18 Coolest Straight Shank Collets

 

Techniks 12 Shank690 Gage LengthER16 Collet22mm Clamping Nut DiaMini ER Straight Shank Collet Chuck #ad

Techniks 1/2″ Shank,6.90″ Gage Length,ER16 Collet,22mm Clamping Nut Dia.,Mini ER Straight Shank Collet Chuck

Techniks 1/2″ Shank,6.90″ Gage Length,ER16 Collet,22mm Clamping Nut Dia.,Mini ER Straight Shank Collet Chuck #ad - Net weight 263gpackage content 1 x straight collet chuck. Material metalcolor silver tone , blackshank dia 20mm/ 08′. Shank hole inner dia 12mm/ 047’shank length 100mm/ 4’nut hole dia 13mm/ 05′. Techniks 1/2″ shank,690″ gage length,er16 collet,22mm clamping. Hex width 25mm/ 1’overall size 135 x 28 mm / 5′ x 11′ (lmaxd).

 

Lyndex 018-EXT 180DA Series Straight Shank Collet Chuck Extension 364 - 34 Collet Range 1-14 Diameter x 490 Length #ad

Lyndex 018-EXT 180DA Series Straight Shank Collet Chuck Extension, 3/64″ – 3/4″ Collet Range, 1-1/4″ Diameter x 4.90″ Length

Lyndex 018-EXT 180DA Series Straight Shank Collet Chuck Extension, 3/64″ – 3/4″ Collet Range, 1-1/4″ Diameter x 4.90″ Length #ad - Quick and easy set-up. At3 or better taper. Measures 1-1/4-inches diameter by 4. Da collet chucks are therefore not warranted against cracking. Ideal for drilling and reaming. 90-inches length. Ground surface for perpendicular contact between retention knob and holder. Minimal tir. Da collet chucks are not designed for milling and can crack at the nose when overtightened or radial load is applied. 3/64-inches, 3/4-inches collet range. Lyndex 180da series collet chuck extension equipped with a left-hand-threaded stop screw and chuck nut. Speed up to 10,000 rpm.

 

Centaur RDA100100 Straight-Shank Collet Chucks RDAN100 Nut DA100 Series 1 DA 100 #ad

Centaur RDA100100 Straight-Shank Collet Chucks, RDAN100 Nut, DA100 Series, 1″ DA 100

Centaur RDA100100 Straight-Shank Collet Chucks, RDAN100 Nut, DA100 Series, 1″ DA 100 #ad - Chucks come with nut. Precision straight shank da collet chuck. Wrenches are sold separately.

 

Collet Chuck ER-11 Straight Shank Professional Grade #ad

Collet Chuck, ER-11, Straight Shank, Professional Grade

Collet Chuck, ER-11, Straight Shank, Professional Grade #ad - Er-11 collets have a range of 1/32″ to 1/4″ (0. 5 to 7. 0 mm). This er-11 straight shank collet chuck is a great tool for holding small end mills and engravers.

 

Toolcool C20-ER32-50L 20mm Diameter CNC Arbor Straight Shank Collet Chuck Holder Tool #ad

Toolcool C20-ER32-50L 20mm Diameter CNC Arbor Straight Shank Collet Chuck Holder Tool

Toolcool C20-ER32-50L 20mm Diameter CNC Arbor Straight Shank Collet Chuck Holder Tool #ad - -Do not air lock (not inserted in the chuck holder). -Use the correct wrench device, can not be arbitrarily changed so as not to cause damage. -Do not use the rod with a notch or a plane of the cnc cutting tools. -Cnc tool placement collet, must go beyond the collet hole effective clamping length, to avoid improper locking, resulting in the loss of. Modelc20-er32-50l materialshigh-carbon steel shank diameter20mm typemilling tool applicable machine toolslathe note -due to the manual measurement,there might be some error. Package included 1 x collet chuck holder.

 

DN C32-ER32-100L Straight Shank Collet Chuck Toolholder for CNC Lathe Milling #ad

DN C32-ER32-100L Straight Shank Collet Chuck Toolholder for CNC Lathe Milling

DN C32-ER32-100L Straight Shank Collet Chuck Toolholder for CNC Lathe Milling #ad - Note£ºthe color of the item may vary slightly due to photography and your own computer features brand new straight shank c25-100mm er32 collet milling chuck holder. Shank diameter 32mm shank length 100mm weight 910g package includes 1 x straight shank chuck.

