Coolest 25 Cvd Coatings

 

Accusize Tools - 10 PcsBox Carbide Inserts CVD Coating TCMT3251 BlackYellow 2224-1034

Accusize Tools – 10 Pcs/Box Carbide Inserts CVD Coating TCMT32.51 Black/Yellow, #2224-1034

Accusize Tools – 10 Pcs/Box Carbide Inserts CVD Coating TCMT32.51 Black/Yellow, #2224-1034 - Bps101 black/yellow coating grade. Limitations depth of cut and feed, risk of overloading the cutting edge. Can bear high temperatures. Continue cutting to light interrupted cutting. Machining of gray and ductile iron at low to medium cutting speed. Operations turning, facing and profiling. For steel and steel castings finishing to roughing processing. Combination of fibrous ticn and fine grained al2o3 increases abrasion resistance and anti-chipping. Wet and dry processing. Advantages all-round, reliable with problem-free machining. Components typically axles, shafts, hubs, gears, etc. For hard materials continuous cutting and light interrupted cutting from finishing to roughing. Cvd coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness. Preferred choice chip breaker on general purpose finishing. For medium-duty turning with broad capability for steel, stainless steel, grey and nodular cast-iron.

 

Revolver Carbide DNMG 432-QF GP1225 Carbide Turning Insert QF Chipbreaker GP1225 Grade for medium to semi-roughing MT-CVD Coating 12” iC 164” Corner Radius 10 per pack

Revolver Carbide DNMG 432-QF GP1225 Carbide Turning Insert, QF Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack)

Revolver Carbide DNMG 432-QF GP1225 Carbide Turning Insert, QF Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack) - Revolver carbide tnmg 431-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide dnmg 432-qf gp1225 carbide turning insert, qf chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide tnmg 543-qr gp1225 carbide turning insert, qr chipbreaker for roughing, gp1225 grade for medium to semi-roughing, mt-cvd coating, 5/8″ ic, 3/64″ corner radius (10 per pack). Revolver carbide dnmg 432-qm gp1225 carbide turning insert, qf chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack).

 

Accusize Tools - 10 PcsBox Carbide Inserts CVD Coating CCMT 432 BlackYellow 2200-1020x10

Accusize Tools – 10 Pcs/Box Carbide Inserts CVD Coating CCMT 432 Black/Yellow, #2200-1020×10

Accusize Tools – 10 Pcs/Box Carbide Inserts CVD Coating CCMT 432 Black/Yellow, #2200-1020×10 - Insert style ccmt. 10 pcs/box carbide inserts cvd coating ccmt 432 black/yellow, #2200-1020×10. Insert size 432. 2200-1020×10. Ansi # ccmt 432.

 

AccusizeTools - 10 PcsBox Carbide Inserts CVD Coating CCMT3251 BlackYellow 2200-1014x10

AccusizeTools – 10 Pcs/Box Carbide Inserts CVD Coating CCMT32.51 Black/Yellow, #2200-1014×10

AccusizeTools – 10 Pcs/Box Carbide Inserts CVD Coating CCMT32.51 Black/Yellow, #2200-1014×10 - Cad 4060 per box = 10 ps inserts. Ccmt3251 tin coated. Ccmt3251 carbide inserts tin coated 10 pcs/box, #2100-1014×10. Ansi # ccmt3251. Insert style ccmt.

 

Ceratizit 11828619 VCMT Carbide Turning Insert 35-Deg Diamond Shape Grade CTCP135 with CVD Coating 12 mm Nose Radius -SM Chipbreaker Screw Mount 952 mm Insert Size Size 16

Ceratizit 11828619 VCMT Carbide Turning Insert, 35-Deg. Diamond Shape, Grade CTCP135 with CVD Coating, 1.2 mm Nose Radius, -SM Chipbreaker, Screw Mount, 9.52 mm Insert Size, Size 16

Ceratizit 11828619 VCMT Carbide Turning Insert, 35-Deg. Diamond Shape, Grade CTCP135 with CVD Coating, 1.2 mm Nose Radius, -SM Chipbreaker, Screw Mount, 9.52 mm Insert Size, Size 16 - Single-sided positive insert with 7-degree clearance angle for light cutting forces and side clearance. 35-degree diamond shape reduces vibration and provides accessibility for finishing turning and facing applications. Screw mounting style is compatible with multiple toolholders. Grade ctcp135 carbide material has a chemical vapor deposition (cvd) coating for high wear resistance and is suitable for use with steel and stainless steel.

