Best 18 Sae Cs

 

681 Bell housing182-256TC SAE C

6.81″ Bell housing,182-256TC, SAE C

6.81″ Bell housing,182-256TC, SAE C - 06″ radial clearance (z)5″ pilot diameter (xak)5. 81″ cl6. Magnaloy’s horizontal mounts are also supplied with a pre-cast drain hole for residual fluids. 12″ 4 bolt diameter (xaj4)6. These mounts ensure a lightweight, high strength, precision mount for efficient assembly, quiet operation, accurate shaft alignment and complete coupling concealment. Specifications motor frame182tc-256tc pump flangesae c bolt configuration2 and 4 bolt mountinghorizonatal overall length (m)6. This unique feature aids in quick detection of leaky seals and other trouble areas. 38″ 2 bolt size (xbf2)5/8-11 4 bolt size (xbf4)5/8-11. A mount kit is included with every order which contains all the bolts and washers required to attach the pump and motor to the mount. 001″ 2 bolt diameter (xaj2)7.

 

Brand Hydraulics SDCF120OM18CF1 Directional 4-Way Valve 12 SAEC HandleOM18

Brand Hydraulics SDCF120OM18CF1 Directional 4-Way Valve #12 SAE/C Handle/OM18

Brand Hydraulics SDCF120OM18CF1 Directional 4-Way Valve #12 SAE/C Handle/OM18 - Brand hydraulics sdcf series 0, 18 gym 4-way directional control valve having no 12 sae inlet/outlet and no 10 sae work ports performs open metering/friction detent spool with cast iron body and has pressure rating of 3000 psi.

 

Woodruff Key 516x1 18 In SAE C PK25

Woodruff Key, 5/16×1 1/8 In, SAE C, PK25

Woodruff Key, 5/16×1 1/8 In, SAE C, PK25 - Price for each length tolerance +0000 to -0010″ rockwell hardness b90 finish plain material c-1035 steel item woodruff key type half moon tensile strength (psi) 72, 000 key size 5/16 x 1-1/8″ sae number c length 1125″ height 04690″ country of origin (subject to change) united states. Tapered socked heads provide easier access to nuts and bolts. Meets or exceeds ansi specifications. 6-point, beveled-nose sockets. Us free fast post.

 

Generic rive Sae an Impact Socket rive Sae an and Metric Master 14-inch 14-inch Drive Sae c Master Imp Triple Square Dr le Square Dr Set 48-Piece e Square Dr

Generic rive Sae an Impact Socket rive Sae an and Metric Master 1/4-inch 1/4-inch Drive Sae c Master Imp Triple Square Dr le Square Dr Set 48-Piece e Square Dr

Generic rive Sae an Impact Socket rive Sae an and Metric Master 1/4-inch 1/4-inch Drive Sae c Master Imp Triple Square Dr le Square Dr Set 48-Piece e Square Dr - This set contains 48 sae and metric-piece. Sockets are laser etched and roll stamped for lasting size recognition. Sockets are laser etched and roll stamped for lasting size recognition. Us free fast post. Forged from the finest chrome molybdenum alloy steel-the best choice for strength and durability.

 

7 Bell housing 182-256TC SAE C

7″ Bell housing, 182-256TC, SAE C

7″ Bell housing, 182-256TC, SAE C - 25″ radial clearance (z)5″ pilot diameter (xak)5. 001″ 2 bolt diameter (xaj2)7. 12″ 4 bolt diameter (xaj4)6. 38″ 2 bolt size (xbf2)5/8-11 4 bolt size (xbf4)5/8-11. Specifications motor frame182tc-256tc pump flangesae c bolt configuration2 and 4 bolt mountinghorizonatal overall length (m)7″ cl6. These mounts ensure a lightweight, high strength, precision mount for efficient assembly, quiet operation, accurate shaft alignment and complete coupling concealment. Magnaloy’s horizontal mounts are also supplied with a pre-cast drain hole for residual fluids. This unique feature aids in quick detection of leaky seals and other trouble areas. A mount kit is included with every order which contains all the bolts and washers required to attach the pump and motor to the mount.

