Top 16 Best O Rings

 

014 Buna-N O-Ring 70A Durometer Black 12 ID 58 OD 116 Width Pack of 100

014 Buna-N O-Ring, 70A Durometer, Black, 1/2″ ID, 5/8″ OD, 1/16″ Width (Pack of 100)

014 Buna-N O-Ring, 70A Durometer, Black, 1/2″ ID, 5/8″ OD, 1/16″ Width (Pack of 100) - Can be used across a wide temperature range from -30 degrees f (-34 degrees c) to 250 degrees f (121 degrees c). Durometer (hardness) of 70a for resistance to penetration. Meets standards defined by aerospace standard as568a. Made of buna-nitrile (also called buna-n) for use with a variety of fluids and hydrocarbons. Round in cross-section to provide a seal between cylindrical overlapping surfaces.

 

014 Silicone O-Ring 70A Durometer Red 12 ID 58 OD 116 Width Pack of 100

014 Silicone O-Ring, 70A Durometer, Red, 1/2″ ID, 5/8″ OD, 1/16″ Width (Pack of 100)

014 Silicone O-Ring, 70A Durometer, Red, 1/2″ ID, 5/8″ OD, 1/16″ Width (Pack of 100) - Durometer (hardness) of 70a for resistance to penetration. Meets standards defined by aerospace standard as568a. Made of silicone for use with a variety of chemicals and fluids. Can be used across a wide temperature range from -65 degrees f (-54 degrees c) to 450 degrees f (232 degrees c). Round in cross-section to provide a seal between cylindrical overlapping surfaces.

 

Black Anodized AN Flare to AN O-ring ORB Male Fuel Pump Rail Adapter Flare Hose Thread Oring Boss JIC Flare Twin Fitting male -6AN to -8AN with 8 Oring

Black Anodized AN Flare to AN O-ring ORB Male Fuel Pump Rail Adapter Flare Hose, Thread Oring Boss JIC, Flare Twin Fitting (male -6AN to -8AN with 8 Oring)

Black Anodized AN Flare to AN O-ring ORB Male Fuel Pump Rail Adapter Flare Hose, Thread Oring Boss JIC, Flare Twin Fitting (male -6AN to -8AN with 8 Oring) - Size jic -6 an male flare to -8 an male thread with a 8 o ring orb pipe hose fitting connector. Universal fit such as oil/ fuel/ gas/ water/ fluid/ air line hose ends. Surface treatment black anodized finish for durability. Material made of high quality lightweight 6061-t6 aluminum. Male an flare to male an o ring thread hex head pipe hose connector.

 

VAPKER 950 Pcs O Ring 05mm Watch Back Rubber Gasket set O-Ring Gasket Seal Replacement O-rings for Watch Backs 19 Different Sizes 12-30mm

VAPKER 950 Pcs O Ring 0.5mm Watch Back Rubber Gasket set O-Ring Gasket Seal Replacement O-rings for Watch Backs 19 Different Sizes 12-30mm

VAPKER 950 Pcs O Ring 0.5mm Watch Back Rubber Gasket set O-Ring Gasket Seal Replacement O-rings for Watch Backs 19 Different Sizes 12-30mm - Comes 50pcs each size in a poly bag (total 50pcs x 19 = 950pcs). Play role in watch waterproof,suitable for watch repair and diy watchmaker. 19 different sizes from 12 to 30 mm 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 and 30mm. O-rings thickness 05mm. Rubber gasket set that is installed on the watch back case,can cover the gap between the watch band.

 

Cal Hawk CZORS 225 O-Ring Assortment Kit SAE Pneumatic Air Rubber Hydraulic Tool Set

Cal Hawk CZORS 225 O-Ring Assortment Kit SAE Pneumatic Air Rubber Hydraulic Tool Set

Cal Hawk CZORS 225 O-Ring Assortment Kit SAE Pneumatic Air Rubber Hydraulic Tool Set - 5/8″ x 3/4″5-pc. Contents20-pc. 3/8″ x 1/2″5-pc. 7/32″ x 11/32″20-pc. 3/4″ x 1″. 5/8″ x 13/16″5-pc. 3/16″ x 5/16″20-pc. 9/16″ x 3/4″5-pc. 7/16″ x 5/8″5-pc. 13/16″ x 1-1/16″5-pc. 5/16″ x 7/16″20-pc. 3/32″ x 15/64″ 20-pc. 3/8″ x 9/16″20-pc. 5/32″ x 9/32″20-pc. 3/4″ x 15/16″5-pc. 1/4″ x 3/8″20-pc. 1/2″ x 11/16″5-pc. 11/16″ x 7/8″5-pc. 1/8″ x 1/4″20-pc.

