17 Top 1 Morse Tapers

 

5148 X 1 MORSE TAPER SHANKX 2 X 8 6 STRAIGHT FLUTE CHUCKING REAMER

.5148 X #1 MORSE TAPER SHANKX 2″ X 8″ 6 STRAIGHT FLUTE CHUCKING REAMER

.5148 X #1 MORSE TAPER SHANKX 2″ X 8″ 6 STRAIGHT FLUTE CHUCKING REAMER - Our part # all-41345. 5/16″ #1 morse taper (mt) collet. Hardened and precision ground drawbar end 1/4″-20. Made of high grade tool steel.

 

Seller RESHARPENED 49091 Morse Taper HSS 8 Straight Flute RHC 2 LOC X 8 OAL Chucking Reamer

Seller RESHARPENED .4909#1 Morse Taper HSS 8 Straight Flute RHC 2″ LOC X 8″ OAL Chucking Reamer

Seller RESHARPENED .4909#1 Morse Taper HSS 8 Straight Flute RHC 2″ LOC X 8″ OAL Chucking Reamer - Accuracy 0000394″ morse taper 3” length size 5” bottom diameter 5/8” center point 60 degree. Bearing steel hardened and ground high quality dead center. 3mt carbide lathe dead point center no1 morse taper #3 60 degree point.

 

Morse Cutting Tools 22955 Expansion Reamer High-Speed Steel Bright Finish Straight Flute 1 Morse Taper Shank 6 Flutes 916 Size

Morse Cutting Tools 22955 Expansion Reamer, High-Speed Steel, Bright Finish, Straight Flute, 1 Morse Taper Shank, 6 Flutes, 9/16″ Size

Morse Cutting Tools 22955 Expansion Reamer, High-Speed Steel, Bright Finish, Straight Flute, 1 Morse Taper Shank, 6 Flutes, 9/16″ Size - Not to be used as an adjustable reamer for producing different hole sizes. Expansion reamers are expandable to permit many regrinds to the original reamer size. Recommended for reaming a wide range of materials. Expansion feature is for expansion and regrind to the original reamer size only. Expansion screw should never be loosened to achieve a smaller reamer size.

 

LFA  Reichel Hardware 1MT33 1 Morse Taper by J33 Arbor Chrome

LFA / Reichel Hardware 1MT33 1 Morse Taper by J33 Arbor, Chrome

LFA / Reichel Hardware 1MT33 1 Morse Taper by J33 Arbor, Chrome - Ground on centers to give the most accuracy between the drill chuck and machine tool. Guaranteed to run true and balanced. Material is high grade steel and 100% hardened for long life. Press fit jacobs taper, to ensure a non slip fit with drill chuck. Made in france. Morse taper end has tang to prevent slippage.

 

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit 1 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 2764 Size Pack of 1

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 27/64″ Size (Pack of 1)

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 27/64″ Size (Pack of 1) - 27/64-inches size. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. 118 degrees conventional point. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit 1 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 532 Size Pack of 1

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 5/32″ Size (Pack of 1)

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 5/32″ Size (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 118 degrees conventional point. 5/32-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters.

 

Michigan Drill 210C Series Heavy Duty Super Cobalt Steel Drill Bit 1 Morse Taper Shank Spiral Flute 135 Degrees Notched Point 516 Size Pack of 1

Michigan Drill 210C Series Heavy Duty Super Cobalt Steel Drill Bit, 1 Morse Taper Shank, Spiral Flute, 135 Degrees Notched Point, 5/16″ Size (Pack of 1)

Michigan Drill 210C Series Heavy Duty Super Cobalt Steel Drill Bit, 1 Morse Taper Shank, Spiral Flute, 135 Degrees Notched Point, 5/16″ Size (Pack of 1) - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 5/16-inches size. 135 degrees split/notched point.

 

716 MIKED 4377X 1 MORSE TAPER SHANK X 1-34 X 7 6 STRAIGHT FLUTE RIGHT HAND CUT HSS CHUCKING REAMER

7/16 MIKED .4377X #1 MORSE TAPER SHANK X 1-3/4 X 7″ 6 STRAIGHT FLUTE RIGHT HAND CUT HSS CHUCKING REAMER

7/16 MIKED .4377X #1 MORSE TAPER SHANK X 1-3/4 X 7″ 6 STRAIGHT FLUTE RIGHT HAND CUT HSS CHUCKING REAMER - New old stock 7/16 miked. 4377 od diameter x #1 morse taper shank x 1-3/4 loc x 7″ overall length 6 straight flute right hand cut hss chucking reamer.