 

CROSS Manufacturing 330091 60P061 RCASC Aluminum Hydraulic Gear Pump Right Hand Rotation SAE C Mounting Splined Shaft 615 Cu InRev Displacement Orange

CROSS Manufacturing 330091 60P061 RCASC Aluminum Hydraulic Gear Pump, Right Hand Rotation, SAE “C” Mounting, Splined Shaft, 6.15 Cu In/Rev Displacement, Orange

CROSS Manufacturing 330091 60P061 RCASC Aluminum Hydraulic Gear Pump, Right Hand Rotation, SAE “C” Mounting, Splined Shaft, 6.15 Cu In/Rev Displacement, Orange - Available in right hand rotation. 2-inches split flange inlet with 1-1/4-inches split flange outlet on single rotation pump. Cross manufacturing 60 series pump features advanced design concept which provide long life, reliable operation and high volumetric efficiency. 3600 rpm maximum continuous speed. 1-1/4-inches diameter shaft 14 tooth splined. 3000 psi maximum working pressure. Sae “c” 2 and 4 bolt combination mount, rated to 90 gpm. Pump may be chain, belt or direct driven by a gas engine or electric motor.

 

CROSS Manufacturing 330035 60P092 RCASC Aluminum Hydraulic Gear Pump Right Hand Rotation SAE C Mounting Splined Shaft 925 Cu InRev Displacement Orange

CROSS Manufacturing 330035 60P092 RCASC Aluminum Hydraulic Gear Pump, Right Hand Rotation, SAE “C” Mounting, Splined Shaft, 9.25 Cu In/Rev Displacement, Orange

CROSS Manufacturing 330035 60P092 RCASC Aluminum Hydraulic Gear Pump, Right Hand Rotation, SAE “C” Mounting, Splined Shaft, 9.25 Cu In/Rev Displacement, Orange - 1-1/4-inches diameter shaft 14 tooth splined. Pump may be chain, belt or direct driven by a gas engine or electric motor. Cross manufacturing 60 series pump features advanced design concept which provide long life, reliable operation and high volumetric efficiency. Sae “c” 2 and 4 bolt combination mount, rated to 90 gpm. 3600 rpm maximum continuous speed. 2-inches split flange inlet with 1-1/4-inches split flange outlet on single rotation pump. Available in right hand rotation. 3000 psi maximum working pressure.

 

CROSS Manufacturing 330106 60P081 LCCSC Aluminum Hydraulic Gear Pump Left Hand Rotation SAE C Mounting Keyed Shaft 815 Cu InRev Displacement Orange

CROSS Manufacturing 330106 60P081 LCCSC Aluminum Hydraulic Gear Pump, Left Hand Rotation, SAE “C” Mounting, Keyed Shaft, 8.15 Cu In/Rev Displacement, Orange

CROSS Manufacturing 330106 60P081 LCCSC Aluminum Hydraulic Gear Pump, Left Hand Rotation, SAE “C” Mounting, Keyed Shaft, 8.15 Cu In/Rev Displacement, Orange - 3000 psi maximum working pressure. Cross manufacturing 60 series pump features advanced design concept which provide long life, reliable operation and high volumetric efficiency. 2-inches split flange inlet with 1-1/4-inches split flange outlet on single rotation pump. 3600 rpm maximum continuous speed. Pump may be chain, belt or direct driven by a gas engine or electric motor. Available in left hand rotation. Sae “c” 2 and 4 bolt combination mount, rated to 90 gpm. 1-1/4-inches diameter shaft 14 tooth keyed.

 

CROSS Manufacturing 330092 60P071 LCASC Aluminum Hydraulic Gear Pump Left Hand Rotation SAE C Mounting Splined Shaft 715 Cu InRev Displacement Orange

CROSS Manufacturing 330092 60P071 LCASC Aluminum Hydraulic Gear Pump, Left Hand Rotation, SAE “C” Mounting, Splined Shaft, 7.15 Cu In/Rev Displacement, Orange

CROSS Manufacturing 330092 60P071 LCASC Aluminum Hydraulic Gear Pump, Left Hand Rotation, SAE “C” Mounting, Splined Shaft, 7.15 Cu In/Rev Displacement, Orange - Cross manufacturing 60 series pump features advanced design concept which provide long life, reliable operation and high volumetric efficiency. Pump may be chain, belt or direct driven by a gas engine or electric motor. 1-1/4-inches diameter shaft 14 tooth splined. 3600 rpm maximum continuous speed. Available in left hand rotation. 2-inches split flange inlet with 1-1/4-inches split flange outlet on single rotation pump. 3000 psi maximum working pressure. Sae “c” 2 and 4 bolt combination mount, rated to 90 gpm.

