25 Coolest John Guests

 

John Guest LLDPE Plumbing Tubing 12-Inch Diameter 250-Foot Spool White #ad

John Guest LLDPE Plumbing Tubing, 1/2-Inch Diameter, 250-Foot Spool, White

John Guest LLDPE Plumbing Tubing, 1/2-Inch Diameter, 250-Foot Spool, White #ad - Quality linear low-density polyethylene is durable, flexible, odorless, tasteless, and non-toxic. Durability provides excellent chemical resistance. Performance rated to 230 psi at 70 degrees fahrenheit and 120 psi at 150 degrees fahrenheit. Safe fda-compliant material nsf 61 and 51 certified. 1/2-inch white lldpe plumbing tubing can be used with most od tubing connectors easy-rack 250-foot spool.

 

John Guest Polypropylene Tank Ball Valve - PPSV501222W 38 Tube OD x 14 Thread NPTF #ad

John Guest Polypropylene Tank Ball Valve – PPSV501222W (3/8″ Tube OD x 1/4″ Thread NPTF)

John Guest Polypropylene Tank Ball Valve – PPSV501222W (3/8″ Tube OD x 1/4″ Thread NPTF) #ad - Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. This valve should not be used for compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Please purchase genuine apec water system product in “new” condition from amazon. For use with other potable liquids besides water, please check with us for compatibility. Apec water systems does not distribute or sell our products to any 3rd party sellers on amazon. Com or apec water directly for authenticity. Please review the warranty carefully and contact apec if you have any question. This john guest inch polypropylene shut-off valve is fitted with epdm o-rings and is designed for use with potable water.

 

John Guest Acetal Copolymer Tube Fitting Plug 38 Stem OD Pack of 10 #ad

John Guest Acetal Copolymer Tube Fitting, Plug, 3/8″ Stem OD (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Plug, 3/8″ Stem OD (Pack of 10) #ad - Working pressure of up to 150 psi. Plug for closing the end of a pipe or fitting. Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Accepts nylon and polyurethane tube fittings.

 

John Guest PASVPP5 Angle Stop Adapter Valve 12 x 38 x 14 #ad

John Guest PASVPP5 Angle Stop Adapter Valve, 1/2″ x 3/8″ x 1/4″

John Guest PASVPP5 Angle Stop Adapter Valve, 1/2″ x 3/8″ x 1/4″ #ad - All plastic adapter valve with conversion thread works on existing 3/8 compression or 1/2nps angle stop valve allowing access to water supply for reverse-osmosis systems, ice maker, automatic coffee equipment, etc. With capability to shut off water supply to dedicated line for easy filter replacements.

 

John Guest Acetal Copolymer Tube Fitting Union Elbow 14 Tube OD Pack of 10 #ad

John Guest Acetal Copolymer Tube Fitting, Union Elbow, 1/4″ Tube OD (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Union Elbow, 1/4″ Tube OD (Pack of 10) #ad - Accepts nylon and polyurethane tube fittings. Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Union elbow for joining two tubes at an angle. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Working pressure of up to 150 psi.

 

John Guest PM050602E Stem Adapter 6 mm x 14 BSPT Pack of 10 #ad

John Guest PM050602E Stem Adapter, 6 mm x 1/4″ BSPT (Pack of 10)

John Guest PM050602E Stem Adapter, 6 mm x 1/4″ BSPT (Pack of 10) #ad - Bspt metric threads. Quick connect/disconnect. Make swivel tees or elbows. Mates with jg metric fittings. Lead free.

 

John Guest Union Tee 38 Tube OD Polypropylene White PP0212W #ad

John Guest Union Tee 3/8″ Tube OD Polypropylene White (PP0212W)

John Guest Union Tee 3/8″ Tube OD Polypropylene White (PP0212W) #ad - This john guest inch polypropylene fitting is constructed of white polypropylene with food grade epdm o-rings and was designed for compatibility with a wide range of applications. Com or apec water directly for authenticity. Please review the warranty carefully and contact apec if you have any question. Apec water systems does not distribute or sell our products to any 3rd party sellers on amazon. It is simple to use and require no tools for installation, while delivering a 100% leak-free seal every time. Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. Please purchase genuine apec water system product in “new” condition from amazon. All of our reverse osmosis systems use john guest quick-connect fittings to provide customers with easy system setup and worry-free operation for many years to come.

