25 Top Countersink Bit Drills

 

Baoblaze Drill Bits Hex Chamfer Wood Drill Bits Countersink Bit Set 6 - 19mm Hole

Baoblaze Drill Bits Hex Chamfer Wood Drill Bits Countersink Bit Set 6 – 19mm Hole

Baoblaze Drill Bits Hex Chamfer Wood Drill Bits Countersink Bit Set 6 – 19mm Hole - The bits can be used on wood, plastic, aluminium, insulating plate and pvc board, etc. Commonly used sizes including 6mm ,8mm, 9mm, 12mm, 16mm & 19mm. Titanium nitride coated bits last longer than regular steel countersink bits. 4241 hss steel only suit for pieces with low hardness, do not use for metal with this bits. Made from high quality hss steel, with the titanium coated to reduce friction and heat.

 

Jesica Tapered Drill Countersink Bit Screw Pilot Hole For Wood

Jesica Tapered Drill Countersink Bit Screw Pilot Hole For Wood

Jesica Tapered Drill Countersink Bit Screw Pilot Hole For Wood - Adjustable counter sleeve depth with wrench. Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew. Drill and countersink for wood screws without changing bits. Suitable for drilling machines with chucks or adapters and drilling in hard wood and wood layer, machine screw wood screw. Special designed steel counter sleeve countersinks or counter bores pilot hole.

 

Ginode 6 Pcs 14 Hex Shank HSS 5 Flute Countersink Drill Bit Set 90 Degree For Wood Quick Change Bit 6mm  8mm  9mm  12mm  16mm  19mm

Ginode 6 Pcs 1/4” Hex Shank HSS 5 Flute Countersink Drill Bit Set 90 Degree For Wood Quick Change Bit 6mm / 8mm / 9mm / 12mm / 16mm / 19mm

Ginode 6 Pcs 1/4” Hex Shank HSS 5 Flute Countersink Drill Bit Set 90 Degree For Wood Quick Change Bit 6mm / 8mm / 9mm / 12mm / 16mm / 19mm - ▲Mainly used for wood openings, reaming, chamfering, screw head, applies to mdf, plywood, acrylic, pvc board and soft metal such as aluminum, copper and so on. ▲Great for sinking 90 degree holes into wood and soft metals countersunk screws and fixings. ▲Using high frequency quenching for heat treatment, high-density grinding, with titanium to prevent rust. ▲High carbon steel material with titanium plating surface treatment, hardened cutting edg and honed sharpness. ▲size includes, 6mm(1/4”), 8mm(5/16”), 9mm(3/8”), 12mm(1/2”), 16mm(5/8”), 19mm(3/4”), handle diameter 1/4 inch.

 

Jili Online 6 piece 90 Degree Flute Chamfer Countersink Drill Bit Hex Shank Wood Cutter

Jili Online 6 piece 90 Degree Flute Chamfer Countersink Drill Bit Hex Shank Wood Cutter

Jili Online 6 piece 90 Degree Flute Chamfer Countersink Drill Bit Hex Shank Wood Cutter - 4mm 12. 4mm x 10mm x 46mm, 16. 3mm/ 8. 5mm 16. Description, made from high quality carbide, with the titanium coated to reduce friction and heatx, 90° three edge chamfering cutter, flutes three edge chamfering, shank round handle, dimension 6. 5mm x 10mm x 47mm, 20. 3mm 8. Mm x 10mm x 47mmpackage includes1x set (6 pieces) chamfer cutter mill drillnotethe colors may be different for the different display, please understandplease allow 1-3mm error due to manual measurement, make sure you do not mind before you bid. 5mm 20. 4mm 10. 4mm / 16. 3mm x 6mm x 40mm, 10. 3mm 6. 4mm / 12. 3mm /10. 3mm x 5mm x 37mm, 8. 4mm x 6mm x 39mm, 12. 5mm / 20. 5mmspecification, 6.

