Coolest 21 Steel Single End Countersinks

 

KEO 52009 High-Speed Steel Single-End Countersink TiN Coated 4 Flutes 90 Degree Point Angle Round Shank 34 Shank Diameter 2 Body Diameter #ad

KEO 52009 High-Speed Steel Single-End Countersink, TiN Coated, 4 Flutes, 90 Degree Point Angle, Round Shank, 3/4″ Shank Diameter, 2″ Body Diameter

KEO 52009 High-Speed Steel Single-End Countersink, TiN Coated, 4 Flutes, 90 Degree Point Angle, Round Shank, 3/4″ Shank Diameter, 2″ Body Diameter #ad - 90 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

KEO 50059 Cobalt Steel Single-End Countersink Set Uncoated Bright Finish Single Flute 90 Degree Angle 14 - 1 Body Diameter #ad

KEO 50059 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, Single Flute, 90 Degree Angle, 1/4″ – 1″ Body Diameter

KEO 50059 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, Single Flute, 90 Degree Angle, 1/4″ – 1″ Body Diameter #ad - Each 5-piece set includes one piece each of 1/4, 3/8, 1/2, 3/4, 1″ body diameter with a particular included point angle. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. 90 degree angle. Iso 90012008 certified. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

KEO 53511 Cobalt Steel Single-End Countersink Uncoated Bright Finish 82 Degree Point Angle Round Shank 14 Shank Diameter 38 Body Diameter 3 Pack #ad

KEO 53511 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 1/4″ Shank Diameter, 3/8″ Body Diameter (3 Pack)

KEO 53511 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 1/4″ Shank Diameter, 3/8″ Body Diameter (3 Pack) #ad - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications round shanks allow use with a wide variety of toolholding systems when run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce c. 【Main function】the countersink deburring drill bit can be used for deburring cross holes, deep holes, straight edges, curved edges aavailable for mdf, plywood, acrylic, pvc board, plastic and soft metal. 【solid and durable】the rustproof, solid and durable bit cuts edge soomthly without chatter and fluted edges. 【Buy with confidence】we offer “two year” warranty on item(s) that confirm to be manufacturer defectwe’ll respond within 24 hours on weekdays(please clamp the shaft in right place and necessary protective measures in woodworking processing). 【Scientific design】spiral fluted tools help to evacuate chips up and out of the cut to reduce clogging.

 

KEO 53511 Cobalt Steel Single-End Countersink TiN Coated 82 Degree Point Angle Round Shank 14 Shank Diameter 38 Body Diameter #ad

KEO 53511 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 1/4″ Shank Diameter, 3/8″ Body Diameter

KEO 53511 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 1/4″ Shank Diameter, 3/8″ Body Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 82 degree angle. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

KEO 55315 Cobalt Steel Single-End Countersink Uncoated Bright Finish 3 Flutes 82 Degree Point Angle Round Shank 12 Shank Diameter 1 Body Diameter #ad

KEO 55315 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1″ Body Diameter

KEO 55315 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1″ Body Diameter #ad - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. 82 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Union Butterfield 4603 Series High-Speed Steel Single-End Countersink Uncoated Bright Finish Single Flute 82 Degrees 14 Shank Dia 38 Body Dia #ad

Union Butterfield 4603 Series High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 82 Degrees, 1/4″ Shank Dia, 3/8″ Body Dia.

Union Butterfield 4603 Series High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 82 Degrees, 1/4″ Shank Dia, 3/8″ Body Dia. #ad - Uncoated (bright) finish has no additional surface treatment or coating. Single flute cuts quickly and reduces vibration compared to multiple flutes. Single-ended tool has a round shank that accommodates most drill chucks. High-speed steel (hss) provides hardness for wear resistance. Creates an 82-degree countersink that accepts a flat-head fastener so it sits flush with the surface.

 

KEO 53514 Cobalt Steel Single-End Countersink Uncoated Bright Finish 82 Degree Point Angle Round Shank 38 Shank Diameter 34 Body Diameter #ad

KEO 53514 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 3/8″ Shank Diameter, 3/4″ Body Diameter

KEO 53514 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 3/8″ Shank Diameter, 3/4″ Body Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. 90 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

KEO 50049 Cobalt Steel Single-End Countersink Set Uncoated Bright Finish 6 Flutes 90 Degree Angle 14 - 1 Body Diameter #ad

KEO 50049 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Angle, 1/4″ – 1″ Body Diameter

KEO 50049 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Angle, 1/4″ – 1″ Body Diameter #ad - 90 degree angle. Cobalt sets include one piece each of 1/4, 3/8, 1/2, 3/4, 1″ body diameter with a particular included point angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Iso 90012008 certified.

 

KEO 55032 High-Speed Steel Single-End Countersink Uncoated Bright Finish 6 Flutes 82 Degree Point Angle Round Shank 12 Shank Diameter 1-14 Body Diameter #ad

KEO 55032 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1-1/4″ Body Diameter

KEO 55032 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1-1/4″ Body Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 82 degree angle.

 

KEO 53519 Cobalt Steel Single-End Countersink Set TiN Coated 82 Degree Point Angle 516 - 1 Head Diameter #ad

KEO 53519 Cobalt Steel Single-End Countersink Set, TiN Coated, 82 Degree Point Angle, 5/16″ – 1″ Head Diameter

KEO 53519 Cobalt Steel Single-End Countersink Set, TiN Coated, 82 Degree Point Angle, 5/16″ – 1″ Head Diameter #ad - Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Made in great britain. Straight shank, cnc precision cam ground, m35 cobalt, chatter-free cutting action. 82 degree angleapplication countersinks and deburs aluminum, non-metallics and plastics.

