205TF 1″ Glove Valve, National Pipe Thread W/Flow Control - Safety, t-handle for manual on/off control, easy operation santoprene seats and stem packing reduce the risk of leakage. Astm 3/4” ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste applications, aquaculture, and other applications. Socket & 150 psi, socket connecting to two pipes going in the same direction maximum pressure rating of 150 psi at 73°f. 1″ npt female pipe thread. Pvc material, pvc for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project for the easy installation.

 

DERNORD Sanitary Sample Valve 15 Tri Clamp Ferrule OD 505MM with Elliptic Handle

DERNORD Sanitary Sample Valve 1.5″ Tri Clamp Ferrule OD 50.5MM with Elliptic Handle

DERNORD Sanitary Sample Valve 1.5″ Tri Clamp Ferrule OD 50.5MM with Elliptic Handle - Stainless steel flow control equipment for the food, beverage, dairy, cosmetics, pharmaceutical, biotechnology, and electronics processing industries. Outlet connection 10mm hose barb. Body material stainless steel 304. Combined with 15 inch tri clamp silicone gasket (not included), available with clamp ends. Connection 15″ tri clamp ferrule od 505mm.

 

Jobe Valves Rojo High Flow Low Pressure Valve 34 YellowBlack

Jobe Valves Rojo High Flow Low Pressure Valve, 3/4″, Yellow/Black

Jobe Valves Rojo High Flow Low Pressure Valve, 3/4″, Yellow/Black - This model is the hf (higher flow) model, other models are available with varying flow and pressure rating. Flow rates are restricted (maximum 1-8 gpm). Great for gravity systems as it requires no pressure (rating 0-75 psi), yet works good with pressure. It is a good choice where its low flow is sufficient and its compact, non-corrosive construction is beneficial. Valve has longer threads and backing nut, so it can be easily installed through a tank wall as it has its own back nut and washer. The rojo float valve is a float operated water valve for automated filling of water tanks. It is a simple, mechanical valve. The rojo can be mounted above or below water. Comes complete with float, 3″ arm, and valve.

 

SuperWhole 1 NPT Female SS 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000

SuperWhole 1″ NPT Female SS 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000

SuperWhole 1″ NPT Female SS 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000 - Package included 1 piece x 1″ ball valve. 1000 wogmax 1000 psi for water, oil, gasfluid mediumfor use with liquids and gases. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications the valve is fitted with ptfe seals for maximizing corrosion resistance and lifespan of the ball valve. Body & ball type316 stainless steeltemp range-60f to 450fdimension 1″. Handleheavy duty handle with blue vinly insulation.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.