Best 21 Stock Grounds

 

Precision Brand 039-30110 18″ x 3″ O-1 Oil Hardening Ground Flat Stock 18″ Length General Purpose tool Steel Pre-Ground to Close tolerances

Precision Brand 039-30110 1/8″ x 3″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances

Precision Brand 039-30110 1/8″ x 3″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances - Fully spheroid zed structure. It is ready for tool room use and has excellent toughness and machinability characteristics. An oil hardening tool steel that maintains high abrasion and wear resistance. An electric furnace melt tool steel. Pre-ground on all surfaces to close tolerances. Precision brand ground flat stock is made from general purpose tool steel. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts.

 

Precision Brand 039-30046 Oil Hardening Ground Flat Stock 116″ x 2″ O-1 18″ Length General Purpose Tool Steel Pre-Ground to Close Tolerances

Precision Brand 039-30046 Oil Hardening Ground Flat Stock, 1/16″ x 2″ O-1, 18″ Length, General Purpose Tool Steel, Pre-Ground to Close Tolerances

Precision Brand 039-30046 Oil Hardening Ground Flat Stock, 1/16″ x 2″ O-1, 18″ Length, General Purpose Tool Steel, Pre-Ground to Close Tolerances - An electric furnace melt tool steel. Pre-ground on all surfaces to close tolerances. Fully spheroid zed structure. Precision brand ground flat stock is made from general purpose tool steel. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts. An oil hardening tool steel that maintains high abrasion and wear resistance. It is ready for tool room use and has excellent toughness and machinability characteristics.

 

Precision Brand 039-30102 Oil Hardening Ground Flat Stock 18″ x 58″ O-1 18″ Length General Purpose Tool Steel Pre-Ground to Close Tolerances

Precision Brand 039-30102 Oil Hardening Ground Flat Stock, 1/8″ x 5/8″ O-1, 18″ Length, General Purpose Tool Steel, Pre-Ground to Close Tolerances

Precision Brand 039-30102 Oil Hardening Ground Flat Stock, 1/8″ x 5/8″ O-1, 18″ Length, General Purpose Tool Steel, Pre-Ground to Close Tolerances - An oil hardening tool steel that maintains high abrasion and wear resistance. It is ready for tool room use and has excellent toughness and machinability characteristics. Fully spheroid zed structure. Precision brand ground flat stock is made from general purpose tool steel. An electric furnace melt tool steel. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts. Pre-ground on all surfaces to close tolerances.

 

Oil Hardening Precision Ground Flat Stock - Size 116 X 1-12X18 Long

Oil Hardening Precision Ground Flat Stock – Size: 1/16 X 1-1/2X18″ Long

Oil Hardening Precision Ground Flat Stock – Size: 1/16 X 1-1/2X18″ Long - 90 chromium -. F for best results. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. Do not quench in water because this is an oil hardening steel. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. Full length identification, eliminates confusion with other steels. Machines freely, fully spheroidized, annealed. F and quenched in oil. F (blue) size all sizes temp 1450, 1500 deg. Deep hardening characteristics and fine grain structure. 20 tungsten -. Stock is dimensionally stable, use it for the most intricate work. 50 vanadium -. Quench oil rockwell c 63, 65. 50 manganese, 1. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended. F (straw) spring temper 750, 800 deg. Cutting tools 300, 350 deg. The following table may also be used as a guide depending on type of work. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. F (light straw) solid punches and dies 400, 450 deg. Temperature of the quenching oil should be 120, 140deg.

 

Precision Brand 039-30362 1″ x 1-12″ O-1 Oil Hardening Ground Flat Stock 18″ Length General Purpose tool Steel Pre-Ground to Close tolerances

Precision Brand 039-30362 1″ x 1-1/2″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances

Precision Brand 039-30362 1″ x 1-1/2″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances - Pre-ground on all surfaces to close tolerances. Precision brand ground flat stock is made from general purpose tool steel. An electric furnace melt tool steel. An oil hardening tool steel that maintains high abrasion and wear resistance. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts. It is ready for tool room use and has excellent toughness and machinability characteristics. Fully spheroid zed structure.