 

John Guest Food Grade Polyethylene Tubing For Reverse Osmosis systems - 10 Feet 38 Inch OD Blue #ad

John Guest Food Grade Polyethylene Tubing For Reverse Osmosis systems – 10 Feet (3/8 Inch OD, Blue)

John Guest Food Grade Polyethylene Tubing For Reverse Osmosis systems – 10 Feet (3/8 Inch OD, Blue) #ad - If you need 20 ft, for example, add quantity 2 into your basket. Common applications are in water purification, water conditioners, ice makers and misting systems. We ship tubing un-cut in a roll. Our tubing is made from fda compliant materials and is nsf international certified. The john guest pe range of plastic tubing is produced in linear low density polyethylene for cold and intermittent hot water applications. Lldpe is more robust than traditional low or medium density polyethylene and is recommended for use with cold and intermittent hot water. Our tubing provides the benefits of a wide range of temperature and pressure suitability, broad chemical compatibility and is made from non contaminating materials. John guest polyethylene tubing is designed for use with john guest super speedfit push-in fittings, john guest shut-off valves and virtually all standard tubing connectors.

 

John Guest Push-to-Connect Soft Tube Supports 12 stem x 38 Tube OD 10Pack #ad

John Guest Push-to-Connect Soft Tube Supports, 1/2″ stem x 3/8″ Tube OD, 10/Pack

John Guest Push-to-Connect Soft Tube Supports, 1/2″ stem x 3/8″ Tube OD, 10/Pack #ad - A single fitting offers secure connections and quick disconnection-no need to purchase two fitting halves. To disconnect, press collet against fitting body to disengage steel teeth-tubing slides right out. Quick-disconnect convenience for a wide variety of tubing material-including soft metals. Meet nsf and requirements for food-grade applications. Simply push tubing past the o-ring to the internal tube stop-steel teeth on the collet grip tubing for leak-proof connections. Fittings work with semirigid plastic (polypropylene, polyethylene, nylon) and soft metal (brass, copper, mild steel) tubing. Use to connect flexible tubing such as tygon or silicone.

 

John Guest ASVPP5LF Angle Stop Adapter Valve 12 x 38 x 14 OD #ad

John Guest ASVPP5LF Angle Stop Adapter Valve, 1/2″ x 3/8″ x 1/4″ OD

John Guest ASVPP5LF Angle Stop Adapter Valve, 1/2″ x 3/8″ x 1/4″ OD #ad - With capability to shut off water supply to dedicated line for easy filter replacements. Adapter valve with conversion thread works on existing 3/8 compression or 1/2nps angle stop valve allowing access to water supply for reverse-osmosis systems, ice maker, automatic coffee equipment, etc.

 

John Guest Push-to-Connect Check Valve 38 10Pack #ad

John Guest Push-to-Connect Check Valve, 3/8″, 10/Pack

John Guest Push-to-Connect Check Valve, 3/8″, 10/Pack #ad - To connect flexible tubing such as tygon or silicone, order soft tube supports. To disconnect, press collet against fitting body to disengage steel teeth-tubing slides right out. Simply push tubing past the o-ring to the internal tube stop-steel teeth on the collet grip tubing for leakproof connections. A single fitting offers secure connections and quick disconnection-no need to purchase two fitting halves. Fittings work with semirigid plastic (polypropylene, polyethylene, nylon) and soft metal (brass, copper, mild steel) tubing.

 

John Guest Acetal Copolymer Tube Fitting Rigid Elbow 14 Tube OD x 14 NPTF Male Pack of 10 #ad

John Guest Acetal Copolymer Tube Fitting, Rigid Elbow, 1/4″ Tube OD x 1/4″ NPTF Male (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Rigid Elbow, 1/4″ Tube OD x 1/4″ NPTF Male (Pack of 10) #ad - Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Rigid elbow for connecting two pipes or fittings at an angle. Working pressure of up to 150 psi. Push-to-connect fitting connects to pipes or tubing on one end and has an nptf male connector on the other. Meets nsf/ansi standards 14, 51, and 61 for quality assurance.

