19 Coolest 7 Segment Displays

 

4-Digit 7-Segment Display - Kelly Green #ad

4-Digit 7-Segment Display – Kelly Green

4-Digit 7-Segment Display – Kelly Green #ad - The hardware interface is sixteen (two rows of eight) through-hole pins. The leds have a forward voltage of 2. This is a basic, 4-digit 7-segment display, green in color. The display features one decimal point per digit, and individually controllable apostrophe and colon points. 1vdc and a max forward current of 20ma. It has a common anode.

 

7 Segment Display - Green CC #ad

7 Segment Display – Green (CC)

7 Segment Display – Green (CC) #ad - Your basic common cathode 7-segment led with one decimal point. 5mm. The overall dimensions of this display are 19 x 12.

 

Adafruit 12 4-Digit 7-Segment Display wI2C Backpack - Green ADA1268 #ad

Adafruit 1.2″ 4-Digit 7-Segment Display w/I2C Backpack – Green [ADA1268]

Adafruit 1.2″ 4-Digit 7-Segment Display w/I2C Backpack – Green [ADA1268] #ad - If you’ve been eye. The product kit comes witha fully tested and assembled led backpack ultra-bright 4-digit 1. 2″ tall green seven-segment display 5-pin headera bit of soldering is required to attach the matrix onto the backpack but its very easy to do and only takes about 5 minutes. They use constant-current drivers for ultra-bright, consistent color (the images above are photographed at the dimmest setting to avoid overloading our camera), 1/16 step display dimming, all via a simple i2c interface. That’s a lot of pins, and there are driver chips like the max7219 that can control a matrix for you but there’s a lot of wiring to set up and they take up a ton of space. What’s better than a single led lots of leds a fun way to make a numeric display is to use a 4-digit 7-segment display. Here at adafruit we feel your pain after all, wouldn’t it be awesome if you could control a matrix without tons of wiring that’s where these adorable led matrix backpacks come in. The backpacks come with address-selection jumpers so you can connect up to eight 7-segments (or a combination, such as four mini 8×8’s and four 7-segments, etc) on a single i2c bus. The backpacks use a driver chip that does all the heavy lifting for you they have a built in clock so they multiplex the display. We have them for a variety of 8×8 and 7-segment displays. Of course, in classic adafruit fashion, we also have a detailed tutorial showing you how to solder, wire and control the display. They work perfectly with the displays we stock in the adafruit shop and make adding a bright display trivial. Led matrices like these are ‘multiplexed’, so to control all the seven-segment leds you need 14 pins. We even wrote very nice libraries for the backpacks so you can get running in under half an hour, displaying numbers on the 7-segment for either arduino or raspberry pi.

 

Solu 74HC595 8Bit 8-Digit LED Display Module Red Digital Tube 036 for Arduino PCB Board 8 Digital Seven-Segment Displays 595 Driver Module #ad

Solu 74HC595 8Bit 8-Digit LED Display Module Red Digital Tube 0.36″ for Arduino// PCB Board 8 Digital Seven-Segment Displays 595 Driver Module

Solu 74HC595 8Bit 8-Digit LED Display Module Red Digital Tube 0.36″ for Arduino// PCB Board 8 Digital Seven-Segment Displays 595 Driver Module #ad - Using two 595-driven digital control,product name 8 digital display module. About us , professional factory of circuit boards for arduino, welcome to our store for more choices with best price what we pursue is your satisfication of our service, not just for our goodsfor any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund we will reply you about any question you ask within 24 hours. 3-way needed microcontroller io port,. Wide operating voltage 33v to 5v£». Usually, you will get it actually in 9~19 days, if you are in the usa and the item is not fulfilled by amazon the item will be sent to you by usps with shipping information from china the estimated delivery time offered by amazon is not the real time your patience is highly appreciated hope you will receive your item soon and enjoy using it.

