Best and Coolest 20 Drill Mills

 

Melin Tool AMG-DP Carbide Drill Mill Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 2 Overall Length 01875 Cutting Diameter 01875 Shank Diameter #ad

Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 2″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter

Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 2″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter #ad - Can be used for drilling, slotting, chamfering, and profile milling. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Available in 60 degree points. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Proxima Direct Center Drill Mill Cutter 5 Pcs Combined Drill 6PCS HSS 4 Flute Straight End Mill Cutters #ad

Proxima Direct Center Drill Mill Cutter 5 Pcs Combined Drill 6PCS HSS 4 Flute Straight End Mill Cutters

Proxima Direct Center Drill Mill Cutter 5 Pcs Combined Drill 6PCS HSS 4 Flute Straight End Mill Cutters #ad - Accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Center drill bit sizes 1, 2, 3, 4 and 5, 60° tip anglesmaterial hss. 6 pcs hss 4 flute end mill cuttersuit for hardness of metal for above 30 degrees. 5 pcs hss 60°centering drill & countersink bit used as starter holes to prevent a drill bit from walking. Applicationused for producing center holds in components or work pieces with require machining between center.

 

RedLine Tools RDM40324 - Drill Mill Carbide 383750 Dia 25000 OAL 383750 Shank Dia 10000 Flute Len 4 Flt Uncoated #ad

RedLine Tools RDM40324 – Drill Mill Carbide, 3/8″(.3750) Dia, 2.5000″ OAL, 3/8(.3750) Shank Dia, 1.0000″ Flute Len, 4 Flt, Uncoated

RedLine Tools RDM40324 – Drill Mill Carbide, 3/8″(.3750) Dia, 2.5000″ OAL, 3/8(.3750) Shank Dia, 1.0000″ Flute Len, 4 Flt, Uncoated #ad - Diameter 3/8 (3750). Substrate/coating carbide / uncoated. Helix angle 30°. Made in the usa. Flute length 10000″.

 

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill #ad

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill #ad - The precision ground cast iron milling table with coolant troughs and drain will accept an aftermarket coolant system and power feed. A 3/4 hp reversible variable-speed universal motor drives an all-steel geared hi/lo range gearbox which drives the 60mm diameter quill and r-8 spindle. Enjoy the precision ground dovetail column that allows for fast and easy tool changes without having to re-register the spindle centerline. These features combined with the outstanding x and y table travel of 5-3/4 x 15-1/2-inch make the m1110 mill/drill one of the most popular units available. The z-axis handwheel with the fully geared lift system easily lifts and lowers the headstock up to 14-3/4-inch. Made in an iso 9001 factory.

 

Cobra Carbide 15400 Micro Grain Solid Carbide Regular Length General End Mill Uncoated Bright Finish 2 Flute 30 Degrees Helix Drill Point End 316 Cutting Length 116 Cutting Diameter 1-12 Length Pack of 1 #ad

Cobra Carbide 15400 Micro Grain Solid Carbide Regular Length General End Mill, Uncoated (Bright) Finish, 2 Flute, 30 Degrees Helix, Drill Point End, 3/16″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length (Pack of 1)

Cobra Carbide 15400 Micro Grain Solid Carbide Regular Length General End Mill, Uncoated (Bright) Finish, 2 Flute, 30 Degrees Helix, Drill Point End, 3/16″ Cutting Length, 1/16″ Cutting Diameter, 1-1/2″ Length (Pack of 1) #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. 90 degrees drill point. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Can be used for drilling, slotting, chamfering and profile milling.

 

Magafor 8090 Carbide Drill Mill Inch and Metric Uncoated Bright Finish 90 Deg Point Angle 2 Flutes 2-34 Overall Length 120mm Cutting Diameter 12mm Shank Diameter #ad

Magafor 8090 Carbide Drill Mill, Inch and Metric, Uncoated (Bright) Finish, 90 Deg Point Angle, 2 Flutes, 2-3/4″ Overall Length, 12.0mm Cutting Diameter, 12mm Shank Diameter

Magafor 8090 Carbide Drill Mill, Inch and Metric, Uncoated (Bright) Finish, 90 Deg Point Angle, 2 Flutes, 2-3/4″ Overall Length, 12.0mm Cutting Diameter, 12mm Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. This multi use bits can be used for spotting, grooving, engraving, profiling, interpolation, drilling and chamfering.

 

RedLine Tools RDM40428 - Drill Mill Carbide 7164375 Dia 27500 OAL 7164375 Shank Dia 10000 Flute Len 4 Flt AlTiN Coated #ad

RedLine Tools RDM40428 – Drill Mill Carbide, 7/16″(.4375) Dia, 2.7500″ OAL, 7/16(.4375) Shank Dia, 1.0000″ Flute Len, 4 Flt, AlTiN Coated

RedLine Tools RDM40428 – Drill Mill Carbide, 7/16″(.4375) Dia, 2.7500″ OAL, 7/16(.4375) Shank Dia, 1.0000″ Flute Len, 4 Flt, AlTiN Coated #ad - Flute length 10000″. Made in the usa. Diameter 7/16 (4375). Helix angle 30°. Substrate/coating carbide / altin.