 

Accusize Tools - 10 PcsBox Carbide Inserts CVD Coating CCMT2151 BlackYellow 2200-1008

Accusize Tools – 10 Pcs/Box Carbide Inserts CVD Coating CCMT21.51 Black/Yellow, #2200-1008

Accusize Tools – 10 Pcs/Box Carbide Inserts CVD Coating CCMT21.51 Black/Yellow, #2200-1008 - Wet and dry processing. Components typically axles, shafts, hubs, gears, etc. Machining of gray and ductile iron at low to medium cutting speed. Continue cutting to light interrupted cutting. Advantages all-round, reliable with problem-free machining. Can bear high temperatures. Bps101 black/yellow coating grade. Limitations depth of cut and feed, risk of overloading the cutting edge. Cvd coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness. Combination of fibrous ticn and fine grained al2o3 increases abrasion resistance and anti-chipping. Preferred choice chip breaker on general purpose finishing. Operations turning, facing and profiling. For hard materials continuous cutting and light interrupted cutting from finishing to roughing. For medium-duty turning with broad capability for steel, stainless steel, grey and nodular cast-iron. For steel and steel castings finishing to roughing processing.

 

Accusize Tools - 10 PcsBox Carbide Inserts CVD Coating DNMG432 BlackYellow 2206-1028

Accusize Tools – 10 Pcs/Box Carbide Inserts CVD Coating DNMG432 Black/Yellow, #2206-1028

Accusize Tools – 10 Pcs/Box Carbide Inserts CVD Coating DNMG432 Black/Yellow, #2206-1028 - Bps101 black/yellow coating grade. Cvd coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness. Wet and dry processing. Machining of gray and ductile iron at low to medium cutting speed. Can bear high temperatures. Preferred choice chip breaker on general purpose finishing. Combination of fibrous ticn and fine grained al2o3 increases abrasion resistance and anti-chipping. Components typically axles, shafts, hubs, gears, etc. Limitations depth of cut and feed, risk of overloading the cutting edge. Operations turning, facing and profiling. For hard materials continuous cutting and light interrupted cutting from finishing to roughing. Continue cutting to light interrupted cutting. For medium-duty turning with broad capability for steel, stainless steel, grey and nodular cast-iron. Advantages all-round, reliable with problem-free machining. For steel and steel castings finishing to roughing processing.

 

Revolver Carbide DNMG 432-QF GP1115 Carbide Turning Insert QF Chipbreaker GP1115 Grade for Finishing MT-CVD Coating 12” iC 164” Corner Radius 10 per pack

Revolver Carbide DNMG 432-QF GP1115 Carbide Turning Insert, QF Chipbreaker, GP1115 Grade for Finishing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack)

Revolver Carbide DNMG 432-QF GP1115 Carbide Turning Insert, QF Chipbreaker, GP1115 Grade for Finishing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack) - Revolver carbide dnmg 432-qf gp1225 carbide turning insert, qf chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide tnmg 543-qr gp1225 carbide turning insert, qr chipbreaker for roughing, gp1225 grade for medium to semi-roughing, mt-cvd coating, 5/8″ ic, 3/64″ corner radius (10 per pack). Revolver carbide dnmg 431-qf gp1225 carbide turning insert, qf chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide dnmg 432-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack).

 

Revolver Carbide VNMG 332-QM GP1225 Carbide Turning Insert QM Chipbreaker GP1225 Grade for medium to semi-roughing MT-CVD Coating 38” iC 132” Corner Radius 10 per pack

Revolver Carbide VNMG 332-QM GP1225 Carbide Turning Insert, QM Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 3/8” iC, 1/32” Corner Radius (10 per pack)

Revolver Carbide VNMG 332-QM GP1225 Carbide Turning Insert, QM Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 3/8” iC, 1/32” Corner Radius (10 per pack) - Revolver carbide wnmg 433-qr gp1225 carbide turning insert, qr chipbreaker, gp1225 grade for roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide wnmg 431-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide vnmg 332-qm gp1225 carbide turning insert, qm chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 3/8″ ic, 1/32″ corner radius (10 per pack). Revolver carbide wnmg 432-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack).

