Best 25 Brass Steels

 

5 Pack Wire Cup Brush Rocaris Brass Steel Crimp Wheel Heavy Duty Wires Brushes for Metal Removal of Rust Corrosion Paint

5 Pack Wire Cup Brush, Rocaris Brass Steel Crimp Wheel Heavy Duty Wires Brushes for Metal, Removal of Rust Corrosion Paint

5 Pack Wire Cup Brush, Rocaris Brass Steel Crimp Wheel Heavy Duty Wires Brushes for Metal, Removal of Rust Corrosion Paint - The crimped wire brush perfectly works with most power drill or pneumatic air drills with max 4500 rpm. M14 thread for most 41/2″ and 9″ grinders. Dimension 25 inch, 3inch, 35inch, 4 inch, 5inch width. Ideal for cleaning and polishing steel, brass, and copper objects. Constructed with internal holding plate and oversize hexgonal thread with the cover between the thread and outer holding plate to ensure consistency and safety and balance which provides smooth performance.

 

Justech 40 Pieces Polish Wheels  300 Pieces Sanding Belt Sleeves  6 Pieces Drum Mandrels  36 Pieces Brass Steel Wire Wheel Brush Set for DIY Production Polishing Sanding Cleaning Descaling Manicure

Justech 40 Pieces Polish Wheels + 300 Pieces Sanding Belt Sleeves + 6 Pieces Drum Mandrels + 36 Pieces Brass Steel Wire Wheel Brush Set for DIY Production Polishing Sanding Cleaning Descaling Manicure

Justech 40 Pieces Polish Wheels + 300 Pieces Sanding Belt Sleeves + 6 Pieces Drum Mandrels + 36 Pieces Brass Steel Wire Wheel Brush Set for DIY Production Polishing Sanding Cleaning Descaling Manicure - 300 pieces of abrasive tape sleeves + 6 pieces drum mandrels abrasive sleeves in three different sizes, grit size 80, grit size 120, grain size 240 and diameter of 1/2, 3/8 and 1/4 inch length of 38, 40, and 42mm diameter (shaft) of 235 and 317 mm, each size has 2 pieces. Widely application common and standard size suitable for all rotating tools, fit for different angles of wood, metal materials, etc, polishing and sanding all types of rough surface. 18 months warranty back up they are just the tools that use without professional advising, if you are not satisfied with the items, feel free to contact us, we will try our best to solve your problem. 36 pieces brass steel wire wheel brush set 36 pieces set of full set brush set, mini size, can meet your different requirement, economical and practical, included 18pcs copper wire brushes and 18pcs steel wire brushes, made of high quality brass and steel material, eco-friendly, durable and sturdy to use. 40 pieces polishing wheels suitable for metal surface cleaning, derusting, grinding, dusting, deburring, polishing, remove residues, 25 cm with 80 grit/ 150 grit/ 240 grit/ 300 grit.

 

Grommet Pliers with Qty 100 316 Grommets of Brass Steel Copper

Grommet Pliers with Qty 100, 3/16″ Grommets of Brass, Steel, Copper

Grommet Pliers with Qty 100, 3/16″ Grommets of Brass, Steel, Copper - 5 3/4″ long, 3/4″ jaw opening. Grommet tool for use with 3/16″ (0187″) grommets. Chrome finish with padded handles. Includes total of 100 grommets of steel, copper, brass. Soft handle tool with swing mechanism to lock closed.

 

JWL 1 Cane Walking Stick Shift Knob Handle Ball Style Cast Brass with Steel Threaded Rod Connector

JWL (1) Cane Walking Stick Shift Knob Handle Ball Style Cast Brass with Steel Threaded Rod Connector

JWL (1) Cane Walking Stick Shift Knob Handle Ball Style Cast Brass with Steel Threaded Rod Connector - 2″ high by 1 1/2″ in diameter & 15/16″ where base meets the shaft. Lacquer coated at manufacturer to slow oxidation ( remove with lacquer thinner). Very strong cast brass material. 3/8″ x 16 steel threaded rod 2″ long connector to attach handle to cane shaft. Cast brass , 70% copper & 28% zinc & 2% nickel alloy.