 

Magafor 431 Series Cobalt Steel Single-End Countersink Uncoated Bright Finish 3 Flutes 90 Degrees Round Shank 0158 Shank Dia 0170 Body Dia #ad

Magafor 431 Series Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 90 Degrees, Round Shank, 0.158″ Shank Dia., 0.170″ Body Dia.

Magafor 431 Series Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 90 Degrees, Round Shank, 0.158″ Shank Dia., 0.170″ Body Dia. #ad - Uncoated (bright) finish has no additional surface treatment or coating. Single-ended tool has a round shank that accommodates most drill chucks. Cobalt steel provides extended tool life compared to high-speed steel when cutting hard materials. Creates a 90-degree countersink that accepts a flat-head fastener so it sits flush with the surface. Three flutes provide better chip clearance than four flutes to prevent clogging.

 

KEO 53512 Cobalt Steel Single-End Countersink Uncoated Bright Finish 82 Degree Point Angle Round Shank 516 Shank Diameter 12 Body Diameter #ad

KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 5/16″ Shank Diameter, 1/2″ Body Diameter

KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 5/16″ Shank Diameter, 1/2″ Body Diameter #ad - 82 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

KEO 53531 Cobalt Steel Single-End Countersink TiN Coated 100 Degree Point Angle Round Shank 14 Shank Diameter 38 Body Diameter #ad

KEO 53531 Cobalt Steel Single-End Countersink, TiN Coated, 100 Degree Point Angle, Round Shank, 1/4″ Shank Diameter, 3/8″ Body Diameter

KEO 53531 Cobalt Steel Single-End Countersink, TiN Coated, 100 Degree Point Angle, Round Shank, 1/4″ Shank Diameter, 3/8″ Body Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. 100 degree angle. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.

 

KEO 55051 High-Speed Steel Single-End Countersink Uncoated Bright Finish 6 Flutes 90 Degree Point Angle Round Shank 12 Shank Diameter 1 Body Diameter #ad

KEO 55051 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1″ Body Diameter

KEO 55051 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1″ Body Diameter #ad - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. 90 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

KEO 53248 High-Speed Steel Single-End Countersink Uncoated Bright Finish Single Flute 82 Degree Point Angle Round Shank 12 Shank Diameter 1-14 Body Diameter #ad

KEO 53248 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1-1/4″ Body Diameter

KEO 53248 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1-1/4″ Body Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 82 degree angle.

 

KEO 53519 Cobalt Steel Single-End Countersink Set Uncoated Bright Finish 82 Degree Point Angle 516 - 1 Head Diameter #ad

KEO 53519 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 82 Degree Point Angle, 5/16″ – 1″ Head Diameter

KEO 53519 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 82 Degree Point Angle, 5/16″ – 1″ Head Diameter #ad - 82 degree angle. Straight shank, cnc precision cam ground, m35 cobalt, chatter-free cutting action. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Made in great britain.

 

KEO 51008 High-Speed Steel Single-End Countersink Uncoated Bright Finish 3 Flutes 82 Degree Point Angle Round Shank 12 Shank Diameter 1 Body Diameter #ad

KEO 51008 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1″ Body Diameter

KEO 51008 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1″ Body Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. 82 degree angle. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

KEO 53516 Cobalt Steel Single-End Countersink Uncoated Bright Finish 82 Degree Point Angle Round Shank 12 Shank Diameter 1-14 Body Diameter #ad

KEO 53516 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1-1/4″ Body Diameter

KEO 53516 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 1/2″ Shank Diameter, 1-1/4″ Body Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. 90 degree angle.

 

KEO 53522 Cobalt Steel Single-End Countersink TiN Coated 90 Degree Point Angle Round Shank 516 Shank Diameter 12 Body Diameter #ad

KEO 53522 Cobalt Steel Single-End Countersink, TiN Coated, 90 Degree Point Angle, Round Shank, 5/16″ Shank Diameter, 1/2″ Body Diameter

KEO 53522 Cobalt Steel Single-End Countersink, TiN Coated, 90 Degree Point Angle, Round Shank, 5/16″ Shank Diameter, 1/2″ Body Diameter #ad - 90 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.

 

Dormer G136 Series High-Speed Steel Single-End Countersink Uncoated Bright Finish 3 Flutes 90 Degrees Round Shank 10 mm Shank Dia 165 mm Body Dia #ad

Dormer G136 Series High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 90 Degrees, Round Shank, 10 mm Shank Dia, 16.5 mm Body Dia.

Dormer G136 Series High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 90 Degrees, Round Shank, 10 mm Shank Dia, 16.5 mm Body Dia. #ad - High-speed steel (hss) provides hardness for wear resistance. Creates a 90-degree countersink that accepts a flat-head fastener so it sits flush with the surface. Three flutes provide better chip clearance than four flutes to prevent clogging. Single-ended tool has a round shank that accommodates most drill chucks. Uncoated (bright) finish has no additional surface treatment or coating for cutting soft ferrous and nonferrous materials.

 

Union Butterfield 4602 Series High-Speed Steel Single-End Countersink Uncoated Bright Finish 4 Flutes 60 Degrees 12 Shank Dia 12 Body Dia #ad

Union Butterfield 4602 Series High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 4 Flutes, 60 Degrees, 1/2″ Shank Dia, 1/2″ Body Dia.

Union Butterfield 4602 Series High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 4 Flutes, 60 Degrees, 1/2″ Shank Dia, 1/2″ Body Dia. #ad - Uncoated (bright) finish has no additional surface treatment or coating. High-speed steel (hss) provides hardness for wear resistance when cutting ferrous and nonferrous materials. Single-ended tool has a round shank that accommodates most drill chucks. Four flutes clear chips away to prevent clogging and have more wear resistance than three flutes. Creates a 60-degree countersink, which can be used for holding material between machine centers.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.