Best 15 Sae Flares

 

Eaton Weatherhead 40X4 Brass CA360 SAE 45 Degree Flare Cap 14 Tube OD Pack of 5

Eaton Weatherhead 40X4 Brass CA360 SAE 45 Degree Flare, Cap, 1/4″ Tube OD (Pack of 5)

Eaton Weatherhead 40X4 Brass CA360 SAE 45 Degree Flare, Cap, 1/4″ Tube OD (Pack of 5) - Operating temperature range of -65 to +250 degrees f (-53 to +121 degrees c). Cap fitting for closing the end of a male-threaded flare tube. Female 7/16-20 sae flare threads for use with 1/4″ od tubes. Ca360 brass for strength and resistance to corrosion.

 

Performance Tool W30430 SAE Flare Nut Wrench 4-Piece

Performance Tool W30430 SAE Flare Nut Wrench, 4-Piece

Performance Tool W30430 SAE Flare Nut Wrench, 4-Piece - Made of chrome vanadium steel and include a plastic wrench storage bar to hold the wrenches. These double-ended flare nut wrench sets are designed with an open end to work with brake lines, fuel lines, or any other plumbing- related lines. Includes sae sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, and 11/16-inch. Lifetime warranty. 4-piece sae flare nut wrench set.

 

Tompkins 5700-06-06 SAE Flare Fitting SAE 45 Swivel Union 58-18 x 58-18 Brass

Tompkins 5700-06-06 SAE Flare Fitting, SAE 45 Swivel Union, 5/8-18 x 5/8-18, Brass

Tompkins 5700-06-06 SAE Flare Fitting, SAE 45 Swivel Union, 5/8-18 x 5/8-18, Brass - Tompkins 5700-06-06 brass sae flare fitting, sae 45 swivel union, 5/8-18 x 5/8-18, fittings, sae 45 swivel union, size 5/8-18 x 5/8-18 brass sae flare fittings. Made in united states.

 

Trident Marine 502-3838 Hose Barb x Female SAE Swivel Flare Fitting Brass

Trident Marine 502-3838 Hose Barb x Female SAE Swivel Flare Fitting, Brass

Trident Marine 502-3838 Hose Barb x Female SAE Swivel Flare Fitting, Brass - 3/8″ hose barb x 3/8″ female swivel sae flare brass hose fitting.

 

Tompkins 42-03-03 SAE Flare Fitting SAE 45 Tube Union 38-24 x 38-24 Brass

Tompkins 42-03-03 SAE Flare Fitting, SAE 45 Tube Union, 3/8-24 x 3/8-24, Brass

Tompkins 42-03-03 SAE Flare Fitting, SAE 45 Tube Union, 3/8-24 x 3/8-24, Brass - Made in united states. Tompkins 42-03-03 brass sae flare fitting, sae 45 tube union, 3/8-24 x 3/8-24, fittings, sae 45 tube union, size 3/8-24 x 3/8-24 brass sae flare fittings.

 

Tompkins 44-08-08-06 SAE Flare Fitting SAE 45 Tube Union Tee 34-16 x 34-16 x 58-18 Brass

Tompkins 44-08-08-06 SAE Flare Fitting, SAE 45 Tube Union Tee, 3/4-16 x 3/4-16 x 5/8-18, Brass

Tompkins 44-08-08-06 SAE Flare Fitting, SAE 45 Tube Union Tee, 3/4-16 x 3/4-16 x 5/8-18, Brass - Made in united states. Tompkins 44-08-08-06 brass sae flare fitting, sae 45 tube union tee, 3/4-16 x 3/4-16 x 5/8-18, fittings, sae 45 tube union tee, size 3/4-16 x 3/4-16 x 5/8-18 brass sae flare fittings.

 

Parker Hannifin 303 Gold Label Steel Liquid Line Filter-Drier 38 Sae Flare Fitting 3 Shell Diameter 969 Length

Parker Hannifin 303 Gold Label Steel Liquid Line Filter-Drier, 3/8″ Sae Flare Fitting, 3″ Shell Diameter, 9.69″ Length

Parker Hannifin 303 Gold Label Steel Liquid Line Filter-Drier, 3/8″ Sae Flare Fitting, 3″ Shell Diameter, 9.69″ Length - 69″ length. Manufactured by parker hannifin corp. Made in united states. Unsurpassed moisture and acid capacities– maximum filtration capability for today’s systems, compatible with all commercially available refrigerants including r-410a, compatible with mineral oil, alkybenzene and poe lubricants, parker hannifin 303 gold label steel liquid line filter-drier, 3/8″ sae flare fitting, 3″ shell diameter, 9.

 

3-Piece SAE Flare Nut Wrench Set 38x716 12x916 58x1116

3-Piece SAE Flare Nut Wrench Set, 3/8″x7/16″, 1/2″x9/16″, 5/8″x11/16″

3-Piece SAE Flare Nut Wrench Set, 3/8″x7/16″, 1/2″x9/16″, 5/8″x11/16″ - A single clamp screw provides for easy clamping and removal of tubing, large feed screw handle for smooth turning with little effort. Produces 45 degree flares in soft copper, brass, aluminum and mild steel tubing. Pipe sizes for the flaring tool are 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″. Silver flaring bars are heat-treated for durability and secure grip on tubing. Recommended for soft materials such as copper and aluminum recommended by some mini split manufacturers for r-410a flare.