 

Oil Hardening Precision Ground Flat Stock - Size 18 X 2x18 Long

Oil Hardening Precision Ground Flat Stock – Size: 1/8 X 2×18″ Long

Oil Hardening Precision Ground Flat Stock – Size: 1/8 X 2×18″ Long - F (light straw) solid punches and dies 400, 450 deg. 20 tungsten -. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. Quench oil rockwell c 63, 65. 50 vanadium -. Deep hardening characteristics and fine grain structure. Full length identification, eliminates confusion with other steels. Machines freely, fully spheroidized, annealed. 90 chromium -. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. Stock is dimensionally stable, use it for the most intricate work. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended. F (blue) size all sizes temp 1450, 1500 deg. Cutting tools 300, 350 deg. F and quenched in oil. F for best results. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. The following table may also be used as a guide depending on type of work. F (straw) spring temper 750, 800 deg. Temperature of the quenching oil should be 120, 140deg. Do not quench in water because this is an oil hardening steel. 50 manganese, 1.

 

Precision Brand 039-30085 Oil Hardening Ground Flat Stock 764″ x 1-14″ O-1 18″ Length General Purpose Tool Steel Pre-Ground to Close Tolerances

Precision Brand 039-30085 Oil Hardening Ground Flat Stock, 7/64″ x 1-1/4″ O-1, 18″ Length, General Purpose Tool Steel, Pre-Ground to Close Tolerances

Precision Brand 039-30085 Oil Hardening Ground Flat Stock, 7/64″ x 1-1/4″ O-1, 18″ Length, General Purpose Tool Steel, Pre-Ground to Close Tolerances - An electric furnace melt tool steel. Precision brand ground flat stock is made from general purpose tool steel. Pre-ground on all surfaces to close tolerances. Fully spheroid zed structure. An oil hardening tool steel that maintains high abrasion and wear resistance. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts. It is ready for tool room use and has excellent toughness and machinability characteristics.

 

Precision Brand 039-30286 12″ x 1-12″ O-1 Oil Hardening Ground Flat Stock 18″ Length General Purpose tool Steel Pre-Ground to Close tolerances

Precision Brand 039-30286 1/2″ x 1-1/2″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances

Precision Brand 039-30286 1/2″ x 1-1/2″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances - An oil hardening tool steel that maintains high abrasion and wear resistance. Precision brand ground flat stock is made from general purpose tool steel. Fully spheroid zed structure. It is ready for tool room use and has excellent toughness and machinability characteristics. An electric furnace melt tool steel. Pre-ground on all surfaces to close tolerances. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts.

 

Tool Steel O1 Oil Hardening Flat Stock Ground 14 Thick 5-12 Width 18 Length

Tool Steel O1 (Oil Hardening) Flat Stock, Ground, 1/4″ Thick, 5-1/2″ Width, 18″ Length

Tool Steel O1 (Oil Hardening) Flat Stock, Ground, 1/4″ Thick, 5-1/2″ Width, 18″ Length - Formability indicates how easily the material can be permanently shaped. Tensile strength, used to indicate a material’s overall strength, is the peak stress it can withstand before it breaks. 6% and above). 3%), medium (0. The bar has been ground to achieve the precise shape and size. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. Carbon steels, which include most aisi-sae grades in the 1000 range, are classified by their level of carbon content as low (below 0. Some tool steels are designed to resist deformation when used in elevated temperatures. 3% to 0. The o1 tool steel rectangular bar has been precision ground, meets american society for testing and materials international astm a681 and society of automotive engineers sae j437 specifications, and has a standard tolerance. 6%) and high (0. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. It must be hardened in oil, which can be done at relatively low temperatures for good dimensional stability. The o1 tool steel grade has better machinability than a2 tool steel. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a cutting edge. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Alloy steels, which include aisi-sae grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance.