 

Foster 3603  16-3 Industrial Interchange Air Fitting Quick-Connect Coupler and Plug 14 Coupling x 14 ID Hose Barb Solid Brass and Steel 37 CFM Flow Rating

Foster 3603 + 16-3 Industrial Interchange Air Fitting, Quick-Connect Coupler and Plug, 1/4″ Coupling x 1/4″ ID Hose Barb, Solid Brass and Steel 37 CFM Flow Rating

Foster 3603 + 16-3 Industrial Interchange Air Fitting, Quick-Connect Coupler and Plug, 1/4″ Coupling x 1/4″ ID Hose Barb, Solid Brass and Steel 37 CFM Flow Rating - This heavy-duty coupler and plug set works with 1/4″ body industrial interchange. Temperature range -40° to +250° f. Interchanges with i / m style, mil-c-4109f/a-a-59439, rated at 300 psi with 37 cfm flow rating.

 

Universal Tool 3pc Scratch Brush Set for Fiber Brass and Steel Texturing

Universal Tool 3pc Scratch Brush Set for Fiber Brass and Steel Texturing

Universal Tool 3pc Scratch Brush Set for Fiber Brass and Steel Texturing - Each brush is made of a different material (fiber, brass and steel respectively), allowing for diverse usability. The 3pc scratch brush set is a must have for any hobbyists and crafting enthusiasts. Every brush is also color coded for easy identification. The brushes are about 4″ long apiece, and they come in a plastic carrying case for storage when not in use. Make sure to grab this set before your next art project. This set comes with 3 brushes that are ideal for cleaning, texturing and more.

 

18 pcs BrassSteel Punch Set

18 pcs Brass/Steel Punch Set

18 pcs Brass/Steel Punch Set - Excellent for cleaning glass and glazed tile. Great for stripping paint removes oxidation. Cleans & shines metal w/ or without cleaning compound polishes s steel, brass, & chrome. Great for applying teak oil or wax to woodwork. Clean and polish glass or mirror with or without a liquid agent.

 

JWL HAWNKOA PRODUCTS 1 Cane Walking Stick Handle Smaller Fritz Style Cast Brass with Steel Threaded Rod Connector

JWL HAWNKOA PRODUCTS (1) Cane Walking Stick Handle Smaller Fritz Style Cast Brass with Steel Threaded Rod Connector

JWL HAWNKOA PRODUCTS (1) Cane Walking Stick Handle Smaller Fritz Style Cast Brass with Steel Threaded Rod Connector - 2 1/2″ from base to highest point of handle. 4 1/4″ long cast brass smaller fritz handle 7/8″ diameter for smaller hands. Makes a very strong cane, some woodworking experience needed, handle lacquered by manufacturer to retard oxidation (remove with lacquer thinner ). 3 1/2″ long 3/8″ x 16 steel threaded rod connector to attach handle to cane shaft included. Brass covered with lacquer to retard oxidation.

 

Starrett S565WBS Steel Brass Drive Pin Punch Set

Starrett S565WBS Steel & Brass Drive Pin Punch Set

Starrett S565WBS Steel & Brass Drive Pin Punch Set - Length (in) 4″ (mm) 100mm, material steel & brass, set quantity 8, sizes included 1/16″, 3/32″, 1/8″, 5/32″. The starrett 565 drive pin punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. Starrett s565wbs steel & brass drive pin punch set. Round plastic box included.

 

HEYMOUS Tube Cleaning Brushes Steel Brass Wire Bristles Cleaning Brushes Set for Bottle Pipe Welding Slag and Rust Remove Cleaner Tool Diameter 15mm 10 Pieces

HEYMOUS Tube Cleaning Brushes Steel Brass Wire Bristles Cleaning Brushes Set for Bottle Pipe Welding Slag and Rust Remove Cleaner Tool Diameter 15mm 10 Pieces

HEYMOUS Tube Cleaning Brushes Steel Brass Wire Bristles Cleaning Brushes Set for Bottle Pipe Welding Slag and Rust Remove Cleaner Tool Diameter 15mm 10 Pieces - Do a good job on hard to reach areas perfect for tubes, cylinders or narrow clean up requirements, great brushes for cleaning our cars’ parts. Flexible handle, so you can bend them around corners and get in tight spots, great for small spaces cleaning. Tube cleaning brush is designed to access and clean narrow curves and crevices. Brush diameter 15 mm brush length (with handle) 22 cm. Bristles are non-marring but stiff enough for tough resin residue,twisted wire handle with loop.

 

Blue Boar TCT Metal Pro 1-34 44mm Tungsten Carbide Hole Cutter Up to 316 Thick Stainless Steel Sheet Metal cast Iron Aluminum Copper Brass Steel Plate Fiberglass FRP

Blue Boar TCT Metal Pro 1-3/4″ (44mm) Tungsten Carbide Hole Cutter. Up to 3/16″ Thick Stainless Steel, Sheet Metal, cast Iron, Aluminum, Copper, Brass, Steel Plate, Fiberglass, FRP.