 

Apollo 4C10101 Bronze Carbonated Beverage Backflow Preventer 14 SAE Flare

Apollo 4C10101 Bronze Carbonated Beverage Backflow Preventer, 1/4″ SAE Flare

Apollo 4C10101 Bronze Carbonated Beverage Backflow Preventer, 1/4″ SAE Flare - When a valve is opened downstream (i. 7/16″-20 unf. The apollo cbbp series carbonated beverage backflow preventer (cbbp) is designed to prevent the contamination of the potable water supply due to backflow when installed on water distribution lines serving beverage dispensing equipment. All wetted areas of the device are non-toxic, corrosion resistant, and approved for use with potable water. The cbbp is suitable for supply pressures to 150 psig and water temperatures from 33/130 degrees f. Nitrile o-ring. Non-metallic body for corrosion resistance. During backflow conditions, the port vents gases and/or liquids. Nitrile/stainless steel downstream. E. The strainer insures debris does not enter the carbonator. The device consists of two independ- ently acting check valves biased to a normally closed position. A normally open atmospheric port is located between the check valves. Repairable check assemblies. Acetal end cap. Asse1022. Additionally, the cbbp is equipped with a 100 mesh integral strainer screen at the inlet. Pvc/stainless steel strainer. Epdm/stainless steel upstream check. Under static (non flowing) conditions, the check valves remain in the closed position. Csa certified to ansi/nsf-61. Under backflow conditions, the diaphragm seat on the first check lifts and permits flow through the atmospheric port located between the two check valves. Acetal valve body. A drink is delivered from the beverage dispensing unit), the check valves open and permit the flow of water. Steel/acetal check valve.

 

Tompkins 42-04-04 SAE Flare Fitting SAE 45 Tube Union 716-20 x 716-20 Brass

Tompkins 42-04-04 SAE Flare Fitting, SAE 45 Tube Union, 7/16-20 x 7/16-20, Brass

Tompkins 42-04-04 SAE Flare Fitting, SAE 45 Tube Union, 7/16-20 x 7/16-20, Brass - Made in united states. Tompkins 42-04-04 brass sae flare fitting, sae 45 tube union, 7/16-20 x 7/16-20, fittings, sae 45 tube union, size 7/16-20 x 7/16-20 brass sae flare fittings.

 

12 Inch 45-Degree SAE Flare Tube Union Brass - Pack of 2

1/2 Inch 45-Degree SAE Flare Tube Union Brass – Pack of 2

1/2 Inch 45-Degree SAE Flare Tube Union Brass – Pack of 2 - 81 inch | material ca360 brass | pressure rating upto 2000 psi | temperature rating -65 to 250 deg f | tube size 1/2 inch od. Connection compression | eaton part number 42 x 8 | fitting type sae 45-degree flare | hex size 3/4 inch | industry standard asa, asme & sae | item tube union | length 1.

 

Napa 4 PC SAE Flare Nut Wrench Set MADE IN USA

Napa 4 PC. SAE Flare Nut Wrench Set MADE IN USA

Napa 4 PC. SAE Flare Nut Wrench Set MADE IN USA - Jic flared construction for a stronger connection than soldered. Mechanical joint coupler for connecting pipes or tubing in a straight run. Fitting connects to tubing on both ends. Operating temperatures range from -425 to 1200 degrees f. Stainless steel for strength and resistance to scaling and corrosion.

 

PART NO LCL41414 Loc-Line 41414 14 SAE Flare Nut Adapter 14 ID System 4package

PART NO. LCL41414 Loc-Line 41414, 1/4″ SAE Flare Nut Adapter, 1/4″ ID System, 4/package

PART NO. LCL41414 Loc-Line 41414, 1/4″ SAE Flare Nut Adapter, 1/4″ ID System, 4/package - Loc-line was and still is the number one coolant delivery answer for machinists across the globe. Part no. Lcl41414 loc-line 41414, 1/4″ sae flare nut adapter, 1/4″ id system, 4/package. Loc-line® is the original modular hose system. Over the years, the adjustable hose concept has expanded way beyond its first task of coolant delivery. The design was simple and elegant. A ball and socket assembly with just enough friction to create a hose that offered unlimited positioning, full coolant flow, would not fatigue, stayed in position and could be customized to the job. Four hose diameters and a multitude of nozzles, fittings and accessories allow for customized solutions suitable for a wide variety of industrial and commercial applications.

 

Loc-Line Coolant Hose Component Black Acetal Copolymer 14 SAE Flare Nut Adapter 14 Hose ID Pack of 20

Loc-Line Coolant Hose Component, Black Acetal Copolymer, 1/4″ SAE Flare Nut Adapter, 1/4″ Hose ID (Pack of 20)

Loc-Line Coolant Hose Component, Black Acetal Copolymer, 1/4″ SAE Flare Nut Adapter, 1/4″ Hose ID (Pack of 20) - Material meets nsf/ansi standards 14, 51, and 61 for drinking (potable) water. Fitting connects to loc-line modular hose on one end and sae flared pipe on the other. Acetal copolymer plastic has a black color, resists corrosion and moisture, and can be used with acetone, alcohol, ethyl, greases, oils, commercial dish detergents, gasoline, lacquer solvents, and sodium hydroxide. Flare nut fitting has a threaded connector to replace flared copper tubing. Maximum operating temperature of 170 degrees f.

 

Dynamic Tools D010029 38 Drive SAE Flare Nut Socket Set 7 Piece 38 to 34

Dynamic Tools D010029 3/8″ Drive SAE Flare Nut Socket Set (7 Piece), 3/8″ to 3/4″

Dynamic Tools D010029 3/8″ Drive SAE Flare Nut Socket Set (7 Piece), 3/8″ to 3/4″ - The line consists of more than 1,600 products, including toolboxes, sockets, wrenches, pliers, hammers, chisels, locking tools and clamps. The research inspired tools feature large, visible size markings, comfort grip handles throughout and a highly distinctive color scheme making tools easy to find in any toolbox. Most dynamic tools are backed by a lifetime warranty. Dynamic tools address the needs of the industrial user looking for quality tools that fit the budget.