 

DEWALT DW2569 Style10 Countersink with 316-Inch Drill Bit

DEWALT DW2569 Style#10 Countersink with 3/16-Inch Drill Bit

DEWALT DW2569 Style#10 Countersink with 3/16-Inch Drill Bit - Drill, countersink and counterbore in one step. Replacement tapered bits offered. Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.

 

KING DO WAY 4pcs HSS 5 Flute Countersink Drill Bit Set Reamer Woodworking Chamfer 3mm-6mm

KING DO WAY 4pcs HSS 5 Flute Countersink Drill Bit Set Reamer Woodworking Chamfer 3mm-6mm

KING DO WAY 4pcs HSS 5 Flute Countersink Drill Bit Set Reamer Woodworking Chamfer 3mm-6mm - Chamfer is 5 flutes,in the process of using, can discharge the wood more rapid, sink hole disposable drilled smooth, screw cap perfect embedded in the surface of workpiece. Adjustable counter sleeve depth with wrench. Four piece set includes bits for drilling pilot holes for screw sizes 3mm, 4mm, 5mm, 6mm. Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew. Special designed steel counter sleeve countersinks or counter bores pilot hole.

 

Eachbid 5Pcs Industrial Countersink Drill Bit Set Tri-Flat Shank Quick Change 14-34 Kit Tool

Eachbid 5Pcs Industrial Countersink Drill Bit Set Tri-Flat Shank Quick Change 1/4″-3/4″ Kit Tool

Eachbid 5Pcs Industrial Countersink Drill Bit Set Tri-Flat Shank Quick Change 1/4″-3/4″ Kit Tool - 95cm, 1. 59cm, 1. Specification this 5pcs tri-flat shank quick change bit set can be used for industrial countersink drill high quality m2 steel construction 5 flutes and 82 degree point angle 1/4″ tri-flat shank for easy grip 1/4″ shank fits most common power drills quickly and easily cuts soft metal, wood, rubber, plastic there are 5 dimensions for you 1/4″, 3/8″, 1/2″, 5/8″, 3/4″(approx 0.   Package included 1 x 5pcs countersink drill bit with box no retail box. Please allow 1-2mm differs due to manual measurement,thanks. 64cm, 0. 91cm) this product comes with a storage case color as pictures show   note there could be some slight differences in the color tone of the pictures and the actual item. Packed safely in bubble bag. 27cm, 1.

 

6Pcs Hex Shank HSS 4341 Combination Drill and Tap Bit Set Drill Bit Screw Tap Deburr Countersink Bit 6-32NC 8-32 NC 10-32 NC 10-24 NC 12-24 NC 14-20 NC Set of 6 Silver HSS 4341

6Pcs Hex Shank HSS 4341 Combination Drill and Tap Bit Set Drill Bit & Screw Tap Deburr Countersink Bit 6-32NC 8-32 NC 10-32 NC 10-24 NC 12-24 NC 1/4-20 NC, Set of 6 (Silver HSS 4341)

6Pcs Hex Shank HSS 4341 Combination Drill and Tap Bit Set Drill Bit & Screw Tap Deburr Countersink Bit 6-32NC 8-32 NC 10-32 NC 10-24 NC 12-24 NC 1/4-20 NC, Set of 6 (Silver HSS 4341) - Self-centering point, do not need assistant center drilling or center punching. 100% brand new and high quality high hardness, rustproof, solid and durable. Back tapered beyond tap to prevent thread damage from over-drilling. Fast replacement composite cone, uses drill edged principle. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time.