Blue Boar TCT Metal Pro 1-3/4″ (44mm) Tungsten Carbide Hole Cutter. Up to 3/16″ Thick Stainless Steel, Sheet Metal, cast Iron, Aluminum, Copper, Brass, Steel Plate, Fiberglass, FRP. - Cuts steel plate, stainless steel, cast iron, aluminum, copper, brass, fiberglass, hard composites. Cutting depth up to 3/16″ with integral safety collar to prevent over drilling. Multiple precision ground tungsten carbide teeth for long life and fast cutting. Removable pilot drill is standard ¼” diameter for easy replacement in the field. Includes 7/16″ arbor or use standard 5/8″-18 hole saw arbors extension, and quick release adapters.

 

Uniweld 70011 Lever Type Tube Bender for 12 Od Tubing of Soft Copper Aluminum Brass Steel Other Metal Tubing

Uniweld 70011 Lever Type Tube Bender for 1/2″ Od Tubing of Soft Copper, Aluminum, Brass, Steel & Other Metal Tubing

Uniweld 70011 Lever Type Tube Bender for 1/2″ Od Tubing of Soft Copper, Aluminum, Brass, Steel & Other Metal Tubing - Calibrated markings show angle of bend for smooth, short radius bends up to 180 degree. Bend radius 1 1/2in. Lubricate bender and tubing to reduce friction and not designed to bend electrical steel conduit. Wide hook grips tubing securely. Will accurately bend 1/2in od tubing of soft copper, aluminum, brass, steel and other metal tubing.

 

RemembranceWare Offering Plate Stainless Steel Brass

RemembranceWare Offering Plate: Stainless Steel (Brass)

RemembranceWare Offering Plate: Stainless Steel (Brass) - This inline valve has a standard port flow and 15″ female national pipe taper (npt) threads for connecting two male threaded pipe fittings going in the same direction. This ball valve is made of stainless steel 316 and has a plastic-covered lever handle for on/off manual control. Body & ball typefull port, low operation torque,temp range-60f to 450f. The valve is fitted with ptfe seals for maximizing corrosion resistance and lifespan of the ball valve. Nominal working pressure1000 wogmax 1000 psi for water, oil, gas fluid mediumfor use with liquids and gases.

 

Prime-Line Products E 2281 Passage Door Latch 932 in 516 in Square Drive Steel Brass Finish

Prime-Line Products E 2281 Passage Door Latch, 9/32 in. & 5/16 in. Square Drive, Steel, Brass Finish

Prime-Line Products E 2281 Passage Door Latch, 9/32 in. & 5/16 in. Square Drive, Steel, Brass Finish - Opening and a 5/16 in. It is used with antique and vintage door hardware and it features a 2-3/8 in. Note #1 the square drive on this latch has a 9/32 in. This latch is designed for indoor use only, and it functions with the use of a spring-loaded square drive spindle at a maximum width and height of 9/32 inches. The latch includes a latch strike and fasteners, but it does not include any of the following components and they must be purchased separately the door knobs, square spindle and rosettes. Opening, but it will not accommodate 5/16 in. Products like fix-it-all and bondo body filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. These passage door latches are constructed of steel and come in a brass plated finish. Installation tip #1 because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. Backset. (Approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Square spindles. Note #2 this item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. The maximum square spindle size that this latch will accommodate is 9/32 in. Installation tip #2 apply a small amount of loctite threadlocker 271 to the set screw threads in the event they are loosening – loctite purchased separately.

 

Gunpla 4 inch Wire Wheel Brush Twist Knot with 58-Inch-11 Threaded Arbor by-020-Inch Hardened Brass Steel Crimp Wheel Heavy Duty Wires Brushes for Metal Removal of Rust Corrosion Paint

Gunpla 4 inch Wire Wheel Brush Twist Knot with 5/8-Inch-11 Threaded Arbor by-.020-Inch Hardened Brass Steel Crimp Wheel Heavy Duty Wires Brushes for Metal, Removal of Rust Corrosion Paint