 

Oil Hardening Precision Ground Flat Stock - Size 532 X 6x18Long

Oil Hardening Precision Ground Flat Stock – Size: 5/32″ X 6×18″Long

Oil Hardening Precision Ground Flat Stock – Size: 5/32″ X 6×18″Long - Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. Stock is dimensionally stable, use it for the most intricate work. 50 vanadium -. F and quenched in oil. 90 chromium -. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended. F (light straw) solid punches and dies 400, 450 deg. Deep hardening characteristics and fine grain structure. The following table may also be used as a guide depending on type of work. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. 50 manganese, 1. F (straw) spring temper 750, 800 deg. Temperature of the quenching oil should be 120, 140deg. F (blue) size all sizes temp 1450, 1500 deg. Do not quench in water because this is an oil hardening steel. Quench oil rockwell c 63, 65. Full length identification, eliminates confusion with other steels. Machines freely, fully spheroidized, annealed. F for best results. 20 tungsten -. Cutting tools 300, 350 deg.

 

Oil Hardening Precision Ground Flat Stock - Size 116 X 12X18 Long 2 Pcs

Oil Hardening Precision Ground Flat Stock – Size: 1/16 X 1/2X18″ Long (2 Pcs.)

Oil Hardening Precision Ground Flat Stock – Size: 1/16 X 1/2X18″ Long (2 Pcs.) - Stock is dimensionally stable, use it for the most intricate work. 50 vanadium -. 50 manganese, 1. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. Quench oil rockwell c 63, 65. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended. Deep hardening characteristics and fine grain structure. F (blue) size all sizes temp 1450, 1500 deg. Cutting tools 300, 350 deg. Machines freely, fully spheroidized, annealed. Do not quench in water because this is an oil hardening steel. 20 tungsten -. F for best results. Full length identification, eliminates confusion with other steels. F and quenched in oil. The following table may also be used as a guide depending on type of work. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. F (light straw) solid punches and dies 400, 450 deg. F (straw) spring temper 750, 800 deg. Temperature of the quenching oil should be 120, 140deg. 90 chromium -.

 

Oil Hardening Precision Ground Flat Stock - Size 532 X 1-12x18Long

Oil Hardening Precision Ground Flat Stock – Size: 5/32″ X 1-1/2×18″Long

Oil Hardening Precision Ground Flat Stock – Size: 5/32″ X 1-1/2×18″Long - Cutting tools 300, 350 deg. F for best results. Temperature of the quenching oil should be 120, 140deg. 50 vanadium -. 90 chromium -. 20 tungsten -. F (light straw) solid punches and dies 400, 450 deg. F and quenched in oil. Machines freely, fully spheroidized, annealed. F (blue) size all sizes temp 1450, 1500 deg. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. 50 manganese, 1. Quench oil rockwell c 63, 65. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. F (straw) spring temper 750, 800 deg. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended. Stock is dimensionally stable, use it for the most intricate work. Do not quench in water because this is an oil hardening steel. Deep hardening characteristics and fine grain structure. Full length identification, eliminates confusion with other steels. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. The following table may also be used as a guide depending on type of work.

 

Oil Hardening Precision Ground Flat Stock - Size 532 X 1-34x18Long

Oil Hardening Precision Ground Flat Stock – Size: 5/32″ X 1-3/4×18″Long

Oil Hardening Precision Ground Flat Stock – Size: 5/32″ X 1-3/4×18″Long - 50 vanadium -. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. 50 manganese, 1. F (straw) spring temper 750, 800 deg. Quench oil rockwell c 63, 65. F for best results. Temperature of the quenching oil should be 120, 140deg. Stock is dimensionally stable, use it for the most intricate work. 90 chromium -. Deep hardening characteristics and fine grain structure. Full length identification, eliminates confusion with other steels. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. Machines freely, fully spheroidized, annealed. F and quenched in oil. F (blue) size all sizes temp 1450, 1500 deg. F (light straw) solid punches and dies 400, 450 deg. Do not quench in water because this is an oil hardening steel. Cutting tools 300, 350 deg. The following table may also be used as a guide depending on type of work. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. 20 tungsten -. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended.