 

Gimiton 3 Pcs 14 Hex Countersink 5 Flute 90 Degree Chamfering Countersink Drill Bit Set for Wood Metal Quick Change Drill Bit Set 121619mm size

Gimiton 3 Pcs 1/4” Hex Countersink 5 Flute 90 Degree Chamfering Countersink Drill Bit Set for Wood Metal Quick Change Drill Bit Set 12/16/19mm size

Gimiton 3 Pcs 1/4” Hex Countersink 5 Flute 90 Degree Chamfering Countersink Drill Bit Set for Wood Metal Quick Change Drill Bit Set 12/16/19mm size - Facilitate fast changing with a 1/4″ quick chuck system suitable for all woods and soft metals. Made of high carbon steel material with frequent quenching treatment, high hardness, sharp and smooth blade, magnetic shank. 1/4 inch quick change hex shank, five-blade chamfering with a groove, 90°angle on the point for sharp and precise countersinking. Size 12mm(1/2”), 16mm(5/8”), 19mm(3/4”), shank diameter 635mm (1/4 inch hex shank), angle 90 degree. Great for sinking 90 degree holes into wood and soft metals countersunk screws and fixings.

 

Fenteer 6PCS 3 FLUTE HSS TITANIUM CHAMFER END MILL CUTTER DRILL BIT COUNTERSINK SET

Fenteer 6PCS 3 FLUTE HSS TITANIUM CHAMFER END MILL CUTTER DRILL BIT COUNTERSINK SET

Fenteer 6PCS 3 FLUTE HSS TITANIUM CHAMFER END MILL CUTTER DRILL BIT COUNTERSINK SET - 3mm x 5mm x 37mm, 8. 4mm x 6mm x 39mm, 12. 3mm/ 8. 3mm 6. 3mm /10. 4mm 12. Description, made from high quality carbide, with the titanium coated to reduce friction and heatx, 90° three edge chamfering cutter, flutes three edge chamfering, shank round handle, dimension 6. 4mm / 16. 5mm x 10mm x 47mm, 20. 5mm / 20. 5mm 20. 4mm 10. 3mm x 6mm x 40mm, 10. Mm x 10mm x 47mmpackage includes1x set (6 pieces) chamfer cutter mill drillnotethe colors may be different for the different display, please understandplease allow 1-3mm error due to manual measurement, make sure you do not mind before you bid. 4mm / 12. 4mm x 10mm x 46mm, 16. 3mm 8. 5mmspecification, 6. 5mm 16.

 

SODIALR 4pcs Countersink Bits Deburring Tool Chamfer Drill for Metal Wood Plastic Cut Tool

SODIAL(R) 4pcs Countersink Bits Deburring Tool Chamfer Drill for Metal Wood Plastic Cut Tool

SODIAL(R) 4pcs Countersink Bits Deburring Tool Chamfer Drill for Metal Wood Plastic Cut Tool - Size(four type) 2-5mm/008-020 inch,5-10mm/020-039 inch, 10-15 mm/039-059 inch, 15-20mm/039-079 inch. Hands down 4 piece countersink and deburring tool set is perfect for cutting through metal, wood and plastic quickly and easily. Material high speed steel 4241. Used for workpiece circular aperture chamfering or cone hole, the edges on the surface of the chamfering processing. Scope suitable for using in hardness under 25 artifacts, such as aluminum, insulation board, pvc board.

 

Migiwata SAE HSS 3 in 1 Combination Drill Tap and Countersink Bits with Spiral Flute and 14” Hex Shank Set of 6pcs for Screw Threading on Plastic Wood Aluminum Sheet Iron

Migiwata SAE HSS 3 in 1 Combination Drill Tap and Countersink Bits with Spiral Flute and 1/4” Hex Shank Set of 6pcs for Screw Threading on Plastic Wood Aluminum Sheet Iron

Migiwata SAE HSS 3 in 1 Combination Drill Tap and Countersink Bits with Spiral Flute and 1/4” Hex Shank Set of 6pcs for Screw Threading on Plastic Wood Aluminum Sheet Iron - Three functions in one bit, drilling, tapping and countersinking can be done in a single pass to save your labor and precious time. Spiral flute, wide spiral flutes carry the chips out of the hole can be used on multi-spindle heads with reversing mechanisms for tapping in most materials. High speed steel, made of high quality 4341 hss for durability suitable for tapping on wood, plank, aluminum plate and sheet iron etc. Self-centering, 135-degree x shaped drill point is self-centering and eliminates the need for center drilling or center punching. 6 pcs in reusable case, reusable plastic case package includes 6 pcs of sae bits (6-32nc, 8-32 nc, 10-32 nc, 10-24nc, 12-24nc, 1/4-20nc) to meet your diversified requirements quick change 1/4″ (635mm) hex shank with sae sizes engraved on the shanks.