Gunpla 4 inch Wire Wheel Brush Twist Knot with 5/8-Inch-11 Threaded Arbor by-.020-Inch Hardened Brass Steel Crimp Wheel Heavy Duty Wires Brushes for Metal, Removal of Rust Corrosion Paint - Minimal risk of metal scratch as the fibers are well aligned and easily brushing action. Our crimped cup brushes offer great flexibility for large and flat surfaces. Gunpla cup crimped wire brushes are made of high quality hardened steel to enhance durability and performance. Features with our wire brush, easily and smoothly remove corrosion, paint and others. Our crimped wire cup brush is gentle on metal and made from top brass steel wire that reveal a soft, pliable and paint-ready surface. Less fatigue is expected with our wheel brush, especially when using an air drill as all the job is solely done by the crimped brush effortlessly. Providing superior flexibility, enjoy agreeable moments of work with our great quality crimped brush. Smoothness, flexibility, high performance are durability are the characteristics of our wire brush crimped. Gunpla wire brushes are safe and free from leading to accidents during work. They are ideal for the removal of rust, scale and paint.

 

Merrill MFG PGB100 0-100 PSI 18 Back Mount Pressure Gauge BrassSteel

Merrill MFG PGB100 0-100 PSI (1/8″) Back Mount Pressure Gauge, Brass/Steel

Merrill MFG PGB100 0-100 PSI (1/8″) Back Mount Pressure Gauge, Brass/Steel - Merrill mfg pgb100 0-100 psi (1/8″) back mount pressure gauge. Steel case. 0-100 psi (1/8″)back mount pressure gauge. Pressure gauges are suitable for water, air, steam, and other pressure applications that will not deteriorate brass alloys.

 

Merrill MFG PG100 0-100 PSI Pressure Gauge BrassSteel

Merrill MFG PG100 0-100 PSI Pressure Gauge, Brass/Steel

Merrill MFG PG100 0-100 PSI Pressure Gauge, Brass/Steel - Steel case. Merrill mfg pg100 0-100 psi pressure gauge. Pressure gauges are suitable for water, air, steam, and other pressure applications that will not deteriorate brass alloys. 0-100 psi plastic pressure gauge.

 

National Hardware N275-248 Extender S Hook 12 Lb 12 in L Steel Brass

National Hardware N275-248 Extender S Hook, 12 Lb, 12 in L, Steel, Brass

National Hardware N275-248 Extender S Hook, 12 Lb, 12 in L, Steel, Brass - Allows plant baskets or other items to be hung at a lower level than the supporting hook. Great for outdoor use. Use to hang plant baskets or bird houses. Metal construction ensures proper support. Safe working load 12 pounds. Available in multiple colors. Bracket for hanging plants, bird feeders and wind chimes. Great for outdoor use metal construction ensures proper support. Allows plant baskets or other items to be hung at a lower level than the supporting hook.

 

Alarm Lock LL1 Exit Door Alarm Steel Brass Stainless Steel Bronze

Alarm Lock LL1 Exit Door Alarm, Steel, Brass, Stainless Steel, Bronze

Alarm Lock LL1 Exit Door Alarm, Steel, Brass, Stainless Steel, Bronze - Optional ac power supply available. The alarm can be bypassed from inside or outside by the use of a key. Ll1 is an exit door alarm with a flashing strobe designed to deter the use of the secured door by sounding a twin action alarm when opened by unauthorized personnel. ) This durable surface mount unit is easily installed and is tamper-supervised with two separate tamper switches. (requires standard mortise cylinder not supplied. Its test button verifies battery.

 

HTS 102F6 8 Pc Brass Steel Pin Punch Set

HTS 102F6 8 Pc Brass & Steel Pin Punch Set

HTS 102F6 8 Pc Brass & Steel Pin Punch Set - Set includes a cylindrical plastic storage container. Diamond pattern knurled handles give excellent, consistent grip even with oily hands. Punches have an 8mm diameter & an approximately 25mm long head. Each punch is approximately 325″ / 83mm in length. Set includes 4 brass and 4 hardened steel punches 17mm, 25mm, 3mm, & 4mm.

 

Axageid Engineering Hammer and Punch Set with Brass Steel Plastic Punches BrassPolymer Hammer and Storage Case for Gunsmithing Maintenance

Axageid Engineering Hammer and Punch Set with Brass, Steel, Plastic Punches, Brass/Polymer Hammer and Storage Case for Gunsmithing Maintenance

Axageid Engineering Hammer and Punch Set with Brass, Steel, Plastic Punches, Brass/Polymer Hammer and Storage Case for Gunsmithing Maintenance - Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use. Comes with a convenient plastic molded storage case. Features brass, steel and nylon solid punches making it the ideal kit for your workbench. Warranty 90 days money-back and 6 month warranty, leave us message if you have any questions. Package includes 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″ and 5/16″ brass punches, 1/16″, 3/32″ steel punches, 15/64″, 3/8″ plastic punches,1/16″, 3/32″ hollow end starter punch, hammer.

