24 Coolest Thread Cutting Screw Types

 

Steel Thread Cutting Screw Zinc Plated Finish Serrated Hex Washer Head Type F 516-18 Thread Size 1-12 Length Pack of 10

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Type F, 5/16″-18 Thread Size, 1-1/2″ Length (Pack of 10)

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Type F, 5/16″-18 Thread Size, 1-1/2″ Length (Pack of 10) - Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Hex Washer Head Slotted Drive Type F 14-20 Thread Size 1-12 Length Pack of 5

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 1/4″-20 Thread Size, 1-1/2″ Length (Pack of 5)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 1/4″-20 Thread Size, 1-1/2″ Length (Pack of 5) - Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has a flange for additional grip with the mating surface. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Hex Washer Head Type F 12-24 Thread Size 12 Length Pack of 10

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, #12-24 Thread Size, 1/2″ Length (Pack of 10)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, #12-24 Thread Size, 1/2″ Length (Pack of 10) - Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

Steel Thread Cutting Screw Black Oxide Finish 82 Degree Flat Undercut Head Phillips Drive Type F 6-32 Thread Size 12 Length Pack of 100

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #6-32 Thread Size, 1/2″ Length (Pack of 100)

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #6-32 Thread Size, 1/2″ Length (Pack of 100) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Black oxide finish offers mild corrosion resistance and lubricity. Steel is often used in applications where strength is the primary consideration. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Thread Cutting Screw Black Oxide Finish 82 Degree Flat Undercut Head Phillips Drive Type F 12-24 Thread Size 34 Length Pack of 50

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #12-24 Thread Size, 3/4″ Length (Pack of 50)

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #12-24 Thread Size, 3/4″ Length (Pack of 50) - Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Hex Washer Head Slotted Drive Type F 516-18 Thread Size 34 Length Pack of 5

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 5/16″-18 Thread Size, 3/4″ Length (Pack of 5)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 5/16″-18 Thread Size, 3/4″ Length (Pack of 5) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Plain surface has no finish or coating. Slotted drive has a linear slot for use with a flat-blade driver. 18-8 stainless steel provides good corrosion resistance and strength. Hex washer head has a flange for additional grip with the mating surface.

 

Steel Thread Cutting Screw Zinc Plated 82 Degree Flat Head Phillips Drive Type F 4-40 Thread Size 38 Length Pack of 100

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Head, Phillips Drive, Type F, #4-40 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Head, Phillips Drive, Type F, #4-40 Thread Size, 3/8″ Length (Pack of 100) - Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Steel is often used in applications where strength is the primary consideration.

 

Steel Thread Cutting Screw Zinc Plated 82 Degree Flat Undercut Head Phillips Drive Type F 10-24 Thread Size 38 Length Pack of 100

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-24 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-24 Thread Size, 3/8″ Length (Pack of 100) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes.

 

Steel Thread Cutting Screw Zinc Plated Finish Serrated Hex Washer Head Type F 516-18 Thread Size 34 Length Pack of 10

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Type F, 5/16″-18 Thread Size, 3/4″ Length (Pack of 10)

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Type F, 5/16″-18 Thread Size, 3/4″ Length (Pack of 10) - Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side. Steel is often used in applications where strength is the primary consideration.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Hex Washer Head Slotted Drive Type F 14-20 Thread Size 34 Length Pack of 10

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 1/4″-20 Thread Size, 3/4″ Length (Pack of 10)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 1/4″-20 Thread Size, 3/4″ Length (Pack of 10) - 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Hex washer head has a flange for additional grip with the mating surface. Slotted drive has a linear slot for use with a flat-blade driver. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish 82 Degree Flat Undercut Head Phillips Drive Type F 8-32 Thread Size 516 Length Pack of 100

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #8-32 Thread Size, 5/16″ Length (Pack of 100)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #8-32 Thread Size, 5/16″ Length (Pack of 100) - Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

Steel Thread Cutting Screw Black Oxide Finish 82 Degree Flat Undercut Head Phillips Drive Type F 12-24 Thread Size 12 Length Pack of 50

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #12-24 Thread Size, 1/2″ Length (Pack of 50)

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #12-24 Thread Size, 1/2″ Length (Pack of 50) - Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

14-20 x 12 Thread Cutting Screw Type F Zinc inch Head Style Hex Washer Indented QUANTITY 50 Drive Slotted Point Type F Thread Coarse Thread UNC

1/4″-20 x 1/2″ Thread Cutting Screw, Type F, Zinc (inch) Head Style: Hex Washer (Indented) (QUANTITY: 50) Drive: Slotted, Point: Type F Thread: Coarse Thread (UNC)

1/4″-20 x 1/2″ Thread Cutting Screw, Type F, Zinc (inch) Head Style: Hex Washer (Indented) (QUANTITY: 50) Drive: Slotted, Point: Type F Thread: Coarse Thread (UNC) - Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’. Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers. Trust the quality of jet fitting thread cutting screw, type f, zinc (inch).

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Pan Head Phillips Drive Type 25 8-18 Thread Size 1 Length Pack of 25

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type 25, #8-18 Thread Size, 1″ Length (Pack of 25)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type 25, #8-18 Thread Size, 1″ Length (Pack of 25) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type 25 point has coarse threads that taper down to a blunt edge with a large cutting surface, provides excellent chip clearance, and is suitable for use in plastics and other soft materials. Plain surface has no finish or coating. Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish 82 Degree Flat Head Phillips Drive Type F 14-20 Thread Size 1 Length Pack of 25

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Head, Phillips Drive, Type F, 1/4″-20 Thread Size, 1″ Length (Pack of 25)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Head, Phillips Drive, Type F, 1/4″-20 Thread Size, 1″ Length (Pack of 25) - Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength.