 

Oil Hardening Precision Ground Flat Stock - Size 532 X 3-12x18Long

Oil Hardening Precision Ground Flat Stock – Size: 5/32″ X 3-1/2×18″Long

Oil Hardening Precision Ground Flat Stock – Size: 5/32″ X 3-1/2×18″Long - Machines freely, fully spheroidized, annealed. Cutting tools 300, 350 deg. Do not quench in water because this is an oil hardening steel. 50 vanadium -. F for best results. F (straw) spring temper 750, 800 deg. F (blue) size all sizes temp 1450, 1500 deg. Deep hardening characteristics and fine grain structure. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. F and quenched in oil. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. Full length identification, eliminates confusion with other steels. 90 chromium -. F (light straw) solid punches and dies 400, 450 deg. Quench oil rockwell c 63, 65. 20 tungsten -. Temperature of the quenching oil should be 120, 140deg. Stock is dimensionally stable, use it for the most intricate work. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. 50 manganese, 1. The following table may also be used as a guide depending on type of work. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended.

 

Oil Hardening Precision Ground Flat Stock - Size 316 X 1x18Long

Oil Hardening Precision Ground Flat Stock – Size: 3/16″ X 1×18″Long

Oil Hardening Precision Ground Flat Stock – Size: 3/16″ X 1×18″Long - Deep hardening characteristics and fine grain structure. 50 manganese, 1. F for best results. Stock is dimensionally stable, use it for the most intricate work. F (light straw) solid punches and dies 400, 450 deg. 20 tungsten -. 50 vanadium -. F (straw) spring temper 750, 800 deg. Full length identification, eliminates confusion with other steels. Quench oil rockwell c 63, 65. Temperature of the quenching oil should be 120, 140deg. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended. 90 chromium -. Do not quench in water because this is an oil hardening steel. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. Machines freely, fully spheroidized, annealed. F and quenched in oil. F (blue) size all sizes temp 1450, 1500 deg. The following table may also be used as a guide depending on type of work. Cutting tools 300, 350 deg. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -.

 

Precision Brand 039-30188 14″ x 2-12″ O-1 Oil Hardening Ground Flat Stock 18″ Length General Purpose tool Steel Pre-Ground to Close tolerances

Precision Brand 039-30188 1/4″ x 2-1/2″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances

Precision Brand 039-30188 1/4″ x 2-1/2″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances - An oil hardening tool steel that maintains high abrasion and wear resistance. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts. Precision brand ground flat stock is made from general purpose tool steel. An electric furnace melt tool steel. It is ready for tool room use and has excellent toughness and machinability characteristics. Pre-ground on all surfaces to close tolerances. Fully spheroid zed structure.

 

Precision Brand 039-30182 14″ x 34″ O-1 Oil Hardening Ground Flat Stock 18″ Length General Purpose tool Steel Pre-Ground to Close tolerances

Precision Brand 039-30182 1/4″ x 3/4″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances

Precision Brand 039-30182 1/4″ x 3/4″ O-1, Oil Hardening Ground Flat Stock, 18″ Length, General Purpose tool Steel, Pre-Ground to Close tolerances - It is ready for tool room use and has excellent toughness and machinability characteristics. Pre-ground on all surfaces to close tolerances. An electric furnace melt tool steel. An oil hardening tool steel that maintains high abrasion and wear resistance. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts. Precision brand ground flat stock is made from general purpose tool steel. Fully spheroid zed structure.

