23 Greatest Marine Hose Clamps

 

Trident Marine 730-0340 Stainless Steel Contant torque Hose Clamps 58 Range 06875 to 125

Trident Marine 730-0340 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 0.6875″ to 1.25″

Trident Marine 730-0340 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 0.6875″ to 1.25″ - Conventional worm gear, t-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for with out re-tightening or loosening the clamps. Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80-percent of installation torque. Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools.

 

Trident Marine 730-4000 Stainless Steel Contant torque Hose Clamps 58 Range 425 to 5125

Trident Marine 730-4000 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 4.25″ to 5.125″

Trident Marine 730-4000 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 4.25″ to 5.125″ - Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80-percent of installation torque. Conventional worm gear, t-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for with out re-tightening or loosening the clamps. Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools.

 

Trident Marine 720-6000L Stainless Steel T-Bolt Hose Clamps Range 653 TO 710

Trident Marine 720-6000L Stainless Steel T-Bolt Hose Clamps, Range 6.53″ TO 7.10″

Trident Marine 720-6000L Stainless Steel T-Bolt Hose Clamps, Range 6.53″ TO 7.10″ - Trident marine t-bolt clamps are built with safety in mind. 53″ to 7. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products. 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 6. 10″)very strong and secure clamp for critical installations.

 

Trident Marine 730-1120 Stainless Steel Contant torque Hose Clamps 58 Range 175 to 2625

Trident Marine 730-1120 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 1.75″ to 2.625″

Trident Marine 730-1120 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 1.75″ to 2.625″ - Conventional worm gear, t-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for with out re-tightening or loosening the clamps. Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools. Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80-percent of installation torque.

 

Trident Marine 720-8000 Stainless Steel T-Bolt Hose Clamps 34 Range 830 to 887

Trident Marine 720-8000 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 8.30″ to 8.87″

Trident Marine 720-8000 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 8.30″ to 8.87″ - It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time. 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 1. 59″)very strong and secure clamp for critical installations. Trident marine t-bolt clamps are built with safety in mind. 28″ to 1. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.

 

Trident Marine 720-8500 Stainless Steel T-Bolt Hose Clamps 34 Range 825 to 869

Trident Marine 720-8500 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 8.25″ to 8.69″

Trident Marine 720-8500 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 8.25″ to 8.69″ - 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 1. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time. 28″ to 1. 59″)very strong and secure clamp for critical installations. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products. Trident marine t-bolt clamps are built with safety in mind.

 

Trident Marine 720-3120L Stainless Steel T-Bolt Hose Clamps 34 Range 378 to 444

Trident Marine 720-3120L Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 3.78″ to 4.44″

Trident Marine 720-3120L Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 3.78″ to 4.44″ - 28″ to 1. 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 1. 59″)very strong and secure clamp for critical installations. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products. Trident marine t-bolt clamps are built with safety in mind. It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time.

 

250 63012 1116 x 1 14 BREEZE STAINLESS MARINE GRADE HOSE CLAMPS

(250) 63012 11/16″ x 1 1/4″ BREEZE STAINLESS MARINE GRADE HOSE CLAMPS

(250) 63012 11/16″ x 1 1/4″ BREEZE STAINLESS MARINE GRADE HOSE CLAMPS - (250) 63012 11/16″x1 1/4″ breeze marine grade stainless steel hose clamps 11/16″ to 1 1/4″, marine grade high corrosion resisting stainless steel clamps, necessary for marine, underground & other high corrosion applications, band & screw are all stainless steel, 4 piece interlock construction.

 

Trident Marine 720-16000 Stainless Steel T-Bolt Hose Clamps 34 Range 1620 to 1677

Trident Marine 720-16000 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 16.20″ to 16.77″

Trident Marine 720-16000 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 16.20″ to 16.77″ - 28″ to 1. 59″)very strong and secure clamp for critical installations. Trident marine t-bolt clamps are built with safety in mind. 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 1. It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products.

 

Trident Marine 720-5000 Stainless Steel T-Bolt Hose Clamps 34 Range 528 to 559

Trident Marine 720-5000 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 5.28″ to 5.59″

Trident Marine 720-5000 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 5.28″ to 5.59″ - It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time. Trident marine t-bolt clamps are built with safety in mind. 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 1. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products. 28″ to 1. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. 59″)very strong and secure clamp for critical installations.

 

Trident Marine 730-2000 Stainless Steel Contant torque Hose Clamps 58 Range 225 to 3125

Trident Marine 730-2000 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 2.25″ to 3.125″

Trident Marine 730-2000 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 2.25″ to 3.125″ - Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools. Conventional worm gear, t-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for with out re-tightening or loosening the clamps. Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80-percent of installation torque.

 

Pack of 12 Marine Hose Clamp Stainless Steel Clamps Worm-Gear Hose Clamp Miniature Power-Seal Worm-Drive Kit 12

Pack of 12 Marine Hose Clamp Stainless Steel Clamps Worm-Gear Hose Clamp, Miniature Power-Seal Worm-Drive Kit, 1/2

Pack of 12 Marine Hose Clamp Stainless Steel Clamps Worm-Gear Hose Clamp, Miniature Power-Seal Worm-Drive Kit, 1/2 - Stainless hose clamp’s band width of 5/16” better fits small hoses than larger widths. For commonly use in air and fluid line applications,industrial, electronic, and automotive applications. The good quality of stainless steel hose clamp can resist the corrosion and rust in marine environments. Hose clamps attach hoses to fittings to prevent flow leakage package including 12worm gear clamp. Worm gear hose clamp can adjust the miniature size for small hoses installed in confined spaces.