 

3 Pack GE HHRING for GXWH30C GXWH35F GNWH38F GNWH38S GXWH40L Buna-N ORing by Captain O-Ring LLC

(3 Pack) GE HHRING (for GXWH30C, GXWH35F, GNWH38F, GNWH38S, GXWH40L) Buna-N ORing by Captain O-Ring LLC

(3 Pack) GE HHRING (for GXWH30C, GXWH35F, GNWH38F, GNWH38S, GXWH40L) Buna-N ORing by Captain O-Ring LLC - Warrantied for one year against manufacturer defect by captain o-ring llc. Contains three (3) o-rings.

 

208 Buna-N O-Ring 70A Durometer Black 58 ID 78 OD 18 Width Pack of 100

208 Buna-N O-Ring, 70A Durometer, Black, 5/8″ ID, 7/8″ OD, 1/8″ Width (Pack of 100)

208 Buna-N O-Ring, 70A Durometer, Black, 5/8″ ID, 7/8″ OD, 1/8″ Width (Pack of 100) - Meets standards defined by aerospace standard as568a. Durometer (hardness) of 70a for resistance to penetration. Round in cross-section to provide a seal between cylindrical overlapping surfaces. Made of buna-nitrile (also called buna-n) for use with a variety of fluids and hydrocarbons. Can be used across a wide temperature range from -30 degrees f (-34 degrees c) to 250 degrees f (121 degrees c).

 

Neiko 20758A Spoon Tip Seal Remover Set 4 Piece  O-Ring Removal  Non-Marring

Neiko 20758A Spoon Tip Seal Remover Set, 4 Piece | O-Ring Removal | Non-Marring

Neiko 20758A Spoon Tip Seal Remover Set, 4 Piece | O-Ring Removal | Non-Marring - Easily remove stubborn seals or difficult o rings with ease with the rounded tip removers. Remove without worrying about damaging the surface underneath or damaging your seals or o rings. Curved ends makes it ideal to access hard to reach places. Acetate handle provides a firm grip yet being impact resistant to any damages. Set comes with two spoon tip and two contoured tips in an industrial black finish for extra durability.

 

uxcell 100Pcs 4mmx1mm Nitrile Rubber O-rings Heat Resistant Sealing Ring Grommets Black

uxcell 100Pcs 4mmx1mm Nitrile Rubber O-rings Heat Resistant Sealing Ring Grommets Black

uxcell 100Pcs 4mmx1mm Nitrile Rubber O-rings Heat Resistant Sealing Ring Grommets Black - Resist oils, hydraulic fluid and water. These o ring are used on automotive components, machinery components and bathroom facilities, household  electrical appliances and electronic instruments, etc. Features4mm outside diameter and 1mm thickness. Flexible nitrile rubber o ring seal.

 

008 Buna-N O-Ring 50A Durometer Round Black 316 ID 516 OD 116 Width Pack of 125

008 Buna-N O-Ring, 50A Durometer, Round, Black, 3/16″ ID, 5/16″ OD, 1/16″ Width (Pack of 125)

008 Buna-N O-Ring, 50A Durometer, Round, Black, 3/16″ ID, 5/16″ OD, 1/16″ Width (Pack of 125) - Made of buna-nitrile (also called buna-n) for use with a variety of fluids from petroleum to aliphatic hydrocarbons. For use across a wide temperature range from -30 degrees f/-34 degrees c to 250 degrees f/121 degrees c. Durometer (hardness) of 50a for resistance to penetration. Meets standards defined by aerospace standard as568a. Round cross-section to provide a seal between cylindrical overlapping surfaces.