 

410 Stainless Steel Thread Cutting Screw Plain Finish Pan Head Phillips Drive Type 25 6-20 Thread Size 38 Length Pack of 100

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type 25, #6-20 Thread Size, 3/8″ Length (Pack of 100)

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type 25, #6-20 Thread Size, 3/8″ Length (Pack of 100) - 410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread cutting screw with type 25 point has coarse threads that taper down to a blunt edge with a large cutting surface, provides excellent chip clearance, and is suitable for use in plastics and other soft materials. Pan head has a flat top and short vertical sides with a rounded top edge. Plain surface has no finish or coating.

 

Steel Thread Cutting Screw Zinc Plated Finish Hex Washer Head Type 23 14-20 Thread Size 1 Length Pack of 25

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Type 23, 1/4″-20 Thread Size, 1″ Length (Pack of 25)

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Type 23, 1/4″-20 Thread Size, 1″ Length (Pack of 25) - Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Steel is often used in applications where strength is the primary consideration. Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Zinc plating resists corrosion and has a reflective appearance.

 

Steel Thread Cutting Screw Black Zinc Plated Pan Head Phillips Drive Type 23 12-24 Thread Size 12 Length Pack of 50

Steel Thread Cutting Screw, Black Zinc Plated, Pan Head, Phillips Drive, Type 23, #12-24 Thread Size, 1/2″ Length (Pack of 50)

Steel Thread Cutting Screw, Black Zinc Plated, Pan Head, Phillips Drive, Type 23, #12-24 Thread Size, 1/2″ Length (Pack of 50) - Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Zinc plating resists corrosion and has a black reflective appearance.

 

Steel Thread Cutting Screw Zinc Plated Finish Serrated Hex Washer Head Slotted Drive Type F 38-16 Thread Size 1-12 Length Pack of 10

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slotted Drive, Type F, 3/8″-16 Thread Size, 1-1/2″ Length (Pack of 10)

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slotted Drive, Type F, 3/8″-16 Thread Size, 1-1/2″ Length (Pack of 10) - Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

Steel Thread Cutting Screw Black Oxide Finish Pan Head Phillips Drive Type F 6-32 Thread Size 12 Length Pack of 100

Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type F, #6-32 Thread Size, 1/2″ Length (Pack of 100)

Steel Thread Cutting Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type F, #6-32 Thread Size, 1/2″ Length (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Black oxide finish offers mild corrosion resistance and lubricity. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration.

 

ABP Digital 10-32 x 12 Slotted Indented Hex Washer Head Thread Cutting Screw Type F Green Zinc 5 Pack

ABP Digital 10-32 x 1/2″ Slotted Indented Hex Washer Head Thread Cutting Screw Type F Green Zinc 5 Pack

ABP Digital 10-32 x 1/2″ Slotted Indented Hex Washer Head Thread Cutting Screw Type F Green Zinc 5 Pack - The zinc plating offers corrosion resistance and has a green reflective appearance. The hex washer head has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the head for a screwdriver. Thread rolling screws, also called thread forming screws, do not remove material but instead press against the wall of the hole to displace the material and form the threads. The phillips drive has an x-shaped slot that accepts a phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener. Thread cutting screws cut the wall of the hole to create the thread, creating material chips that need to be cleared away from the hole to prevent clogging. Steel is often used in applications where strength is the primary consideration. Thread cutting and thread rolling screws, two types of self-tapping screws, are threaded fasteners that create a mating thread in the wall of a hole. The type f point is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. The flange acts like a washer to increase the fastener’s bearing surface and distribute the clamping force over a larger area, providing grip and reducing damage to mating surfaces. The two screws differ from each other in the way that they create the threads. The steel thread cutting screw has a green zinc plating, a type f point style, and a hex washer head with a phillips drive. The screw has machine screw threads that taper down to a blunt point with multiple cutting edges and chip cavities.

 

516-18 x 34 Thread Cutting Screw Type F Zinc inch Head Style Hex Washer Indented QUANTITY 50 Drive Slotted Point Type F Thread Coarse Thread UNC

5/16″-18 x 3/4″ Thread Cutting Screw, Type F, Zinc (inch) Head Style: Hex Washer (Indented) (QUANTITY: 50) Drive: Slotted, Point: Type F Thread: Coarse Thread (UNC)

5/16″-18 x 3/4″ Thread Cutting Screw, Type F, Zinc (inch) Head Style: Hex Washer (Indented) (QUANTITY: 50) Drive: Slotted, Point: Type F Thread: Coarse Thread (UNC) - Trust the quality of jet fitting thread cutting screw, type f, zinc (inch). Since 1946 jet fitting & supply has been the name called upon by manufacaturers, assemblers and ‘makers’. Jet fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, makers and diy’ers.

 

410 Stainless Steel Thread Cutting Screw Plain Finish Pan Head Phillips Drive Type F 14-20 Thread Size 34 Length Pack of 25

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, 1/4″-20 Thread Size, 3/4″ Length (Pack of 25)

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, 1/4″-20 Thread Size, 3/4″ Length (Pack of 25) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Pan head has a flat top and short vertical sides with a rounded top edge. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Hex Washer Head Slotted Drive Type F 14-20 Thread Size 12 Length Pack of 10

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 1/4″-20 Thread Size, 1/2″ Length (Pack of 10)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 1/4″-20 Thread Size, 1/2″ Length (Pack of 10) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Hex washer head has a flange for additional grip with the mating surface. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Slotted drive has a linear slot for use with a flat-blade driver.