 

Vintage Huge Big VFD 7-segment Display ILC1-17 NOS #ad

Vintage Huge Big VFD 7-segment Display ILC1-1/7 NOS

Vintage Huge Big VFD 7-segment Display ILC1-1/7 NOS #ad - Filament, consumption of current (nominal), ma 120-220. Constancy summary current anodes-segments, ma 70-100. Rated (nominal) voltage of filament, u 4. Rated (nominal) voltage of anodes-segments and grid, u 22-24v. Rated current of grid , ma 35-80. 5v. 2-5. Brightness , kd/m 600. Parameter ilc1-1/7 number of segments in sign, 7.

 

ST18S TrafficGuardian Radar Feedback Sign 18 Display Amber 7-Segment Display with 60 Watt Solar Panel #ad

ST18S TrafficGuardian Radar Feedback Sign, 18″ Display, Amber 7-Segment Display, with 60 Watt Solar Panel

ST18S TrafficGuardian Radar Feedback Sign, 18″ Display, Amber 7-Segment Display, with 60 Watt Solar Panel #ad - 60 watt solar panel for increased battery life. The trafficguardian st18s series trailer mounted trailer mounted radar speed signs offers 24 hour reliable traffic monitoring in problem zones. 18″ tall ultra bright led’s visible up to 1,000′. Flashing over speed violation alert with high speed cut off & optional “slow down” text. Fold down speed sign for storage with gas spring lift assist.

 

4 Digit 7 Segment Large Display - Red #ad

4 Digit 7 Segment Large Display – Red

4 Digit 7 Segment Large Display – Red #ad - 3-way needed microcontroller io port,. About us , professional factory of circuit boards for arduino, welcome to our store for more choices with best price what we pursue is your satisfication of our service, not just for our goodsfor any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund we will reply you about any question you ask within 24 hours. Wide operating voltage 33v to 5v£». Usually, you will get it actually in 9~19 days, if you are in the usa and the item is not fulfilled by amazon the item will be sent to you by usps with shipping information from china the estimated delivery time offered by amazon is not the real time your patience is highly appreciated hope you will receive your item soon and enjoy using it. Using two 595-driven digital control,product name 8 digital display module.

 

7 Segment Display - Red CA #ad

7 Segment Display – Red (CA)

7 Segment Display – Red (CA) #ad - Peak forward current per segment80 ma operating temperature range-20 ¡ãc ¨c 80 ¡ãc datasheet. Easy to assemble rohs compliant esd 2000 v free style display diameter 20 mm power dissipation per segment 45 mw reverse voltage per segment5 v forward voltage per segment108 v (i = 20 ma) continuous forward current per segment25 ma.

 

10 254mm Single Digit 7 Segment Blue LED Display Black Face Common Cathode Pack of 3 #ad

1.0″ (25.4mm) Single Digit 7 Segment Blue LED Display, Black Face, Common Cathode (Pack of 3)

1.0″ (25.4mm) Single Digit 7 Segment Blue LED Display, Black Face, Common Cathode (Pack of 3) #ad - Super bright blue led display, low current operation 10ma-20ma. Min required vf = 60v to 65v (there are 2 blue led in series). Output voltage to light up each segment is 60v-65v with max current load of 20ma per segment. 3 pcs 10″ single digit blue led display in common cathode. If low or dim light, your using incorrect power supply / led driver.

 

COMS Logic IC 4026 5 Pieces DIP PackageCMOS Decade CounterDivider with Decoded 7-Segment Display Outputs and Display Enable #ad

COMS Logic IC 4026 5 Pieces DIP Package.CMOS Decade Counter/Divider with Decoded 7-Segment Display Outputs and Display Enable

COMS Logic IC 4026 5 Pieces DIP Package.CMOS Decade Counter/Divider with Decoded 7-Segment Display Outputs and Display Enable #ad - Manufacturer ti if ti out if stock will sent st or philips (nxp) these manufacturers ic are compatible if you have a special brand requirements please before buying contact us. Coms logic ic 4026. Dip package. 100% new rohs compliant. Quantity 5 pieces per lot.