 

John Guest Acetal Copolymer Tube Fitting Two-Way Divider 12 Tube OD Pack of 5 #ad

John Guest Acetal Copolymer Tube Fitting, Two-Way Divider, 1/2″ Tube OD (Pack of 5)

John Guest Acetal Copolymer Tube Fitting, Two-Way Divider, 1/2″ Tube OD (Pack of 5) #ad - Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Working pressure of up to 150 psi. Accepts nylon and polyurethane tube fittings. Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Two-way divider with three openings for connecting and branching three pipes.

 

John Guest Acetal Copolymer Push-To-Connect Tube Fitting Reducing Branch Tee 12 x 38 x 12 Tube OD Pack of 10 #ad

John Guest Acetal Copolymer Push-To-Connect Tube Fitting, Reducing Branch Tee, 1/2″ x 3/8″ x 1/2″ Tube OD (Pack of 10)

John Guest Acetal Copolymer Push-To-Connect Tube Fitting, Reducing Branch Tee, 1/2″ x 3/8″ x 1/2″ Tube OD (Pack of 10) #ad - Working pressure of up to 150 psi. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Accepts nylon and polyurethane tube fittings. Reducing branch tee for connecting three pipes or fittings with different diameters in a main/branch configuration. Meets nsf/ansi standards 14, 51, and 61 for quality assurance.

 

John Guest Acetal Copolymer Tube Fitting Plug-In 90 Degree Elbow 38 Tube OD x 38 Stem OD Pack of 10 #ad

John Guest Acetal Copolymer Tube Fitting, Plug-In 90 Degree Elbow, 3/8″ Tube OD x 3/8″ Stem OD (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Plug-In 90 Degree Elbow, 3/8″ Tube OD x 3/8″ Stem OD (Pack of 10) #ad - 90-degree elbow for connecting two pipes or fittings at an angle. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Working pressure of up to 150 psi. Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other. Meets nsf/ansi standards 14, 51, and 61 for quality assurance.

 

John Guest PPSV010822W Male Valve 14 OD x 14 NPTF Pack of 10 #ad

John Guest PPSV010822W Male Valve, 1/4″ OD x 1/4″ NPTF (Pack of 10)

John Guest PPSV010822W Male Valve, 1/4″ OD x 1/4″ NPTF (Pack of 10) #ad - Pushfit shut-off valve threads intonptf port to provide a permanent or removable leak free connection.

 

John Guest Acetal Copolymer Tube Fitting Union Tee 14 Tube OD Pack of 10 #ad

John Guest Acetal Copolymer Tube Fitting, Union Tee, 1/4″ Tube OD (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Union Tee, 1/4″ Tube OD (Pack of 10) #ad - Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Union tee with female connections on all three ends. Working pressure of up to 150 psi. Accepts nylon and polyurethane tube fittings. Meets nsf/ansi standards 14, 51, and 61 for quality assurance.

 

John Guest Acetal Copolymer Barbed Tube Fitting Stem 38 Stem OD x 14 Hose ID Pack of 10 #ad

John Guest Acetal Copolymer Barbed Tube Fitting, Stem, 3/8″ Stem OD x 1/4″ Hose ID (Pack of 10)

John Guest Acetal Copolymer Barbed Tube Fitting, Stem, 3/8″ Stem OD x 1/4″ Hose ID (Pack of 10) #ad - Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Stem fitting inserts into tubing to connect pipes or tubes with different ends. Working pressure of up to 150 psi. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Stem fitting for connecting pipes or tubes in a straight line.