 

246355 Graco Fusion O-Ring Rebuild Kit for Air Purge from Foam Parts USA

246355 Graco Fusion O-Ring Rebuild Kit for Air Purge from Foam Parts USA

246355 Graco Fusion O-Ring Rebuild Kit for Air Purge from Foam Parts USA - 246355 aftermarket graco complete o-ring seal kit for fusion ap by foam parts usa. This kit is made up of the exact same or better oring material as oem, including viton, viton extreme and teflon. Each kit contains the following part numbers part# 246354 (5) part# 248128 (2) part# 248129 (2) part# 248130 (4) part# 248131 (1) part# 248134 (1) part# 248137 (1) part# 248132 (1) part# 248136 (1) part# 248133 (2) part# 248135 (1). Viton is a registered trademark of dupont performance coatings. Teflon is a registered trademark of dupont. Graco and fusion are registered trademarks of graco, inc.

 

Leak Stopper - Permanent O-Ring for CO2 Gas Cylinders

Leak Stopper – Permanent O-Ring for CO2 Gas Cylinders

Leak Stopper – Permanent O-Ring for CO2 Gas Cylinders - The leak stopper is the solution to leaky metal-on-metal or fiber washer connections between your co2 cylinder and regulator. Brass with o-ring insert, it threads directly into the cylinder with no modification and provides a tight, leak-proof seal.

 

018 Buna-N O-Ring 70A Durometer Black 34 ID 78 OD 116 Width Pack of 100

018 Buna-N O-Ring, 70A Durometer, Black, 3/4″ ID, 7/8″ OD, 1/16″ Width (Pack of 100)

018 Buna-N O-Ring, 70A Durometer, Black, 3/4″ ID, 7/8″ OD, 1/16″ Width (Pack of 100) - Round in cross-section to provide a seal between cylindrical overlapping surfaces. Can be used across a wide temperature range from -30 degrees f (-34 degrees c) to 250 degrees f (121 degrees c). Durometer (hardness) of 70a for resistance to penetration. Meets standards defined by aerospace standard as568a. Made of buna-nitrile (also called buna-n) for use with a variety of fluids and hydrocarbons.

 

3 Pack Whirlpool WHKF-DWHV WHCF-DWHV WHKF-DWH WHKF-DUF Water Filter Orings by Captain O-Ring

(3 Pack) Whirlpool WHKF-DWHV, WHCF-DWHV, WHKF-DWH & WHKF-DUF Water Filter Orings by Captain O-Ring

(3 Pack) Whirlpool WHKF-DWHV, WHCF-DWHV, WHKF-DWH & WHKF-DUF Water Filter Orings by Captain O-Ring - “Captain o-ring” is a registered trademark of captain o-ring llc. Three (3) replacement o-rings for your whirlpool filter. Captain o-ring’s top quality replacement o-rings create a watertight seal between your water filter sump and the water filter head. Compatible with whirlpool filter housings whkf-dwh, whkf-dwhv, whcf-dwhv, and whkf-duf. Manufactured and warrantied against defect for one year by captain o-ring llc. What to expect this item includes three (3) o-rings in a resealable zip-top poly bag with “captain o-ring” branded packaging.

 

327 Silicone O-Ring 70A Durometer Red 1-34 ID 2-18 OD 316 Width Pack of 5

327 Silicone O-Ring, 70A Durometer, Red, 1-3/4″ ID, 2-1/8″ OD, 3/16″ Width (Pack of 5)

327 Silicone O-Ring, 70A Durometer, Red, 1-3/4″ ID, 2-1/8″ OD, 3/16″ Width (Pack of 5) - Durometer (hardness) of 70a for resistance to penetration. Round in cross-section to provide a seal between cylindrical overlapping surfaces. Can be used across a wide temperature range from -65 degrees f (-54 degrees c) to 450 degrees f (232 degrees c). Meets standards defined by aerospace standard as568a. Made of silicone for use with a variety of chemicals and fluids.

 

007 Silicone O-Ring 70A Durometer Red 532 ID 932 OD 116 Width Pack of 100

007 Silicone O-Ring, 70A Durometer, Red, 5/32″ ID, 9/32″ OD, 1/16″ Width (Pack of 100)

007 Silicone O-Ring, 70A Durometer, Red, 5/32″ ID, 9/32″ OD, 1/16″ Width (Pack of 100) - Can be used across a wide temperature range from -65 degrees f (-54 degrees c) to 450 degrees f (232 degrees c). Made of silicone for use with a variety of chemicals and fluids. Meets standards defined by aerospace standard as568a. Durometer (hardness) of 70a for resistance to penetration. Round in cross-section to provide a seal between cylindrical overlapping surfaces.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.