 

5 Pcs 74LS47 SN74LS47N DIP-16 BCD TO 7-SEGMENT DECODERDRIVER for Common Anode Digital Display Tube #ad

5 Pcs 74LS47 SN74LS47N DIP-16 BCD TO 7-SEGMENT DECODER/DRIVER for Common Anode Digital Display Tube

5 Pcs 74LS47 SN74LS47N DIP-16 BCD TO 7-SEGMENT DECODER/DRIVER for Common Anode Digital Display Tube #ad - Bcd to 7-segment common anode decoder / driver. Supply voltage range 475v to 525v. New and original ,quality ensured , no-hassle refund if you are not 100% satisfied. Ic applications driving common anode leds, incandescent indicators. Dip-16 ,package of 5 pcs.

 

Adafruit 12 4-Digit 7-Segment Display wI2C Backpack - Yellow ADA1269 #ad

Adafruit 1.2″ 4-Digit 7-Segment Display w/I2C Backpack – Yellow [ADA1269]

Adafruit 1.2″ 4-Digit 7-Segment Display w/I2C Backpack – Yellow [ADA1269] #ad - If you’ve been ey. The backpacks use a driver chip that does all the heavy lifting for you they have a built in clock so they multiplex the display. They work perfectly with the displays we stock in the adafruit shop and make adding a bright display trivial. The product kit comes witha fully tested and assembled led backpack ultra-bright 4-digit 1. They use constant-current drivers for ultra-bright, consistent color (the images above are photographed at the dimmest setting to avoid overloading our camera), 1/16 step display dimming, all via a simple i2c interface. We even wrote very nice libraries for the backpacks so you can get running in under half an hour, displaying numbers on the 7-segment for either arduino or raspberry pi. Here at adafruit we feel your pain after all, wouldn’t it be awesome if you could control a matrix without tons of wiring that’s where these adorable led matrix backpacks come in. That’s a lot of pins, and there are driver chips like the max7219 that can control a matrix for you but there’s a lot of wiring to set up and they take up a ton of space. Of course, in classic adafruit fashion, we also have a detailed tutorial showing you how to solder, wire and control the display. We have them for a variety of 8×8 and 7-segment displays. 2″ tall yellow seven-segment display 5-pin headera bit of soldering is required to attach the matrix onto the backpack but its very easy to do and only takes about 5 minutes. Led matrices like these are ‘multiplexed’, so to control all the seven-segment leds you need 14 pins. What’s better than a single led lots of leds a fun way to make a numeric display is to use a 4-digit 7-segment display. The backpacks come with address-selection jumpers so you can connect up to eight 7-segments (or a combination, such as four mini 8×8’s and four 7-segments, etc) on a single i2c bus.

 

7 Segment Display High Brightness Red 1-Digit Common Anode10PCS #ad

7 Segment Display High Brightness Red 1-Digit Common Anode(10PCS)

7 Segment Display High Brightness Red 1-Digit Common Anode(10PCS) #ad - Dimensions 0. 47 in x 0. 75 in x 0. 78 ozpacking list10 x seven segment displays. 55 in weight 0.

 

10Pcs Common Cathode 10 Pin 1 Bit 7 Segment 05 Red LED Display Digital Tube #ad

10Pcs Common Cathode 10 Pin 1 Bit 7 Segment 0.5″ Red LED Display Digital Tube

10Pcs Common Cathode 10 Pin 1 Bit 7 Segment 0.5″ Red LED Display Digital Tube #ad - Size(no include pin) 19 x 13 x 7mm/07″ x 05″ x 03″ (lwh)digital tube height 127mm/05″. Emitted color redpin number 10pin pitch 2mm/008″. Net weight 23gpackage content 10 x led digital tube. Product name led digital tubemodel ld-1106astype common cathode working voltage dc 18-2v current under or equals 20ma. Material plastic, metalcolor black, white.

