Best 17 Bevel Washers

 

50 Galvanized Malleable 58 Square Bevel Washers I-Beam Flange Wedge

(50) Galvanized Malleable 5/8 Square Bevel Washers I-Beam Flange Wedge

(50) Galvanized Malleable 5/8 Square Bevel Washers I-Beam Flange Wedge - They have a 11/16″ id, are 1-1/2″ square, and 0. These galvanized washers are for use with 5/8″ bolts. Lot of (50) malleable iron square bevel washers. 25″ thick across the center hole (standard 2 in 12 slope).

 

100 Galvanized Malleable 38 Square Bevel Washers I-Beam Flange Wedge

(100) Galvanized Malleable 3/8 Square Bevel Washers I-Beam Flange Wedge

(100) Galvanized Malleable 3/8 Square Bevel Washers I-Beam Flange Wedge - These galvanized washers are for use with 3/8″ bolts. 23″ thick across the center hole (standard 2 in 12 slope). They have a 7/16″ id, are 1-1/4″ square, and 0. Lot of (100) malleable iron square bevel washers.

 

200 Galvanized Malleable 14 Square Bevel Washers I-Beam Flange Wedge

(200) Galvanized Malleable 1/4 Square Bevel Washers I-Beam Flange Wedge

(200) Galvanized Malleable 1/4 Square Bevel Washers I-Beam Flange Wedge - Lot of (200) malleable iron square bevel washers. These galvanized washers are for use with 1/4″ bolts. They have a 9/32″ id, are 11/16″ square, and 0. 16″ thick across the center hole (standard 2 in 12 slope).

 

Bevel Washer 38 Pk600

Bevel Washer, 3/8, Pk600

Bevel Washer, 3/8, Pk600 - Rubber material. Price for each item square beveled washer application used for structural leveling width 1-1/4″ material malleable iron length 1-1/4″ inside dia 1-1/4″ finish plain meets/exceeds astm a47 thickness 0120 to 0340″ fits bolt sizes 3/8″ country of origin (subject to change) multiple. Rust and corrosion resistant.

 

50 Galvanized Malleable 34 Square Bevel Washers I-Beam Flange Wedge

(50) Galvanized Malleable 3/4 Square Bevel Washers I-Beam Flange Wedge

(50) Galvanized Malleable 3/4 Square Bevel Washers I-Beam Flange Wedge - 31″ thick across the center hole (standard 2 in 12 slope). Lot of (50) malleable iron square bevel washers. They have a 13/16″ id, are 1-1/2″ square, and 0. These galvanized washers are for use with 3/4″ bolts.

 

Bevel Washer Use with eyebolt to correct taper on I-beam structural applications Bolt Size34 1 Each

Bevel Washer, (Use with eyebolt to correct taper on I-beam & structural applications), Bolt Size=3/4 (1 Each)

Bevel Washer, (Use with eyebolt to correct taper on I-beam & structural applications), Bolt Size=3/4 (1 Each) - Price for each item square beveled washer application used for structural leveling length 1-3/4″ inside dia 15/16″ finish hot dipped galvanized rockwell hardness c26 to c45 meets/exceeds astm f436 thickness 0157 to 0468″ fits bolt sizes 7/8″ width 1-3/4″ material steel country of origin (subject to change) multiple. Price for each item square beveled washer application used for structural leveling width 1-1/4″ material malleable iron length 1-1/4″ inside dia 1-1/4″ finish plain meets/exceeds astm a47 thickness 0120 to 0340″ fits bolt sizes 3/8″ country of origin (subject to change) multiple. Rubber material.

 

uxcell 12mm Fitting Dia Carbon Steel Slot Section Square Bevel Washer 10pcs

uxcell 12mm Fitting Dia Carbon Steel Slot Section Square Bevel Washer 10pcs

uxcell 12mm Fitting Dia Carbon Steel Slot Section Square Bevel Washer 10pcs - Intended for the general use under the head of a bolt or nut. Carbon steel washer providing good strength, hardness and abrasion performance. Bevel washer can resist loosening through vibration. Suitable for 12mm diameter thread screws, widely used in slot section. Washers are normally used to distribute loads of threaded bolts, screws and nuts evenly as the fastener is tightened.

 

RIDGID RYOBI OEM 511599001 BEVEL WASHER IN GENUINE FACTORY PACKAGE

RIDGID RYOBI OEM 511599001 BEVEL WASHER IN GENUINE FACTORY PACKAGE

RIDGID RYOBI OEM 511599001 BEVEL WASHER IN GENUINE FACTORY PACKAGE - Factory genuine packaging. Ridgid ryobi genuine oem part. Oem part number 511599001.

 

Bevel Washer 78 Pk280

Bevel Washer, 7/8, Pk280

Bevel Washer, 7/8, Pk280 - Price for each item square beveled washer application used for structural leveling length 1-3/4″ inside dia 15/16″ finish hot dipped galvanized rockwell hardness c26 to c45 meets/exceeds astm f436 thickness 0157 to 0468″ fits bolt sizes 7/8″ width 1-3/4″ material steel country of origin (subject to change) multiple. Price for each item square beveled washer application used for structural leveling width 1-1/4″ material malleable iron length 1-1/4″ inside dia 1-1/4″ finish plain meets/exceeds astm a47 thickness 0120 to 0340″ fits bolt sizes 3/8″ country of origin (subject to change) multiple. Rubber material.