 

Micro 100 DMM-030-290 90° Included Point Angle Drill Mill 2 Flute Metric Dimensions Solid Carbide Tool 3 mm Cutter Diameter 3 mm Shank Diameter 38 mm Overall Length 8 mm Flute Length #ad

Micro 100 DMM-030-290 90° Included Point Angle Drill Mill, 2 Flute, Metric Dimensions, Solid Carbide Tool, 3 mm Cutter Diameter, 3 mm Shank Diameter, 38 mm Overall Length, 8 mm Flute Length

Micro 100 DMM-030-290 90° Included Point Angle Drill Mill, 2 Flute, Metric Dimensions, Solid Carbide Tool, 3 mm Cutter Diameter, 3 mm Shank Diameter, 38 mm Overall Length, 8 mm Flute Length #ad - Designed and engineered to perform both drilling and milling applications when applicable. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. The micro 100 dmm-030-290 metric size, uncoated , 2 flute, solid carbide, 90° included point angle, drill mill. Manufactured with close tolerances to ensure ultimate precision and performance. Tools can be utilized for both roughing and finishing. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates.

 

Melin Tool AMG-DP Carbide Drill Mill AlTiN Monolayer Finish 60 Deg Point Angle 2 Flutes 25 Overall Length 025 Cutting Diameter 025 Shank Diameter #ad

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 60 Deg Point Angle, 2 Flutes, 2.5″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 60 Deg Point Angle, 2 Flutes, 2.5″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Available in 60 degree points. Round shanks allow use with a wide variety of toolholding systems. Can be used for drilling, slotting, chamfering, and profile milling.

 

Melin Tool AMG-DP Carbide Drill Mill Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 25 Overall Length 0375 Cutting Diameter 0375 Shank Diameter #ad

Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Can be used for drilling, slotting, chamfering, and profile milling. Available in 82 degree points.

 

Micro 100 DMM-060-290 90° Included Point Angle Drill Mill 2 Flute Metric Dimensions Solid Carbide Tool 6 mm Cutter Diameter 6 mm Shank Diameter 57 mm Overall Length 16 mm Flute Length #ad

Micro 100 DMM-060-290 90° Included Point Angle Drill Mill, 2 Flute, Metric Dimensions, Solid Carbide Tool, 6 mm Cutter Diameter, 6 mm Shank Diameter, 57 mm Overall Length, 16 mm Flute Length

Micro 100 DMM-060-290 90° Included Point Angle Drill Mill, 2 Flute, Metric Dimensions, Solid Carbide Tool, 6 mm Cutter Diameter, 6 mm Shank Diameter, 57 mm Overall Length, 16 mm Flute Length #ad - Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Designed and engineered to perform both drilling and milling applications when applicable. Manufactured with close tolerances to ensure ultimate precision and performance. Tools can be utilized for both roughing and finishing. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. The micro 100 dmm-060-290 metric size, uncoated , 2 flute, solid carbide, 90° included point angle, drill mill.

 

NEW After Market 2 BELT SET Central MachineryHarbor Freight 42976 Drill  Mill Press #ad

NEW After Market 2 BELT SET Central Machinery/Harbor Freight 42976 Drill / Mill Press

NEW After Market 2 BELT SET Central Machinery/Harbor Freight 42976 Drill / Mill Press #ad - New replacement rubber 2 belt set harbor freight / central machinery model 42976 v belt drill press.

 

Melin Tool AMG-DP Carbide Micro Drill Mill Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 15 Overall Length 002 Cutting Diameter 0125 Shank Diameter #ad

Melin Tool AMG-DP Carbide Micro Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.02″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG-DP Carbide Micro Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.02″ Cutting Diameter, 0.125″ Shank Diameter #ad - Available in 90 degree points. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Can be used for drilling, slotting, chamfering, and profile milling.

 

Melin Tool AMG-DP Carbide Micro Drill Mill AlTiN Monolayer Finish 30 Deg Point Angle 2 Flutes 15 Overall Length 0015 Cutting Diameter 0125 Shank Diameter #ad

Melin Tool AMG-DP Carbide Micro Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.015″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG-DP Carbide Micro Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.015″ Cutting Diameter, 0.125″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Available in 90 degree points. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Can be used for drilling, slotting, chamfering, and profile milling. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Melin Tool AMG-DP Carbide Drill Mill AlTiN Monolayer Finish 30 Deg Point Angle 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter #ad

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter #ad - Available in 90 degree points. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Can be used for drilling, slotting, chamfering, and profile milling. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Round shanks allow use with a wide variety of toolholding systems.