 

Yakamoz 82 Degree HSS 5 Flute Countersink Drill Bit Set 14 Hex Shank for Wood Quick Change Bit

Yakamoz 82 Degree HSS 5 Flute Countersink Drill Bit Set 1/4” Hex Shank for Wood Quick Change Bit

Yakamoz 82 Degree HSS 5 Flute Countersink Drill Bit Set 1/4” Hex Shank for Wood Quick Change Bit - These flute countersink drill bit set are machined from high speed steels and are available in 6 different diameter sizes size, 6mm(1/4”), 8mm(5/16”), 9mm(3/8”), 12mm(1/2”), 16mm(5/8”), 19mm(3/4”). All have a 82° angle on the point for sharp and precise countersinking the cutting edge is hardened and honed for sharpness a chatter-free,five-flute designed with staggered cutting teeth aranged to insure free chip flow and rapid chatter free cutting. Great for sinking 82 degree holes into wood and soft metals countersunk screws and fixingssuitable for diy, home and general building/engineering using. 1/4″ hex shank countersinks are fine for a quick drill they don’t slip in drill chucks you can make deep countersinks easily by setting the countersink’s depth stop to allow the countersink to drill more deeply into the worksurface be sure to measure the size of your plug to be sure your countersink’s body will make the right-size hole. Ideal for wooden planks,fiberboard,particle board,plywood,plastic,alumiumn board ,pcb board and more.

 

Countersink Drill Bit,4inLoveMe 6mm-19mm 14 Hex Shank HSS 5 Flute Countersink Titanium Coated Drill Bit Tool Set for Wood Quick Change Bit -6PCS

Countersink Drill Bit,4inLoveMe 6mm-19mm 1/4″ Hex Shank HSS 5 Flute Countersink Titanium Coated Drill Bit Tool Set for Wood Quick Change Bit -6PCS

Countersink Drill Bit,4inLoveMe 6mm-19mm 1/4″ Hex Shank HSS 5 Flute Countersink Titanium Coated Drill Bit Tool Set for Wood Quick Change Bit -6PCS - Great for sinking 90 degree holes into wood and soft metals countersunk screws and fixings. With standard high speed steel and super hard titanium coated bits, these countersinks perform great in even the toughest materials. Suitable for diy, home and general building/engineering using. Ideal for wooden planks,fiberboard,particle board,plywood,plastic,alumiumn board ,etc. Material, high speed steels size, 6mm(1/4”), 8mm(5/16”), 9mm(3/8”), 12mm(1/2”), 16mm(5/8”), 19mm(3/4”).

 

Gimiton 5Pcs 5 6 8 10 12 HSS Countersink Drill Bit Set with Quick Change Hex Shank Screw

Gimiton 5Pcs #5 #6 #8 #10 #12 HSS Countersink Drill Bit Set with Quick Change Hex Shank Screw

Gimiton 5Pcs #5 #6 #8 #10 #12 HSS Countersink Drill Bit Set with Quick Change Hex Shank Screw - Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew. Standard 1/4″ diameter hex shank is quick change compatible. Adjustable counter sleeve depth with a wrench. 5 piece set includes bits set for drilling pilot holes for screw sizes #5, #6, #8, #10, #12. Hss material, suitable for hardness below 25hrc such as carbon steel, thin plate, insulation board, pvc board, wood,etc.