 

Ceratizit 11513994 WNMG Carbide Turning Insert Trigon Shape Grade CTCP125 with CVD Coating 16 mm Nose Radius -TRM Chipbreaker PinClamp Mount 127 mm Insert Size Size 8

Ceratizit 11513994 WNMG Carbide Turning Insert, Trigon Shape, Grade CTCP125 with CVD Coating, 1.6 mm Nose Radius, -TRM Chipbreaker, Pin/Clamp Mount, 12.7 mm Insert Size, Size 8

Ceratizit 11513994 WNMG Carbide Turning Insert, Trigon Shape, Grade CTCP125 with CVD Coating, 1.6 mm Nose Radius, -TRM Chipbreaker, Pin/Clamp Mount, 12.7 mm Insert Size, Size 8 - Screw mounting style is compatible with multiple toolholders. Grade ctcp115 carbide material has a chemical vapor deposition (cvd) coating for high wear resistance and is suitable for use with steel and stainless steel. Double-sided negative insert with zero-degree clearance for external turning. Trigon shape has 80-degree angles for light roughing and semifinishing applications. Pin/clamp mounting style is compatible with multiple toolholders.

 

Revolver Carbide VNMG 331-QM GP1225 Carbide Turning Insert QM Chipbreaker GP1225 Grade for medium to semi-roughing MT-CVD Coating 38” iC 164” Corner Radius 10 per pack

Revolver Carbide VNMG 331-QM GP1225 Carbide Turning Insert, QM Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 3/8” iC, 1/64” Corner Radius (10 per pack)

Revolver Carbide VNMG 331-QM GP1225 Carbide Turning Insert, QM Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 3/8” iC, 1/64” Corner Radius (10 per pack) - Revolver carbide wnmg 433-qr gp1225 carbide turning insert, qr chipbreaker, gp1225 grade for roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide vnmg 332-qm gp1225 carbide turning insert, qm chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 3/8″ ic, 1/32″ corner radius (10 per pack). Revolver carbide wnmg 432-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide vnmg 331-qm gp1225 carbide turning insert, qm chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 3/8″ ic, 1/64″ corner radius (10 per pack).

 

Revolver Carbide DNMG 431-QM GP1225 Carbide Turning Insert QM Chipbreaker GP1225 Grade for medium to semi-roughing MT-CVD Coating 12” iC 164” Corner Radius 10 per pack

Revolver Carbide DNMG 431-QM GP1225 Carbide Turning Insert, QM Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack)

Revolver Carbide DNMG 431-QM GP1225 Carbide Turning Insert, QM Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack) - Revolver carbide dnmg 432-qm gp1225 carbide turning insert, qf chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide dnmg 431-qm gp1225 carbide turning insert, qm chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide tnmg 431-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide tnmg 543-qr gp1225 carbide turning insert, qr chipbreaker for roughing, gp1225 grade for medium to semi-roughing, mt-cvd coating, 5/8″ ic, 3/64″ corner radius (10 per pack).

 

Revolver Carbide WNMG 432-QR GP1135 Carbide Turning Insert QR Chipbreaker GP1135 Grade for roughing MT-CVD Coating 12” iC 132” Corner Radius 10 per pack

Revolver Carbide WNMG 432-QR GP1135 Carbide Turning Insert, QR Chipbreaker, GP1135 Grade for roughing, MT-CVD Coating, 1/2” iC, 1/32” Corner Radius (10 per pack)

Revolver Carbide WNMG 432-QR GP1135 Carbide Turning Insert, QR Chipbreaker, GP1135 Grade for roughing, MT-CVD Coating, 1/2” iC, 1/32” Corner Radius (10 per pack) - Revolver carbide wnmg 432-qr gp1135 carbide turning insert, qr chipbreaker, gp1135 grade for roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide wnmg 433-qr gp1225 carbide turning insert, qr chipbreaker, gp1225 grade for roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Material carbide, coating cvd al2o3 ticn, machining parts material steel, machining process finish. Insert grade bps101.