 

Kodiak Cutting Tools KCT241715 USA Made Solid Carbide Drill Mill 90 Degree 2 Flute 14 Diameter 14 Shank 34 Length of Cut 2-12 Overall Length #ad

Kodiak Cutting Tools KCT241715 USA Made Solid Carbide Drill Mill, 90 Degree, 2 Flute, 1/4″ Diameter, 1/4″ Shank, 3/4″ Length of Cut, 2-1/2″ Overall Length

Kodiak Cutting Tools KCT241715 USA Made Solid Carbide Drill Mill, 90 Degree, 2 Flute, 1/4″ Diameter, 1/4″ Shank, 3/4″ Length of Cut, 2-1/2″ Overall Length #ad - 1/4 inch diameter solid carbide drill mill 1/4″ shank 3/4″ length of cut 2-1/2″ overall length 2 flute carbide, drill mill.

 

Micro 100 DM-250-490X 90° Included Point Angle Drill Mill 4 Flute AlTiN Coated Solid Carbide Tool 14 Cutter Diameter 14 Shank Diameter 34 Flute Length 25 Overall Length #ad

Micro 100 DM-250-490X 90° Included Point Angle Drill Mill, 4 Flute, AlTiN Coated, Solid Carbide Tool, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length

Micro 100 DM-250-490X 90° Included Point Angle Drill Mill, 4 Flute, AlTiN Coated, Solid Carbide Tool, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length #ad - Tools can be utilized for both roughing and finishing. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. The micro 100 dm-250-490x altin, aluminum titanium nitride coated, 4 flute, solid carbide, 90° included point angle, drill mill. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Altin coatings are best suited for alloy steels, stainless steels, tool steels, nickel alloys and titanium. Altin coatings are high performance and versatile. Has a higher breakdown temperature while maintaining high surface hardness at elevated temperatures. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. This type of coating also promotes tool life and allows for faster feeds and speeds. Applicable with oxidation temperatures up to 800° c or 1450° f. Manufactured with close tolerances to ensure ultimate precision and performance. Excellent for dry machining applications. Their substrate is in class of its own resulting from exclusive treating processes that allow increased speed and feed rates. Designed and engineered to perform both drilling and milling applications when applicable.

 

Melin Tool AMG-DP1 Carbide Drill Mill Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter #ad

Melin Tool AMG-DP1 Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG-DP1 Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter #ad - Can be used for drilling, slotting, chamfering, and profile milling. Available in 90 degree points. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Melin Tool AMG-M-M-DP Carbide Micro Drill Mill Metric Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 38mm Overall Length 1mm Cutting Diameter 3mm Shank Diameter #ad

Melin Tool AMG-M-M-DP Carbide Micro Drill Mill, Metric, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 38mm Overall Length, 1mm Cutting Diameter, 3mm Shank Diameter

Melin Tool AMG-M-M-DP Carbide Micro Drill Mill, Metric, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 38mm Overall Length, 1mm Cutting Diameter, 3mm Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Drill point end. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Can be used for drilling, slotting, chamfering, and profile milling. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Micro 100 DM-500-4120X 120° Included Point Angle Drill Mill 4 Flute AlTiN Coated Solid Carbide Tool 12 Cutter Diameter 12 Shank Diameter 1-14 Flute Length 3 Overall Length #ad

Micro 100 DM-500-4120X 120° Included Point Angle Drill Mill, 4 Flute, AlTiN Coated, Solid Carbide Tool, 1/2″ Cutter Diameter, 1/2″ Shank Diameter, 1-1/4″ Flute Length, 3″ Overall Length

Micro 100 DM-500-4120X 120° Included Point Angle Drill Mill, 4 Flute, AlTiN Coated, Solid Carbide Tool, 1/2″ Cutter Diameter, 1/2″ Shank Diameter, 1-1/4″ Flute Length, 3″ Overall Length #ad - Excellent for dry machining applications. This type of coating also promotes tool life and allows for faster feeds and speeds. Has a higher breakdown temperature while maintaining high surface hardness at elevated temperatures. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. The micro 100 dm-500-4120x altin, aluminum titanium nitride coated, 4 flute, solid carbide, 120° included point angle, drill mill. Designed and engineered to perform both drilling and milling applications when applicable. Applicable with oxidation temperatures up to 800° c or 1450° f. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Their substrate is in class of its own resulting from exclusive treating processes that allow increased speed and feed rates. Tools can be utilized for both roughing and finishing. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Altin coatings are high performance and versatile. Altin coatings are best suited for alloy steels, stainless steels, tool steels, nickel alloys and titanium. Manufactured with close tolerances to ensure ultimate precision and performance.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.