 

Brand Hydraulics AO120TM64CS Directional 4-Way Valve 12 SAEC Handle6 GPM

Brand Hydraulics AO120TM64CS Directional 4-Way Valve #12 SAE/C Handle/6 GPM

Brand Hydraulics AO120TM64CS Directional 4-Way Valve #12 SAE/C Handle/6 GPM - Brand hydraulics ao series 0, 6 gym 4-way directional control valve having no 12 sae inlet/outlet and no 10 sae work ports performs tandem metering/spring center spool with cast iron body and has pressure rating of 3000 psi.

 

CROSS Manufacturing 330111 60P071 LCCSC Aluminum Hydraulic Gear Pump Left Hand Rotation SAE C Mounting Keyed Shaft 715 Cu InRev Displacement Orange

CROSS Manufacturing 330111 60P071 LCCSC Aluminum Hydraulic Gear Pump, Left Hand Rotation, SAE “C” Mounting, Keyed Shaft, 7.15 Cu In/Rev Displacement, Orange

CROSS Manufacturing 330111 60P071 LCCSC Aluminum Hydraulic Gear Pump, Left Hand Rotation, SAE “C” Mounting, Keyed Shaft, 7.15 Cu In/Rev Displacement, Orange - Sae “c” 2 and 4 bolt combination mount, rated to 90 gpm. Pump may be chain, belt or direct driven by a gas engine or electric motor. Cross manufacturing 60 series pump features advanced design concept which provide long life, reliable operation and high volumetric efficiency. 3000 psi maximum working pressure. Available in left hand rotation. 3600 rpm maximum continuous speed. 2-inches split flange inlet with 1-1/4-inches split flange outlet on single rotation pump. 1-1/4-inches diameter shaft 14 tooth keyed.

 

Generic lack Impact Size 34 to 1 58 ack Impac Deep Sockets Set 10pc 1 Blac 10pc 1 Black Impact ts Set Size Tools SAE c Tools SAE Mechanic nic Tools SAE

Generic lack Impact Size 3/4″ to 1 5/8″ ack Impac Deep Sockets Set 10pc 1″ Blac 10pc 1″ Black Impact ts Set Size Tools SAE c Tools SAE Mechanic nic Tools SAE

Generic lack Impact Size 3/4″ to 1 5/8″ ack Impac Deep Sockets Set 10pc 1″ Blac 10pc 1″ Black Impact ts Set Size Tools SAE c Tools SAE Mechanic nic Tools SAE - Condition brand new product details features socket sizes 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-5/16″, 1-3/8″, 1-7/16″, 1-1/2″, 1-5/8″ tapered socked heads provide easier access to nuts and bolts 6-point, beveled-nose sockets meets or exceeds ansi specifications hole on socket locks on to drive tang drop forged, heat treated, chrome vanadium steel include metal case (case can get dent or crack during shipping case as is).

 

Brand Hydraulics AO120O4CS Directional 4-Way Valve 12 SAEC HandleOpen Center

Brand Hydraulics AO120O4CS Directional 4-Way Valve #12 SAE/C Handle/Open Center

Brand Hydraulics AO120O4CS Directional 4-Way Valve #12 SAE/C Handle/Open Center - Brand hydraulics ao series 4-way directional control valve having no 12 sae inlet/outlet and no 10 sae work ports performs open center/spring center spool with cast iron body and has pressure rating of 3000 psi.

 

CROSS Manufacturing 330090 60P061 LCASC Aluminum Hydraulic Gear Pump Left Hand Rotation SAE C Mounting Splined Shaft 615 Cu InRev Displacement Orange

CROSS Manufacturing 330090 60P061 LCASC Aluminum Hydraulic Gear Pump, Left Hand Rotation, SAE “C” Mounting, Splined Shaft, 6.15 Cu In/Rev Displacement, Orange

CROSS Manufacturing 330090 60P061 LCASC Aluminum Hydraulic Gear Pump, Left Hand Rotation, SAE “C” Mounting, Splined Shaft, 6.15 Cu In/Rev Displacement, Orange - Sae “c” 2 and 4 bolt combination mount, rated to 90 gpm. 3000 psi maximum working pressure. 3600 rpm maximum continuous speed. 1-1/4-inches diameter shaft 14 tooth splined. 2-inches split flange inlet with 1-1/4-inches split flange outlet on single rotation pump. Pump may be chain, belt or direct driven by a gas engine or electric motor. Available in left hand rotation. Cross manufacturing 60 series pump features advanced design concept which provide long life, reliable operation and high volumetric efficiency.