 

Ceratizit 11717769 WNMG Carbide Turning Insert Trigon Shape Grade CTCK120 with CVD Coating 16 mm Nose Radius TMR Chipbreaker PinClamp Mount 127 mm Insert Size

Ceratizit 11717769 WNMG Carbide Turning Insert, Trigon Shape, Grade CTCK120 with CVD Coating, 1.6 mm Nose Radius, TMR Chipbreaker, Pin/Clamp Mount, 12.7 mm Insert Size,

Ceratizit 11717769 WNMG Carbide Turning Insert, Trigon Shape, Grade CTCK120 with CVD Coating, 1.6 mm Nose Radius, TMR Chipbreaker, Pin/Clamp Mount, 12.7 mm Insert Size, - Double-sided negative insert with zero-degree clearance for external turning. Grade ctck120 carbide material has a chemical vapor deposition (cvd) coating for high wear resistance and is suitable for use with cast iron. Pin/clamp mounting style is compatible with multiple toolholders. Screw mounting style is compatible with multiple toolholders. Trigon shape has 80-degree angles for light roughing and semifinishing applications.

 

AccusizeTools - 58 x 8 RH SCLCR Indexable Boring Bar with 10 Pcs CCMT Carbide CVD Coating Inserts P252-S405INS

AccusizeTools – 5/8” x 8” RH SCLCR Indexable Boring Bar with 10 Pcs CCMT Carbide CVD Coating Inserts, #P252-S405INS

AccusizeTools – 5/8” x 8” RH SCLCR Indexable Boring Bar with 10 Pcs CCMT Carbide CVD Coating Inserts, #P252-S405INS - Shank diameter 5/8”, overall length 8”, min bore 0866”. Boring from light roughing to finishing in small bores profiling bar for semi-finishing and finishing operations bar hardness approximately 45 hrc extreme gloss finish. Insert ccmt 3251 & key included. Accepts inserts ccmt 3251 and ccmt 3252. Negative 5 degree end & side cutting angle positive 80 degree diamond ccmt inserts.

 

Revolver Carbide WNMG 432-QM GP1225 Carbide Turning Insert QM Chipbreaker GP1225 Grade for medium to semi-roughing MT-CVD Coating 12” iC 132” Corner Radius 10 per pack

Revolver Carbide WNMG 432-QM GP1225 Carbide Turning Insert, QM Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 1/2” iC, 1/32” Corner Radius (10 per pack)

Revolver Carbide WNMG 432-QM GP1225 Carbide Turning Insert, QM Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 1/2” iC, 1/32” Corner Radius (10 per pack) - Revolver carbide wnmg 432-qm gp1225 carbide turning insert, qm chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Material carbide, coating cvd al2o3 ticn, machining parts material steel, machining process finish. Revolver carbide wnmg 433-qr gp1225 carbide turning insert, qr chipbreaker, gp1225 grade for roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide wnmg 432-qr gp1135 carbide turning insert, qr chipbreaker, gp1135 grade for roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack).

 

Revolver Carbide VNMG 331-QF GP1115 Carbide Turning Insert QF Chipbreaker GP1115 Grade for Finishing MT-CVD Coating 38” iC 164” Corner Radius 10 per pack

Revolver Carbide VNMG 331-QF GP1115 Carbide Turning Insert, QF Chipbreaker, GP1115 Grade for Finishing, MT-CVD Coating, 3/8” iC, 1/64” Corner Radius (10 per pack)

Revolver Carbide VNMG 331-QF GP1115 Carbide Turning Insert, QF Chipbreaker, GP1115 Grade for Finishing, MT-CVD Coating, 3/8” iC, 1/64” Corner Radius (10 per pack) - Revolver carbide wnmg 432-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide vnmg 331-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 3/8″ ic, 1/64″ corner radius (10 per pack). Revolver carbide vnmg 331-qm gp1225 carbide turning insert, qm chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 3/8″ ic, 1/64″ corner radius (10 per pack). Revolver carbide vnmg 332-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 3/8″ ic, 1/32″ corner radius (10 per pack).