 

Lyndex 010-EXT-S 100DA Series Straight Shank Collet Chuck Extension 364 - 916 Collet Range 1 Diameter x 744 Length #ad

Lyndex 010-EXT-S 100DA Series Straight Shank Collet Chuck Extension, 3/64″ – 9/16″ Collet Range, 1″ Diameter x 7.44″ Length

Lyndex 010-EXT-S 100DA Series Straight Shank Collet Chuck Extension, 3/64″ – 9/16″ Collet Range, 1″ Diameter x 7.44″ Length #ad - Minimal tir. Measures 1-inches diameter by 7. Da collet chucks are not designed for milling and can crack at the nose when overtightened or radial load is applied. Quick and easy set-up. Speed up to 10,000 rpm. 44-inches length. Da collet chucks are therefore not warranted against cracking. Lyndex 100da series collet chuck extension equipped with a left-hand-threaded stop screw and chuck nut. At3 or better taper. 3/64-inches, 9/16-inches collet range. Ground surface for perpendicular contact between retention knob and holder. Ideal for drilling and reaming.

 

Lyndex E20-EXT-100 ER20 Straight Shank Collet Chuck Extension 0039 - 0511 Collet Range 1 Diameter x 640 Length #ad

Lyndex E20-EXT-100 ER20 Straight Shank Collet Chuck Extension, 0.039″ – 0.511″ Collet Range, 1″ Diameter x 6.40″ Length

Lyndex E20-EXT-100 ER20 Straight Shank Collet Chuck Extension, 0.039″ – 0.511″ Collet Range, 1″ Diameter x 6.40″ Length #ad - Lyndex er20 straight shank collet chuck extension comes with back-up screw. 511-inches collet range. 40-inches length. Measures 1-inches diameter by 6. 039-inches, 0.

 

WEONE Replacement Silver C12 ER8M 150L CNC Straight Shank Collet Chuck Wrench Extension Tools For Milling Lathe #ad

WEONE Replacement Silver C12 ER8M 150L CNC Straight Shank Collet Chuck Wrench Extension Tools For Milling Lathe

WEONE Replacement Silver C12 ER8M 150L CNC Straight Shank Collet Chuck Wrench Extension Tools For Milling Lathe #ad - It is more safe and convenient to use specifications shank diameter approx. Note the color of the item may vary slightly due to photography and your own computer straight extended shank, long shank fit for deep processing, resolve the needs of to extend the depth of processing. 12mm shank length 150mm wrench length 76mm weight175g package included 1 x shank + wrench. It can reduce the use of extension tools, which can reduce costs and improve efficiency extension rod diameter and the other parts are precision ground to eliminate unbalance, increase safety when cutting.

 

CNC Lather Milling Straight Shank Collet Chuck Holder C12-ER16A-100L Extension Rod 12mm047 x 100mm4 #ad

CNC Lather Milling Straight Shank Collet Chuck Holder C12-ER16A-100L Extension Rod 12mm/0.47″ x 100mm/4″

CNC Lather Milling Straight Shank Collet Chuck Holder C12-ER16A-100L Extension Rod 12mm/0.47″ x 100mm/4″ #ad - Extension rod diameter and the other parts are precision ground to eliminate imbalances, increased stability during cutting, tighten the nut directly, high rigidity, extremely powerful clamping force. Features the chuck holder is made of quality metal material, high hardness, strong and durable. Suitable for milling machine to improve the hardness and endurance of the surface. Excellent level products, prices are more affordable. Package included 1 x chuck holder. A good replacement part for your old one. Specifications condition 100% brand new material metal type c12-er16a-100l (including nuts) clamp handle outer thread diameter 12mm designed with collet model er16 (folder knife range 1mm-10mm) rod length approx. 3 you can reduce the use of extension tools, which can reduce costs and improve efficiency. 6cm / 5inch package weight 170g usage 1 first clip the headgear into the nut, then tighten directly, holding strong. 2 straight shank type extended handle, the handle body longer apply deep processing, solving the need to extend the depth of processing. 4 extension rod diameter, and the other parts are precision grinding, can eliminate unbalance, increased safety when cutting. C12-er16a-100l collet straight shank chuck holder cnc milling tool extension lathe rod useful description straight shank type extended handle, the handle body longer apply deep processing, solving the need to extend the depth of processing. You can reduce the use of extension tools, which can reduce costs and improve efficiency. C12-er16a-100l (including nuts) straight collet chuck holder cnc milling lathe collet. 12. Great processing and fine making.

 

C32-ER32-100L Straight Shank Collet Chuck CNC Milling Extension Rod #ad

C32-ER32-100L Straight Shank Collet Chuck CNC Milling Extension Rod

C32-ER32-100L Straight Shank Collet Chuck CNC Milling Extension Rod #ad - Material carbon steelcolor silver tone, black. Product name straight collet chuckmodel c32-er32-100l. Net weight 775gpackage content 1 x straight collet chuck. Shank diameter 32 mm / 126″clamping diameter 27 mm / 1″. Thread diameter 22 mm / 087″overall size 148 x 50 mm / 58″ x 2″ (lmaxd).