 

uxcell 5Pcs Stainless Steel 6mm Square Bevel Washer for Channel Steel

uxcell 5Pcs Stainless Steel 6mm Square Bevel Washer for Channel Steel

uxcell 5Pcs Stainless Steel 6mm Square Bevel Washer for Channel Steel - )Standard gb /t 853-1988. 2. Specificationproduct name bevel washerpackage content 5pcs x bevel washermain color silver tonematerial stainless steelweight 22ginner diameter 6mm / 0. 6mm / 0. 14 inch (min. 08 inch x 0. 63 inchwasher height 2 x 3. 4. Washers are normally used to distribute loads of threaded bolts, screws and nuts evenly as the fastener is tightened. 1. 5. 24 inchwasher width 16mm / 0. Suitable for screws or bolts with similar diameter. Max. Intended for the general use under the head of a bolt or nut. Stainless steel washer providing good resisitance in high temperature. Special used for channel steel. 3. Bevel washer can resist loosening through vibration.

 

DrillSpot 516 18-8 SS Bevel Washer Pack of 1000

DrillSpot 5/16″ 18-8 S/S Bevel Washer, Pack of 1000

DrillSpot 5/16″ 18-8 S/S Bevel Washer, Pack of 1000 - Square beveled washers are specially designed for shimming and leveling in structural applications. Use with american standard beams and channels that have 1 6 slope (the same taper as a standard i-beam). Stainless steel material.

 

uxcell Stainless Steel 14mm Square Bevel Washer for Channel Steel

uxcell Stainless Steel 14mm Square Bevel Washer for Channel Steel

uxcell Stainless Steel 14mm Square Bevel Washer for Channel Steel - 2 inchwasher height 2. 2mm / 0. Stainless steel washer providing good resisitance in high temperature. 55 inchwasher width 30mm / 1. 5. 1 inch x 0. 2. Intended for the general use under the head of a bolt or nut. Washers are normally used to distribute loads of threaded bolts, screws and nuts evenly as the fastener is tightened. 5 x 5. Bevel washer can resist loosening through vibration. 2 inch (min. 3. 1. 4. Specificationproduct name bevel washerpackage content 1 x bevel washermain color silver tonematerial stainless steelweight 22ginner diameter 14mm / 0. Max. )Standard gb /t 853-1988. Suitable for screws or bolts with similar diameter. Special used for channel steel.

 

Houseuse M6 Stainless Steel Slot Section Gasket Square Bevel Washer 10pcs

Houseuse M6 Stainless Steel Slot Section Gasket Square Bevel Washer 10pcs

Houseuse M6 Stainless Steel Slot Section Gasket Square Bevel Washer 10pcs - Stainless steel washer providing good resisitance in high temperature. Intended for the general use under the head of a bolt or nut. Suitable for m6 diameter thread screws, widely used in slot section. Washers are normally used to distribute loads of threaded bolts, screws and nuts evenly as the fastener is tightened. Bevel washer can resist loosening through vibration.

 

100 Galvanized Malleable 12 Square Bevel Washers I-Beam Flange Wedge

(100) Galvanized Malleable 1/2 Square Bevel Washers I-Beam Flange Wedge

(100) Galvanized Malleable 1/2 Square Bevel Washers I-Beam Flange Wedge - Lot of (100) malleable iron square bevel washers. They have a 9/16″ id, are 1-1/4″ square, and 0. These galvanized washers are for use with 1/2″ bolts. 23″ thick across the center hole (standard 2 in 12 slope).

 

50 Malleable 34 Square Bevel Washers I-Beam Flange Wedge

(50) Malleable 3/4 Square Bevel Washers I-Beam Flange Wedge

(50) Malleable 3/4 Square Bevel Washers I-Beam Flange Wedge - They have a 13/16″ id, are 1-1/2″ square, and 0. Lot of (50) malleable iron square bevel washers. 31″ thick across the center hole (standard 2 in 12 slope). These unplated washers are for use with 3/4″ bolts.

 

uxcell M8 Stainless Steel Industrial Square Locking Bevel Washer Silver Tone 10pcs

uxcell M8 Stainless Steel Industrial Square Locking Bevel Washer Silver Tone 10pcs

uxcell M8 Stainless Steel Industrial Square Locking Bevel Washer Silver Tone 10pcs -     Suitable for mounting electronics, machinery, car models, model aircraft and other supplies. The washers are equipped between nut and connecting surface, washers are normally equipped under nuts to avoid lossed,this is the most common type of fastening connections.

 

Houseuse M20 Stainless Steel Slot Section Square Bevel Washer

Houseuse M20 Stainless Steel Slot Section Square Bevel Washer

Houseuse M20 Stainless Steel Slot Section Square Bevel Washer - Bevel washer can resist loosening through vibration. Intended for the general use under the head of a bolt or nut. Stainless steel washer providing good resisitance in high temperature. Suitable for m20 diameter thread screws, widely used in slot section. Washers are normally used to distribute loads of threaded bolts, screws and nuts evenly as the fastener is tightened.