 

Ceratizit 11737445 Carbide VNMG Turning Insert 35-Deg Diamond Shape Grade CTCK120 with CVD Coating 12 mm Nose Radius M50 Chipbreaker PinClamp Mount 952 mm Insert Size

Ceratizit 11737445 Carbide VNMG Turning Insert, 35-Deg. Diamond Shape, Grade CTCK120 with CVD Coating, 1.2 mm Nose Radius, M50 Chipbreaker, Pin/Clamp Mount, 9.52 mm Insert Size,

Ceratizit 11737445 Carbide VNMG Turning Insert, 35-Deg. Diamond Shape, Grade CTCK120 with CVD Coating, 1.2 mm Nose Radius, M50 Chipbreaker, Pin/Clamp Mount, 9.52 mm Insert Size, - Double-sided negative insert with zero-degree clearance for external turning. 35-degree diamond shape reduces vibration and provides accessibility for finishing turning and facing applications. Screw mounting style is compatible with multiple toolholders. Pin/clamp mounting style is compatible with multiple toolholders. Grade ctck120 carbide material has a chemical vapor deposition (cvd) coating for high wear resistance and is suitable for use with cast iron.

 

Revolver Carbide WNMG 432-QR GP1225 Carbide Turning Insert QR Chipbreaker GP1225 Grade for medium to semi-roughing MT-CVD Coating 12” iC 132” Corner Radius 10 per pack

Revolver Carbide WNMG 432-QR GP1225 Carbide Turning Insert, QR Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 1/2” iC, 1/32” Corner Radius (10 per pack)

Revolver Carbide WNMG 432-QR GP1225 Carbide Turning Insert, QR Chipbreaker, GP1225 Grade for medium to semi-roughing, MT-CVD Coating, 1/2” iC, 1/32” Corner Radius (10 per pack) - Revolver carbide dnmg 431-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide cnmg 432-qr gp1135 carbide turning insert, qr chipbreaker, gp1135 grade for roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide wnmg 432-qr gp1225 carbide turning insert, qr chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide cnmg 432-qr gp1225 carbide turning insert, qr chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack).

 

Ceratizit 11528632 Carbide VNMG Turning Insert 35-Deg Diamond Shape Grade CTCP125 with CVD Coating 12 mm Nose Radius -M50 Chipbreaker PinClamp Mount 952 mm Insert Size Size 16

Ceratizit 11528632 Carbide VNMG Turning Insert, 35-Deg. Diamond Shape, Grade CTCP125 with CVD Coating, 1.2 mm Nose Radius, -M50 Chipbreaker, Pin/Clamp Mount, 9.52 mm Insert Size, Size 16

Ceratizit 11528632 Carbide VNMG Turning Insert, 35-Deg. Diamond Shape, Grade CTCP125 with CVD Coating, 1.2 mm Nose Radius, -M50 Chipbreaker, Pin/Clamp Mount, 9.52 mm Insert Size, Size 16 - Double-sided negative insert with zero-degree clearance for external turning. 35-degree diamond shape reduces vibration and provides accessibility for finishing turning and facing applications. Grade ctcp115 carbide material has a chemical vapor deposition (cvd) coating for high wear resistance and is suitable for use with steel and stainless steel. Screw mounting style is compatible with multiple toolholders. Pin/clamp mounting style is compatible with multiple toolholders.

 

Revolver Carbide CNMG 431-QF GP1115 Carbide Turning Insert QF Chipbreaker GP1115 Grade for Finishing MT-CVD Coating 12” iC 164” Corner Radius 10 per pack

Revolver Carbide CNMG 431-QF GP1115 Carbide Turning Insert, QF Chipbreaker, GP1115 Grade for Finishing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack)

Revolver Carbide CNMG 431-QF GP1115 Carbide Turning Insert, QF Chipbreaker, GP1115 Grade for Finishing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack) - Revolver carbide dnmg 431-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide cnmg 432-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide cnmg 431-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide cnmg 431-qm gp1225 carbide turning insert, qm chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack).