 

MT4-ER32-M16 Straight Shank Collet Chuck CNC Mill Holder Extension Rod #ad

MT4-ER32-M16 Straight Shank Collet Chuck CNC Mill Holder Extension Rod

MT4-ER32-M16 Straight Shank Collet Chuck CNC Mill Holder Extension Rod #ad - Package content 1 x straight collet chuck. Product name straight collet chuckmodel mt4-er32-m16. Shank diameter 32mm / 126″clamping diameter range 2-20mm. Overall size 165 x 50 mm / 65″ x 2″ (lmaxd)material carbon steel. Color silver tone, blacknet weight 1052g.

 

Lyndex E25-EXT-100 ER25 Straight Shank Collet Chuck Extension 0039 - 0629 Collet Range 1 Diameter x 600 Length #ad

Lyndex E25-EXT-100 ER25 Straight Shank Collet Chuck Extension, 0.039″ – 0.629″ Collet Range, 1″ Diameter x 6.00″ Length

Lyndex E25-EXT-100 ER25 Straight Shank Collet Chuck Extension, 0.039″ – 0.629″ Collet Range, 1″ Diameter x 6.00″ Length #ad - 00-inches length. Lyndex er25 straight shank collet chuck extension comes with back-up screw. 039-inches, 0. Measures 1-inches diameter by 6. 629-inches collet range.

 

C34 ER16 6 Straight Shank Collet Chuck Holder Extention Drill Holder Chrome Molybdenum Alloy Steel #ad

C3/4 ER16 6″ Straight Shank Collet Chuck Holder Extention Drill Holder Chrome Molybdenum Alloy Steel

C3/4 ER16 6″ Straight Shank Collet Chuck Holder Extention Drill Holder Chrome Molybdenum Alloy Steel #ad - Overall length 186mm / 73 inch. Shank diameter 19mm / 3/4 inch. Shank length 150mm / 6 inch. Material chrome molybdenum alloy steel. Straight shank type extended handle, the handle body was longer, applicable to deep hole processing, resolve to extend the depth of processing needs.

 

DN Straight Shank Collet Chuck Toolholder CNC Handle C16-ER11-M50L Reduce Costs #ad

DN Straight Shank Collet Chuck Toolholder CNC Handle C16-ER11-M50L Reduce Costs

DN Straight Shank Collet Chuck Toolholder CNC Handle C16-ER11-M50L Reduce Costs #ad - 5mm shank length 74mm weight 80g package included 1 x shank. Note the color of the item may vary slightly due to photography and your own computer straight extended shank, long shank fit for deep processing, resolve the needs of to extend the depth of processing. Specifications shank diameter 8. It can reduce the use of extension tools, which can reduce costs and improve efficiency extension rod diameter and the other parts are precision ground to eliminate unbalance, increase safety when cutting.

 

DN C20-ER20M-100L Straight Shank Collet Chuck Holder for CNC Lathe Milling #ad

DN C20-ER20M-100L Straight Shank Collet Chuck Holder for CNC Lathe Milling

DN C20-ER20M-100L Straight Shank Collet Chuck Holder for CNC Lathe Milling #ad - 20mm shank length 100mm wrench length 135mm package includes 1 x straight shank + wrench. Note£ºthe color of the item may vary slightly due to photography and your own computer features shank diameter approx.

 

Lyndex E16-EXT-750 ER16 Straight Shank Collet Chuck Extension 0019 - 0406 Collet Range 34 Diameter x 589 Length #ad

Lyndex E16-EXT-750 ER16 Straight Shank Collet Chuck Extension, 0.019″ – 0.406″ Collet Range, 3/4″ Diameter x 5.89″ Length

Lyndex E16-EXT-750 ER16 Straight Shank Collet Chuck Extension, 0.019″ – 0.406″ Collet Range, 3/4″ Diameter x 5.89″ Length #ad - 89-inches length. 019-inches, 0. 406-inches collet range. Measures 3/4-inches diameter by 5. Lyndex er16 straight shank collet chuck extension it uses a er11-3 back up screw.

 

COLLIS ER Series Straight Shank Collet Holder - Taper 1 Straight Shank COLLET SIZE ER-32 #ad

COLLIS ER Series Straight Shank Collet Holder – Taper: 1″ Straight Shank COLLET SIZE: ER-32

COLLIS ER Series Straight Shank Collet Holder – Taper: 1″ Straight Shank COLLET SIZE: ER-32 #ad - Made in usa. Comes complete with locknut and back-up screw. Overall length 423″. Made from high grade alloy steel. Shank diameter 1″.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.