 

Gimiton 5PCS Single Flute Countersink Drill Bit 90 Degree Edge Chamfer Set 14 to 34 - 6mm 10mm 13mm 16mm 19mm for Wood Quick Change Drill Bit Set

Gimiton 5PCS Single Flute Countersink Drill Bit 90 Degree Edge Chamfer Set 1/4″ to 3/4″ – 6mm 10mm 13mm 16mm 19mm for Wood Quick Change Drill Bit Set

Gimiton 5PCS Single Flute Countersink Drill Bit 90 Degree Edge Chamfer Set 1/4″ to 3/4″ – 6mm 10mm 13mm 16mm 19mm for Wood Quick Change Drill Bit Set - 90 degree metric 6mm-19mm single flute edge chamfer countersink drill bit. Size 6mm/ 10mm/ 13mm/ 16mm/ 19mm, ground form carbon steel with hardened edges for longer service life. Suitable for low hardness of the workpiece, such as wood, use for home and industrial. Made of high carbon steel material with titanize coated surface treatment. Cutting edges can better chip evacuation, not easy to blunt during usage.

 

Flameer Hex Shank Drill Bits Wood Drill Bits Drilling Tool Countersink Bit 6 Pieces

Flameer Hex Shank Drill Bits Wood Drill Bits Drilling Tool Countersink Bit 6 Pieces

Flameer Hex Shank Drill Bits Wood Drill Bits Drilling Tool Countersink Bit 6 Pieces - Made from high quality hss steel, with the titanium coated to reduce friction and heat. 4241 hss steel only suit for pieces with low hardness, do not use for metal with this bits. Commonly used sizes including 6mm ,8mm, 9mm, 12mm, 16mm & 19mm. The bits can be used on wood, plastic, aluminium, insulating plate and pvc board, etc. Titanium nitride coated bits last longer than regular steel countersink bits.

 

Promisy 5Pcs Lathe Mill Center Drill COUNTERSINK Bits Drill Bits Tools Set

Promisy 5Pcs Lathe Mill Center Drill COUNTERSINK Bits Drill Bits Tools Set

Promisy 5Pcs Lathe Mill Center Drill COUNTERSINK Bits Drill Bits Tools Set - Top quality m2 hss. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Sizes 1, 2, 3, 4 and 5, 60-degree tip angles. 100% new brand industrial quality.

 

Star M 8 Countersink Drill Bit Taper Drill Bit Adjustable Depth Stop 325 Long 00780

Star M #8 Countersink Drill Bit, Taper Drill Bit, Adjustable Depth Stop, 3.25″ Long, 00780

Star M #8 Countersink Drill Bit, Taper Drill Bit, Adjustable Depth Stop, 3.25″ Long, 00780 - 25″. Star m, located in miki, japan, has specialized in the production of drill bits for the woodworking industry since 1923. This bit is designed to allow drilling of the countersink and counterbore in one operation. Countersink and bit are made from high carbon steel that is fully induction hardened for long life. Elongated cutting flutes on countersink allows for fast and clean chip clearance. While the factory is highly mechanized, many of the operations are still performed by hand by skilled workers. Drill size is 11/64. 375. Overall length is 3. Comes with adjustable countersink depth stop. This is a #8 countersink bit. Countersink is machined to close tolerances with overall diameter of 0. Comes with allen wrench. Tapered drill bit allows for optimal grip of tapered screws threads.

 

Homyl 6xTitanium Coated Countersink Drill Bit Set Wood Screw 6 8 9 12 16 19mm Hole

Homyl 6xTitanium Coated Countersink Drill Bit Set Wood Screw 6 8 9 12 16 19mm Hole

Homyl 6xTitanium Coated Countersink Drill Bit Set Wood Screw 6 8 9 12 16 19mm Hole - 4241 hss steel only suit for pieces with low hardness, do not use for metal with this bits. Commonly used sizes including 6mm ,8mm, 9mm, 12mm, 16mm & 19mm. Made from high quality hss steel, with the titanium coated to reduce friction and heat. The bits can be used on wood, plastic, aluminium, insulating plate and pvc board, etc. Titanium nitride coated bits last longer than regular steel countersink bits.