 

AccusizeTools - 38 x 6 RH SCLCR Indexable Boring Bar with 10 Pcs CCMT Carbide CVD Coating Inserts P252-S401INS

AccusizeTools – 3/8″ x 6″ RH SCLCR Indexable Boring Bar with 10 Pcs CCMT Carbide CVD Coating Inserts, #P252-S401INS

AccusizeTools – 3/8″ x 6″ RH SCLCR Indexable Boring Bar with 10 Pcs CCMT Carbide CVD Coating Inserts, #P252-S401INS - Boring from light roughing to finishing in small bores profiling bar for semi-finishing and finishing operations bar hardness approximately 45 hrc extreme gloss finish. Insert ccmt 2151 & key included. Shank diameter 3/8”, overall length 6”, min bore 468”. Accepts inserts ccmt 2151 and ccmt 2152. Negative 5 degree end & side cutting angle positive 80 degree diamond ccmt inserts.

 

Ceratizit 11163219 WNMG Carbide Turning Insert Trigon Shape Grade CTC1135 with CVD Coating 08 mm Nose Radius TMF Chipbreaker PinClamp Mount 127 mm Insert Size

Ceratizit 11163219 WNMG Carbide Turning Insert, Trigon Shape, Grade CTC1135 with CVD Coating, 0.8 mm Nose Radius, TMF Chipbreaker, Pin/Clamp Mount, 12.7 mm Insert Size,

Ceratizit 11163219 WNMG Carbide Turning Insert, Trigon Shape, Grade CTC1135 with CVD Coating, 0.8 mm Nose Radius, TMF Chipbreaker, Pin/Clamp Mount, 12.7 mm Insert Size, - Double-sided negative insert with zero-degree clearance for external turning. Grade ctc1135 carbide material has a chemical vapor deposition (cvd) coating for high wear resistance and is suitable for use with steel and stainless steel. Trigon shape has 80-degree angles for light roughing and semifinishing applications. Pin/clamp mounting style is compatible with multiple toolholders. Screw mounting style is compatible with multiple toolholders.

 

Revolver Carbide WNMG 433-QR GP1135 Carbide Turning Insert QR Chipbreaker GP1135 Grade for roughing MT-CVD Coating 12” iC 132” Corner Radius 10 per pack

Revolver Carbide WNMG 433-QR GP1135 Carbide Turning Insert, QR Chipbreaker, GP1135 Grade for roughing, MT-CVD Coating, 1/2” iC, 1/32” Corner Radius (10 per pack)

Revolver Carbide WNMG 433-QR GP1135 Carbide Turning Insert, QR Chipbreaker, GP1135 Grade for roughing, MT-CVD Coating, 1/2” iC, 1/32” Corner Radius (10 per pack) - Insert grade bps101. Revolver carbide wnmg 433-qr gp1135 carbide turning insert, qr chipbreaker, gp1135 grade for roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Chip breaker md. Material carbide, coating cvd al2o3 ticn, machining parts material steel, machining process finish.

 

Revolver Carbide WNMG 431-QF GP1115 Carbide Turning Insert QF Chipbreaker GP1115 Grade for Finishing MT-CVD Coating 12” iC 164” Corner Radius 10 per pack

Revolver Carbide WNMG 431-QF GP1115 Carbide Turning Insert, QF Chipbreaker, GP1115 Grade for Finishing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack)

Revolver Carbide WNMG 431-QF GP1115 Carbide Turning Insert, QF Chipbreaker, GP1115 Grade for Finishing, MT-CVD Coating, 1/2” iC, 1/64” Corner Radius (10 per pack) - Revolver carbide wnmg 433-qr gp1225 carbide turning insert, qr chipbreaker, gp1225 grade for roughing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack). Revolver carbide wnmg 431-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide wnmg 431-qm gp1225 carbide turning insert, qm chipbreaker, gp1225 grade for medium to semi-roughing, mt-cvd coating, 1/2″ ic, 1/64″ corner radius (10 per pack). Revolver carbide wnmg 432-qf gp1115 carbide turning insert, qf chipbreaker, gp1115 grade for finishing, mt-cvd coating, 1/2″ ic, 1/32″ corner radius (10 per pack).