 

Trident Marine 720-12000L Stainless Steel T-Bolt Hose Clamps 34 Range 1275 to 1332

Trident Marine 720-12000L Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 12.75″ to 13.32″

Trident Marine 720-12000L Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 12.75″ to 13.32″ - With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products. 59″)very strong and secure clamp for critical installations. 28″ to 1. Trident marine t-bolt clamps are built with safety in mind. It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time. 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 1.

 

Trident Marine 730-3000 Stainless Steel Contant torque Hose Clamps 58 Range 325 to 4125

Trident Marine 730-3000 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 3.25″ to 4.125″

Trident Marine 730-3000 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 3.25″ to 4.125″ - Conventional worm gear, t-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for with out re-tightening or loosening the clamps. Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools. Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80-percent of installation torque.

 

Norma Pennsylvania-Breeze 63104 Stainless-Steel Marine Hose Clamp 4-18 to 7 - Quantity 80

Norma Pennsylvania-Breeze 63104 Stainless-Steel Marine Hose Clamp, 4-1/8 to 7″ – Quantity 80

Norma Pennsylvania-Breeze 63104 Stainless-Steel Marine Hose Clamp, 4-1/8 to 7″ – Quantity 80 - Pack of (80) breeze 63104 stainless-steel marine grade hose clamp, 4-1/8 to 7″ , 4 1/8″ to 7″, marine grade high corrosion resisting stainless steel clamps necessary for marine, underground & other high corrosion applications band & screw are all stainless steel 4 piece interlock construction made in usa.

 

Trident Marine 720-14000 Stainless Steel T-Bolt Hose Clamps 34 Range 1420 to 1477

Trident Marine 720-14000 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 14.20″ to 14.77″

Trident Marine 720-14000 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 14.20″ to 14.77″ - 28″ to 1. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products. Trident marine t-bolt clamps are built with safety in mind. 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 1. It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. 59″)very strong and secure clamp for critical installations.

 

Breeze 63128 Stainless Steel Marine Grade Hose Clamp 5-58 x 8-12-Inch - Quantity 30

Breeze 63128 Stainless Steel Marine Grade Hose Clamp, 5-5/8 x 8-1/2-Inch – Quantity 30

Breeze 63128 Stainless Steel Marine Grade Hose Clamp, 5-5/8 x 8-1/2-Inch – Quantity 30 - Necessary for marine, undergound & other high corrosion applications. 5-5/8″ to 8-1/2″, marine grade high corrosion resisting stainless steel clamps. Breeze 63128 stainless steel hose clamp, 5-5/8 x 8-1/2-inch, quantity of 30. Band & screw are all stainless steel. 4 piece interlock construction, made in usa.

 

Trident Marine 730-2120 Stainless Steel Contant torque Hose Clamps 58 Range 275 to 3625

Trident Marine 730-2120 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 2.75″ to 3.625″

Trident Marine 730-2120 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 2.75″ to 3.625″ - Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80-percent of installation torque. Conventional worm gear, t-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for with out re-tightening or loosening the clamps. Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools.

 

Trident Marine 730-1140 Stainless Steel Contant torque Hose Clamps 58 Range 125 to 2125

Trident Marine 730-1140 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 1.25″ to 2.125″

Trident Marine 730-1140 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 1.25″ to 2.125″ - Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools. Conventional worm gear, t-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for with out re-tightening or loosening the clamps. Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80-percent of installation torque.

 

40 63012 1116 x 1 14 BREEZE STAINLESS MARINE GRADE HOSE CLAMPS

(40) 63012 11/16″ x 1 1/4″ BREEZE STAINLESS MARINE GRADE HOSE CLAMPS

(40) 63012 11/16″ x 1 1/4″ BREEZE STAINLESS MARINE GRADE HOSE CLAMPS - (40) 63012 11/16″x1 1/4″ breeze marine grade stainless steel hose clamps 11/16″ to 1 1/4″, marine grade high corrosion resisting stainless steel clamps, necessary for marine, underground & other high corrosion applications, band & screw are all stainless steel, 4 piece interlock construction.

 

Trident Marine 720-2340 Stainless Steel T-Bolt Hose Clamps 34 Range 303 to 334

Trident Marine 720-2340 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 3.03″ to 3.34″

Trident Marine 720-2340 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 3.03″ to 3.34″ - It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products. 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 1. 59″)very strong and secure clamp for critical installations. 28″ to 1. Trident marine t-bolt clamps are built with safety in mind.

 

Trident Marine 720-1140 Stainless Steel T-Bolt Hose Clamps 34 Range 153 to 184

Trident Marine 720-1140 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 1.53″ to 1.84″

Trident Marine 720-1140 Stainless Steel T-Bolt Hose Clamps, 3/4″, Range 1.53″ to 1.84″ - Trident marine t-bolt clamps are built with safety in mind. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. 28″ to 1. It is recommended that two clamps be used on each end of a wet exhaust installation for a very long time. 316 stainless steel 3/4″ wide band, 18-8 stainless bolt and lock nut, stainless steel t-bolt clamps (range 1. These clamps are sold in 2 configurations part numbers ending in “l” signify that a long t-bolt is being used and is for our rubber hose products. 59″)very strong and secure clamp for critical installations.

 

Trident Marine 730-6000 Stainless Steel Contant torque Hose Clamps 58 Range 625 to 7125

Trident Marine 730-6000 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 6.25″ to 7.125″

Trident Marine 730-6000 Stainless Steel Contant torque Hose Clamps, 5/8″, Range 6.25″ to 7.125″ - Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80-percent of installation torque. Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools. Conventional worm gear, t-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for with out re-tightening or loosening the clamps.