 

John Guest Blue 100 ftroll 38 Polyethylene Tube Tubing Drinking Water RO Reverse Osmosis DI Aquarium Pipe LLDPE #ad

John Guest Blue 100 ft/roll 3/8″ Polyethylene Tube Tubing Drinking Water RO Reverse Osmosis DI Aquarium Pipe LLDPE

John Guest Blue 100 ft/roll 3/8″ Polyethylene Tube Tubing Drinking Water RO Reverse Osmosis DI Aquarium Pipe LLDPE #ad - Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Working pressure of up to 150 psi. Adapter for connecting pipes or fittings of different types. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Push-to-connect fitting connects to pipes or tubing on one end and a flared female npt connector on the other.

 

John Guest Speedfit KIT-ISRK Service and Repair Kit Push-to-Connect Polypropylene Fittings 92-Count #ad

John Guest Speedfit KIT-ISRK Service and Repair Kit, Push-to-Connect, Polypropylene Fittings, 92-Count

John Guest Speedfit KIT-ISRK Service and Repair Kit, Push-to-Connect, Polypropylene Fittings, 92-Count #ad - Durability provides excellent chemical resistance. Quality durable, odorless, tasteless, and non-toxic. Compatibility the 92-piece service and repair kit includes fittings for use in multiple different applications. Safe fda-compliant material nsf 61 and 51 certified. No tools required push-to-connect fittings provide a simple, quick, reliable, leak-free connection with no tools required.

 

John Guest PI491616S Three-Way Divider Pack of 5 #ad

John Guest PI491616S Three-Way Divider (Pack of 5)

John Guest PI491616S Three-Way Divider (Pack of 5) #ad - Pushfit three-way connector divides incoming line into three lines to provide permanent or removable leak free connection.

 

John Guest Acetal Copolymer Tube Fitting End Stop 14 Tube OD Pack of 10 #ad

John Guest Acetal Copolymer Tube Fitting, End Stop, 1/4″ Tube OD (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, End Stop, 1/4″ Tube OD (Pack of 10) #ad - Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. End stop for closing the end of a pipe or fitting. Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Accepts nylon and polyurethane tube fittings. Working pressure of up to 150 psi.

 

John Guest Acetal Copolymer Tube Fitting Cross 38 Tube OD Pack of 10 #ad

John Guest Acetal Copolymer Tube Fitting, Cross, 3/8″ Tube OD (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Cross, 3/8″ Tube OD (Pack of 10) #ad - Pi fittings in grey acetal copolymer, making them especially suitable for applications involving foodstuffs and potable liquids. Iso 9001 and wras approved. Accepted by almost all the world’s beer and beverage producers and by the manufacturers of drinks dispense equipment, john guest products have quality and performance approvals from leading testing and acceptance authorities. They are however equally suitable for air and inert gases and can be used on n2/co2 (installed in accordance with the british beer and pub association code of practice) mixed gas dispense lines and in pneumatic applications and vacuum. Nsf 14, nsf 51, nsf 61 approved. All these fittings are produced in food and drug administration (fda) compliant materials and are therefore recommended for food quality applications.

 

JOHN GUEST 14 One Way Check Valve RO Reverse Osmosis Water Filter NSF Certifie #ad

JOHN GUEST 1/4″ One Way Check Valve RO Reverse Osmosis Water Filter NSF Certifie

JOHN GUEST 1/4″ One Way Check Valve RO Reverse Osmosis Water Filter NSF Certifie #ad - The super speedfit acetal single check valve ensures protection against reversal of flow. The inner valve is spring loaded and the fitting produces low headloss. They are designed for conenction to either plastic or soft metal tube and they are intended for liquids only note that they are not suitable for air and vacuum applications. It is also recommended that the non-return valve is regularly checked and maintained pipe connection has never been easier than with john guest fittings.

 

John Guest NC2098LF Female Garden Hose Connector 14 OD x 34 Pack of 10 #ad

John Guest NC2098LF Female Garden Hose Connector, 1/4″ OD x 3/4 (Pack of 10)

John Guest NC2098LF Female Garden Hose Connector, 1/4″ OD x 3/4 (Pack of 10) #ad - Lead free brass pushfit female flare fitting threads onto male flare to provide permanent or removable leak free connection.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.