 

Oil Hardening Precision Ground Flat Stock - Size 14 X 1-12x18 Long

Oil Hardening Precision Ground Flat Stock – Size: 1/4″ X 1-1/2×18 “Long

Oil Hardening Precision Ground Flat Stock – Size: 1/4″ X 1-1/2×18 “Long - 50 manganese, 1. Quench oil rockwell c 63, 65. 20 tungsten -. 50 vanadium -. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. Machines freely, fully spheroidized, annealed. F (blue) size all sizes temp 1450, 1500 deg. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended. F and quenched in oil. Cutting tools 300, 350 deg. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. Full length identification, eliminates confusion with other steels. F (light straw) solid punches and dies 400, 450 deg. Deep hardening characteristics and fine grain structure. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. F (straw) spring temper 750, 800 deg. 90 chromium -. Temperature of the quenching oil should be 120, 140deg. Do not quench in water because this is an oil hardening steel. The following table may also be used as a guide depending on type of work. F for best results. Stock is dimensionally stable, use it for the most intricate work.

 

Precision Brand 039-30044 Oil Hardening Ground Flat Stock 116″ x 1-12″ O-1 18″ Length General Purpose Tool Steel Pre-Ground to Close Tolerances

Precision Brand 039-30044 Oil Hardening Ground Flat Stock, 1/16″ x 1-1/2″ O-1, 18″ Length, General Purpose Tool Steel, Pre-Ground to Close Tolerances

Precision Brand 039-30044 Oil Hardening Ground Flat Stock, 1/16″ x 1-1/2″ O-1, 18″ Length, General Purpose Tool Steel, Pre-Ground to Close Tolerances - An electric furnace melt tool steel. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts. Precision brand ground flat stock is made from general purpose tool steel. Pre-ground on all surfaces to close tolerances. An oil hardening tool steel that maintains high abrasion and wear resistance. Fully spheroid zed structure. It is ready for tool room use and has excellent toughness and machinability characteristics.

 

Oil Hardening Precision Ground Flat Stock - Size 316 X 1-34x18Long

Oil Hardening Precision Ground Flat Stock – Size: 3/16″ X 1-3/4×18″Long

Oil Hardening Precision Ground Flat Stock – Size: 3/16″ X 1-3/4×18″Long - Stock is dimensionally stable, use it for the most intricate work. 20 tungsten -. 50 manganese, 1. The following table may also be used as a guide depending on type of work. Deep hardening characteristics and fine grain structure. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. Temperature of the quenching oil should be 120, 140deg. F and quenched in oil. 50 vanadium -. F (light straw) solid punches and dies 400, 450 deg. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. Quench oil rockwell c 63, 65. Machines freely, fully spheroidized, annealed. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. 90 chromium -. Cutting tools 300, 350 deg. Do not quench in water because this is an oil hardening steel. Full length identification, eliminates confusion with other steels. F (straw) spring temper 750, 800 deg. F (blue) size all sizes temp 1450, 1500 deg. F for best results.

 

Oil Hardening Precision Ground Flat Stock - Size 14 X 1x18 Long

Oil Hardening Precision Ground Flat Stock – Size: 1/4″ X 1×18 “Long

Oil Hardening Precision Ground Flat Stock – Size: 1/4″ X 1×18 “Long - 50 manganese, 1. Full length identification, eliminates confusion with other steels. Temperature of the quenching oil should be 120, 140deg. F and quenched in oil. F (straw) spring temper 750, 800 deg. F for best results. Machines freely, fully spheroidized, annealed. Quench oil rockwell c 63, 65. 50 vanadium -. 20 tungsten -. F (blue) size all sizes temp 1450, 1500 deg. Use chart for selecting desired rockwell c hardness and corresponding tempering temperature. 90 chromium -. F (light straw) solid punches and dies 400, 450 deg. Do not quench in water because this is an oil hardening steel. Cutting tools 300, 350 deg. Tempering for maximum toughness, a tempering time of one hour at temperature is recommended. Specifications furnished in 18″ length, ground, straight and parallel nominal analysis (aisi 01) carbon -. The following table may also be used as a guide depending on type of work. Stock is dimensionally stable, use it for the most intricate work. 20 hardening it is recommended that stock be heated uniformly to 1450, 1500 deg. Deep hardening characteristics and fine grain structure.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.