 

875 Bell housing 324-405TC SAE C

8.75″ Bell housing, 324-405TC, SAE C

8.75″ Bell housing, 324-405TC, SAE C - 75″ cl7. Specifications motor frame324tc-405tc pump flangesae c bolt configuration2 and 4 bolt mountinghorizontal overall length (m)8. A mount kit is included with every order which contains all the bolts and washers required to attach the pump and motor to the mount. 88″ radial clearance (z)7. Magnaloy’s horizontal mounts are also supplied with a pre-cast drain hole for residual fluids. 74″ pilot diameter (xak)5. This unique feature aids in quick detection of leaky seals and other trouble areas. These mounts ensure a lightweight, high strength, precision mount for efficient assembly, quiet operation, accurate shaft alignment and complete coupling concealment. 12″ 4 bolt diameter (xaj4)6. 001″ 2 bolt diameter (xaj2)7. 38″ 2 bolt size (xbf2)5/8-11 4 bolt size (xbf4)1/2-13.

 

CROSS Manufacturing 330100 60P051 RCCSC Aluminum Hydraulic Gear Pump Right Hand Rotation SAE C Mounting Keyed Shaft 515 Cu InRev Displacement Orange

CROSS Manufacturing 330100 60P051 RCCSC Aluminum Hydraulic Gear Pump, Right Hand Rotation, SAE “C” Mounting, Keyed Shaft, 5.15 Cu In/Rev Displacement, Orange

CROSS Manufacturing 330100 60P051 RCCSC Aluminum Hydraulic Gear Pump, Right Hand Rotation, SAE “C” Mounting, Keyed Shaft, 5.15 Cu In/Rev Displacement, Orange - Available in right hand rotation. Sae “c” 2 and 4 bolt combination mount, rated to 90 gpm. 1-1/4-inches diameter shaft 14 tooth keyed. 3600 rpm maximum continuous speed. Cross manufacturing 60 series pump features advanced design concept which provide long life, reliable operation and high volumetric efficiency. 2-inches split flange inlet with 1-1/4-inches split flange outlet on single rotation pump. 3000 psi maximum working pressure. Pump may be chain, belt or direct driven by a gas engine or electric motor.

 

Magnaloy M600A1412C Magnesium Magnaloy Premium Flexible Drive Coupling Hub Splined SAE C Clamp 30 Pressure Angle 1-14 Bore 14 Teeth 1224 Pitch Keyway

Magnaloy M600A1412C Magnesium Magnaloy Premium Flexible Drive Coupling, Hub, Splined, SAE C Clamp, 30 Pressure Angle, 1-1/4″ Bore, 14 Teeth, 12/24 Pitch, Keyway

Magnaloy M600A1412C Magnesium Magnaloy Premium Flexible Drive Coupling, Hub, Splined, SAE C Clamp, 30 Pressure Angle, 1-1/4″ Bore, 14 Teeth, 12/24 Pitch, Keyway - The clamp feature is suggested for all splined couplings, but is also available in smooth bored and keyed models. Developed to compensate for variations in spline formation methods and tolerances. Assures centering of the coupling and positive retention on the shaft. The clamp-type coupling utilizes the basic magnaloy coupling with the addition of the clamp feature.

 

Brand Hydraulics AO120O4CDWO Directional 4-Way Valve 12 SAEC HandleEl Switch

Brand Hydraulics AO120O4CDWO Directional 4-Way Valve #12 SAE/C Handle/El Switch

Brand Hydraulics AO120O4CDWO Directional 4-Way Valve #12 SAE/C Handle/El Switch - Brand hydraulics ao series 4-way directional control valve having no 12 sae inlet/outlet and no 10 sae work ports performs open center/normal open electric switch spool with cast iron body and has pressure rating of 3000 psi.