 

Adafruit 056 4-digit 7-segment Display Wi2c Backpack - Red #ad

Adafruit 0.56″ 4-digit 7-segment Display W/i2c Backpack – Red

Adafruit 0.56″ 4-digit 7-segment Display W/i2c Backpack – Red #ad - What’s better than a single led lots of leds a fun way to make a small display is to use an 8×8 matrix or a 4-digit 7-segment display. If you’ve been eyeing matrix displays but hesitated because of the complexity, this is the solution you’ve been looking for. The product kit comes with a fully tested and assembled led backpack ultra-bright 4-digit 0. That’s a lot of pins, and there are driver chips like the max7219 that can control a matrix for you but there’s a lot of wiring to set up and they take up a ton of space. Of course, in classic adafruit fashion, we also have a detailed tutorial showing you how to solder, wire and control the display. Here at adafruit we feel your pain after all, wouldn’t it be awesome if you could control a matrix without tons of wiring that’s where these adorable led matrix backpacks come in. 56″ 7-segment. 56″ tall seven-segment display 4-pin header a bit of soldering is required to attach the matrix onto the backpack but its very easy to do and only takes about 5 minutes. They work perfectly with the matrices we stock in the adafruit shop and make adding a bright little display trivial. We have them in two flavors, a mini 8×8 and a 4-digit 0. Matrices like these are ‘multiplexed’, so to control all the seven-segment leds you need 14 pins. We even wrote a very nice library for the backpacks so you can get running in under half an hour, displaying images on the matrix or numbers on the 7-segment.

 

LUMEX LDD-A812RI 080 Dual Digit 7 Segment Display Common Anode 565 nm White Led Display - 14 items #ad

LUMEX LDD-A812RI 0.80″ Dual Digit 7 Segment Display Common Anode 565 nm White Led Display – 14 item(s)

LUMEX LDD-A812RI 0.80″ Dual Digit 7 Segment Display Common Anode 565 nm White Led Display – 14 item(s) #ad - 80″ dual digit 7 segment display common anode 565 nm white led display for more information refer to the specification sheet located in the ‘downloads’ section below the image .

 

AuBreey CJMCU TPIC6C596 8-bit shift register 7-segment displays 7-segment LED #ad

AuBreey CJMCU TPIC6C596 8-bit shift register 7-segment displays 7-segment LED

AuBreey CJMCU TPIC6C596 8-bit shift register 7-segment displays 7-segment LED #ad - Min required vf = 60v to 65v (there are 2 blue led in series). 3 pcs 10″ single digit blue led display in common cathode. Super bright blue led display, low current operation 10ma-20ma. Output voltage to light up each segment is 60v-65v with max current load of 20ma per segment. Cjmcu tpic6c596 8-bit shift register 7-segment display.

 

Texas Instruments CD4026BE CD4026B CD4026 CMOS Decade CounterDivider with Decoded 7-Segment Display Outputs and Display Enable 1 Pack #ad

Texas Instruments CD4026BE CD4026B CD4026 CMOS Decade Counter/Divider with Decoded 7-Segment Display Outputs and Display Enable 1 Pack

Texas Instruments CD4026BE CD4026B CD4026 CMOS Decade Counter/Divider with Decoded 7-Segment Display Outputs and Display Enable 1 Pack #ad - Super bright intensity of 85,000 ucd @ 10ma. Black color background, common cathode (see drawing specifications on left). Operating vf = 33v per segment. Price for pack of 1order unit each 1 clock frequency 16 count maximum 5 counter type decade / divider logic case style dip msl, no of pins 16 operating temperature max 125 operating temperature min -55 packaging each svhc no svhc (17-dec-2014) supply voltage max 18 supply voltage min 3 supply voltage range 3v to 18v. Emitting color ingan white 6500k, white diffused segment.

 

10 254mm Single Digit 7 Segment Blue LED Display Black Face Common Cathode Pack of 3 #ad

1.0″ (25.4mm) Single Digit 7 Segment Blue LED Display, Black Face, Common Cathode (Pack of 3)

1.0″ (25.4mm) Single Digit 7 Segment Blue LED Display, Black Face, Common Cathode (Pack of 3) #ad - Operating vf = 60v-68v per segment, except decimal point (dp) vf = 33v. Emitting color ingan blue 465nm, white diffused segment. 3 pcs 10″ single digit blue led display. Super bright intensity of 75,000 ucd @ 10ma. Black color background, common cathode (see drawing specifications on left).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.