23 Coolest Richards Micro Tools

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 30 Deg Helix 2 Flutes 15 Overall Length 002 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5″ Overall Length, 0.02″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5″ Overall Length, 0.02″ Cutting Diameter, 1/8″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. General purpose cut.

 

Richards Micro-Tool Carbide Micro Ball Nose End Mill Diamond-Like Finish 35 Deg Helix 3 Flutes 25 Overall Length 132 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/32″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/32″ Cutting Diameter, 1/8″ Shank Diameter - Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Richards Micro-Tool Carbide Ball Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 332 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/32″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/32″ Cutting Diameter, 1/8″ Shank Diameter - 750″ flute length. Number of flute, 3. 125″ shank diameter. 250″ over all length. 3/32″ diameter.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 332 Cutting Diameter 14 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/32″ Cutting Diameter, 1/4″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/32″ Cutting Diameter, 1/4″ Shank Diameter - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. General purpose cut. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Richards Micro-Tool Carbide Square Nose End Mill Diamond-Like Finish 35 Deg Helix 3 Flutes 25 Overall Length 332 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/32″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/32″ Cutting Diameter, 1/8″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 0125 Cutting Diameter 14 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 0.125″ Cutting Diameter, 1/4″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 0.125″ Cutting Diameter, 1/4″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. General purpose cut. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 116 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter - 125″ shank diameter. 1/16″ diameter. 250″ over all length. 500″ flute length. Number of flute, 3.

 

Richards Micro Tool 691C-0200 Center Drill 2 Flute 000 x 90 Degree 0020 Diameter 150 Overall Length 0020 Flute Length TiAlN Coating

Richards Micro Tool 691C-0200 Center Drill, 2 Flute, 000 x 90 Degree, 0.020″ Diameter, 1.50″ Overall Length, 0.020″ Flute Length, TiAlN Coating

Richards Micro Tool 691C-0200 Center Drill, 2 Flute, 000 x 90 Degree, 0.020″ Diameter, 1.50″ Overall Length, 0.020″ Flute Length, TiAlN Coating - Angled edge. Number of flutes 2. Drill length 0020, flute length 0020. Shank diameter 0125. Drill diameter 0020, body diameter 0125.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 316 Cutting Diameter 14 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/16″ Cutting Diameter, 1/4″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/16″ Cutting Diameter, 1/4″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. General purpose cut. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Richards Micro-Tool Carbide Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 332 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/32″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 3/32″ Cutting Diameter, 1/8″ Shank Diameter - 250″ over all length. Number of flute, 3. 750″ flute length. 125″ shank diameter. 3/32″ diameter.

 

Richards Micro-Tool Carbide Ball Nose End Mill Diamond-Like Finish 35 Deg Helix 3 Flutes 3 Overall Length 18 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 3″ Overall Length, 1/8″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 3″ Overall Length, 1/8″ Cutting Diameter, 1/8″ Shank Diameter - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 116 Cutting Diameter 14 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/4″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/4″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. General purpose cut. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 164 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/64″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/64″ Cutting Diameter, 1/8″ Shank Diameter - 1/64″ diameter. 125″ shank diameter. 078″ flute length. 250″ over all length. Number of flute, 3.

 

Richards Micro Tool 839-2025X047 Corner Rounding End Mill 2 Flute Carbide 0047 Diameter 0025 Radius

Richards Micro Tool 839-2.025X.047 Corner Rounding End Mill, 2 Flute, Carbide, 0.047″ Diameter, 0.025″ Radius

Richards Micro Tool 839-2.025X.047 Corner Rounding End Mill, 2 Flute, Carbide, 0.047″ Diameter, 0.025″ Radius - Double end 2 flute corner rounding end mill, with right hand direction of cut.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Diamond-Like Finish 35 Deg Helix 3 Flutes 25 Overall Length 116 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/16″ Cutting Diameter, 1/8″ Shank Diameter - Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. Round shanks allow use with a wide variety of toolholding systems.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 30 Deg Helix 2 Flutes 15 Overall Length 001 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5″ Overall Length, 0.01″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5″ Overall Length, 0.01″ Cutting Diameter, 1/8″ Shank Diameter - 150″ overall length. 0010″ diameter. Number of flutes, 2.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Double End Uncoated Bright Finish 30 Deg Helix 2 Flutes 15 Overall Length 132 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Double End, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5″ Overall Length, 1/32″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Double End, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5″ Overall Length, 1/32″ Cutting Diameter, 1/8″ Shank Diameter - 1/32″ diameter. Number of flute, 2. 150″ over all length. 125″ shank diameter. 1/16″ flute length.

 

Richards Micro-Tool Carbide Micro Square Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 25 Overall Length 532 Cutting Diameter 14 Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 5/32″ Cutting Diameter, 1/4″ Shank Diameter

Richards Micro-Tool Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 5/32″ Cutting Diameter, 1/4″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. General purpose cut. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Richards Micro-Tool Carbide Ball Nose End Mill Uncoated Bright Finish 35 Deg Helix 3 Flutes 3 Overall Length 0125 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 3″ Overall Length, 0.125″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 35 Deg Helix, 3 Flutes, 3″ Overall Length, 0.125″ Cutting Diameter, 1/8″ Shank Diameter - 300″ over all length. 100″ flute length. Number of flute, 3. 125″ shank diameter. 1/8″ diameter.

 

Richards Micro-Tool Carbide Square Nose End Mill Diamond-Like Finish 30 Deg Helix 4 Flutes 15 Overall Length 764 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Diamond-Like Finish, 30 Deg Helix, 4 Flutes, 1.5″ Overall Length, 7/64″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Diamond-Like Finish, 30 Deg Helix, 4 Flutes, 1.5″ Overall Length, 7/64″ Cutting Diameter, 1/8″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. Amorphous diamond (ad coating) is a smooth, hard, thin film coating used primarily for machining graphite and non-ferrous materials. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Richards Micro-Tool Carbide Micro Ball Nose End Mill Diamond-Like Finish 35 Deg Helix 3 Flutes 25 Overall Length 132 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/32″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Micro Ball Nose End Mill, Diamond-Like Finish, 35 Deg Helix, 3 Flutes, 2.5″ Overall Length, 1/32″ Cutting Diameter, 1/8″ Shank Diameter - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Ad (amorphous diamond) coated “g” mills are specifically designed for machining graphite electrodes. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Diamond coatings provide extreme wear resistance, making them ideal for machining abrasive non-metals such as ceramic, fiberglass, plastics, and composites not for use machining metal. Round shanks allow use with a wide variety of toolholding systems.

 

Richards Micro-Tool Carbide Square Nose End Mill Double End Uncoated Bright Finish 30 Deg Helix 4 Flutes 15 Overall Length 764 Cutting Diameter 18 Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Double End, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5″ Overall Length, 7/64″ Cutting Diameter, 1/8″ Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Double End, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5″ Overall Length, 7/64″ Cutting Diameter, 1/8″ Shank Diameter - 7/64″ diameter. 150″ over all length. 125″ shank diameter. 1/4″ flute length. Number of flute, 4.

 

Richards Micro-Tool Carbide Square Nose End Mill Extended Reach Uncoated Bright Finish 30 Deg Helix 4 Flutes 15 Overall Length 01 Cutting Diameter 316 Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Extended Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5″ Overall Length, 0.1″ Cutting Diameter, 3/16″ Shank Diameter

Richards Micro-Tool Carbide Square Nose End Mill, Extended Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5″ Overall Length, 0.1″ Cutting Diameter, 3/16″ Shank Diameter - These are standard end mill with number of flutes 4, made of carbide.