 

PURPLE STAR HAMMER CO 12-Inch Rubber Mallet Hammer with 4 Interchangeable Heads - Brass Steel Nylon Plastic

PURPLE STAR HAMMER CO. 12-Inch Rubber Mallet Hammer with 4 Interchangeable Heads – Brass, Steel, Nylon, Plastic

PURPLE STAR HAMMER CO. 12-Inch Rubber Mallet Hammer with 4 Interchangeable Heads – Brass, Steel, Nylon, Plastic - Each head has a diameter of 15 inches, overall hammer length is 12 inches. Multi-head mallet, 4 heads, steel, nylon, soft plastic and brass. Each is interchangeable by screwing on and off the heads, very simple to use. Comfortable rubber grip that has grooves for grip, ergonomic design for ease of use. Great for flattening, use with metal, avoids scratches, for driving in nails.

 

Blue Boar TCT Metal Pro 1-38 35mm tungsten carbide hole cutter Up to 316 thick stainless steel sheet metal cast iron aluminum copper brass steel plate fiberglass FRP

Blue Boar TCT Metal Pro 1-3/8″ (35mm) tungsten carbide hole cutter. Up to 3/16″ thick stainless steel, sheet metal, cast iron, aluminum, copper, brass, steel plate, fiberglass, FRP.

Blue Boar TCT Metal Pro 1-3/8″ (35mm) tungsten carbide hole cutter. Up to 3/16″ thick stainless steel, sheet metal, cast iron, aluminum, copper, brass, steel plate, fiberglass, FRP. - Multiple precision ground tungsten carbide teeth for long life and fast cutting. Includes 7/16″ arbor or use standard 5/8″-18 hole saw arbors extension, and quick release adapters. Cuts steel plate, stainless steel, cast iron, aluminum, copper, brass, fiberglass, hard composites. Cutting depth up to 3/16″ with integral safety collar to prevent over drilling.

 

Speedaire 30E534 Coupler Body M NPT 12 BrassSteel

Speedaire, 30E534, Coupler Body, (M) NPT, 1/2, Brass/Steel

Speedaire, 30E534, Coupler Body, (M) NPT, 1/2, Brass/Steel - , (M)npt hose connection, body size 1/2 in. , Max. Quick coupler body, industrial interchange type, pipe size 1/2 in. Flow 65 cfm, brass/steel, max. Pressure 250 psi, buna-n seals, galvanized finish, temp. Range -40 degrees to 150 degrees f.

 

Wire Brush Set for Cleaning Welding Slag and Rust 9 Pcs 2 Brush Heads Clean Scratch BrushStainless SteelBrassNylon Curved Handle Masonry brush Wire bristle Scratch Brush

Wire Brush Set for Cleaning Welding Slag and Rust, 9 Pcs 2 Brush Heads Clean Scratch Brush(Stainless Steel,Brass,Nylon) Curved Handle Masonry brush Wire bristle Scratch Brush

Wire Brush Set for Cleaning Welding Slag and Rust, 9 Pcs 2 Brush Heads Clean Scratch Brush(Stainless Steel,Brass,Nylon) Curved Handle Masonry brush Wire bristle Scratch Brush - 【Professional & unique design】wire brush have 2 heads, 3 row brush and 1 row brush two brush heads for cleaning welding slag and rust the handle is evenly curved at the brush, which makes the user feel comfortable when using it and effectively reduce hand grip, making it easier to use. 【9 pcs wire brush set】package including 9 pcs two heads welding wire brush- 3 pcs stainless steel wire brush 3 pcs brass wire brush and 3 pcs nylon wire brush without damaging surfaces and vehicle interiors. 【Premium durable material】stainless steel, brass and nylon materials, trong and durable, can clean rust and not easy to break off they can completely remove the rust and details the handles are made of plastic and they are easy to hold and control. 【Wire brush cleaner detail】wire brushes for cleaning, the total length is 175cm/65″ the 3 row brush head length approx 37cm/145″, 1 row brush head length approx 24cm/094″. 【Multi- uses brush set】clean steel parts, machinery, unfinished metal parts, paint stains, special corrosion also be used to clean doors, windows, sliding doors, floor tiles, etc (brass bristles can be used to clean unfinished metal parts, paint stains, grease, etc stainless steel brush can be used to clean where it needs strong scrubbing).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.