 

KING DO WAY 4-Piece Countersink Drill Bit Sets 14 Hex Shank Sets 6 8 10 12 W Key

KING DO WAY 4-Piece Countersink Drill Bit Sets 1/4 Hex Shank Sets #6 #8 #10 #12 W/ Key

KING DO WAY 4-Piece Countersink Drill Bit Sets 1/4 Hex Shank Sets #6 #8 #10 #12 W/ Key - Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew. Standard hex shank is quick change compatible drill and countersink for wood screws without changing bits. Material hss drill 4241. Four piece set includes bits for drilling pilot holes for screw sizes #6,#8,#10 and #12. Special designed steel counter sleeve countersinks or counter bores pilot hole.

 

TOOGOOR 4pcs Countersink Bits Deburring Tool Chamfer Drill for Metal Wood Plastic Cut Tool

TOOGOO(R) 4pcs Countersink Bits Deburring Tool Chamfer Drill for Metal Wood Plastic Cut Tool

TOOGOO(R) 4pcs Countersink Bits Deburring Tool Chamfer Drill for Metal Wood Plastic Cut Tool - Scope suitable for using in hardness under 25 artifacts, such as aluminum, insulation board, pvc board. Used for workpiece circular aperture chamfering or cone hole, the edges on the surface of the chamfering processing. Hands down 4 piece countersink and deburring tool set is perfect for cutting through metal, wood and plastic quickly and easily. Size(four type) 2-5mm/008-020 inch,5-10mm/020-039 inch, 10-15 mm/039-059 inch, 15-20mm/039-079 inch. Material high speed steel 4241.

 

Tap Drill Bit KitsTFSeven 6Pcs HSS 14 Inch Hex Shank Combination Twist Drill Tap Bit Set UNC Metric M3-M10 Deburr Countersink Bits

Tap Drill Bit Kits,TFSeven 6Pcs HSS 1/4 Inch Hex Shank Combination Twist Drill Tap Bit Set UNC Metric M3-M10 Deburr Countersink Bits

Tap Drill Bit Kits,TFSeven 6Pcs HSS 1/4 Inch Hex Shank Combination Twist Drill Tap Bit Set UNC Metric M3-M10 Deburr Countersink Bits - Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc fast replacement composite cone, uses drill edged principle. Applicable to some types of carbon steel and ordinary steel, copper and aluminum magnesium alloy drilling hole. Made from hardened high-speed steel vs carbon steel for longer lifeback tapered beyond tap to prevent thread damage from over-drilling. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.

 

QUICK CHANGE COUNTERSINK DRILL BIT SIZE 316 BY SNAPPY

QUICK CHANGE COUNTERSINK DRILL BIT SIZE 3/16″ BY SNAPPY

QUICK CHANGE COUNTERSINK DRILL BIT SIZE 3/16″ BY SNAPPY - Combination countersink and/or counter bore for standard wood plugs. Alloy steel & thru hardened with a 82 degree angle. Drill bits are adjustable for different length screws. Made in usa by snappy. Standard hex shank, fits all power bit quick change chucks.

 

MagiDeal 20PcsSet Drill Bits Allen Wrench Countersink Flathead Phillips Bits Air Screw Driver Case Packaging

MagiDeal 20Pcs/Set Drill Bits Allen Wrench Countersink Flathead Phillips Bits Air Screw Driver Case Packaging

MagiDeal 20Pcs/Set Drill Bits Allen Wrench Countersink Flathead Phillips Bits Air Screw Driver Case Packaging - This drill flip drive accessory system is perfect to save your time. The drill driver bit holder makes switch between drill and drive bits in seconds possible. 20 pieces were set in a case which is compact and easy to carry. This item is practical, durable and qualitive. It is a clever, workable gadget that is worthy to buy.