 

12 Expanding Arbor with 1 Morse Taper Shank

1/2″ Expanding Arbor with #1 Morse Taper Shank

1/2″ Expanding Arbor with #1 Morse Taper Shank - Expanding machinable arbor working diameter is 1/2″ (. 500) designed to expand up to. Made from 12l14 soft machinable steel. 010 inches working length is 2-5/8 inches mounting shank is #1 morse taper with a 1/4-20″internal thread for draw bars.

 

5 PC 1 MORSE TAPER COLLET SET 116 TO 516 1MT MT1 18 316 14 ROUND

5 PC #1 MORSE TAPER COLLET SET 1/16″ TO 5/16″ 1MT MT1 1/8″ 3/16″ 1/4″ ROUND

5 PC #1 MORSE TAPER COLLET SET 1/16″ TO 5/16″ 1MT MT1 1/8″ 3/16″ 1/4″ ROUND - Our part # all-41340. Made of high grade tool steel. 1/16″ thru 5/16″ x 16ths 5 pc #1 morse taper (mt) collet set (includes 2 each- 1/16″, 1/8″, 3/16″, 1/4″, 5/16″ collets). Hardened and precision ground drawbar end 1/4″-20.

 

516 1 MORSE TAPER COLLET HIGH PRECISION 1MT MT1 ROUND CHUCK LATHE

5/16″ #1 MORSE TAPER COLLET HIGH PRECISION 1MT MT1 ROUND CHUCK LATHE

5/16″ #1 MORSE TAPER COLLET HIGH PRECISION 1MT MT1 ROUND CHUCK LATHE - Made of high grade tool steel. 5/16″ #1 morse taper (mt) collet. Hardened and precision ground drawbar end 1/4″-20. Our part # all-41345.

 

Morse Cutting Tools 22952 Expansion Reamer High-Speed Steel Bright Finish Straight Flute 1 Morse Taper Shank 6 Flutes 716 Size

Morse Cutting Tools 22952 Expansion Reamer, High-Speed Steel, Bright Finish, Straight Flute, 1 Morse Taper Shank, 6 Flutes, 7/16″ Size

Morse Cutting Tools 22952 Expansion Reamer, High-Speed Steel, Bright Finish, Straight Flute, 1 Morse Taper Shank, 6 Flutes, 7/16″ Size - Expansion feature is for expansion and regrind to the original reamer size only. Expansion reamers are expandable to permit many regrinds to the original reamer size. Recommended for reaming a wide range of materials. Expansion screw should never be loosened to achieve a smaller reamer size. Not to be used as an adjustable reamer for producing different hole sizes.

 

Michigan Drill 210C Series Heavy Duty Super Cobalt Steel Drill Bit 1 Morse Taper Shank Spiral Flute 135 Degrees Notched Point 932 Size Pack of 1

Michigan Drill 210C Series Heavy Duty Super Cobalt Steel Drill Bit, 1 Morse Taper Shank, Spiral Flute, 135 Degrees Notched Point, 9/32″ Size (Pack of 1)

Michigan Drill 210C Series Heavy Duty Super Cobalt Steel Drill Bit, 1 Morse Taper Shank, Spiral Flute, 135 Degrees Notched Point, 9/32″ Size (Pack of 1) - 9/32-inches size. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. 135 degrees split/notched point. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit 1 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1164 Size Pack of 1

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 11/64″ Size (Pack of 1)

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 1 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 11/64″ Size (Pack of 1) - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 118 degrees conventional point. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. 11/64-inches size.

 

Llambrich Shank 1 Morse Taper to Jacobs Taper 3 Arbor

Llambrich Shank 1 Morse Taper to Jacobs Taper 3 Arbor

Llambrich Shank 1 Morse Taper to Jacobs Taper 3 Arbor - The arbor is an intermediary gripping element between the drill chuck (type cks, sp and spx) and the spindle of the machine. Mt1 morse taper shank. Maximum concentricity. Llambrich arbor is totally hardened and precision ground, ensuring a close fit. Taper shank arbors for drill chucks.

 

14mm Machine Carbide Tip MT 1 Morse Taper Shank Milling Reamer

14mm Machine Carbide Tip MT 1 Morse Taper Shank Milling Reamer

14mm Machine Carbide Tip MT 1 Morse Taper Shank Milling Reamer - 14mm machine carbide tip mt 1 morse taper shank milling reamer. 3 flutes (different than picture). Tool diameter tolerance +001″/-0″. 1/4″ tool diameter, 114″ minimum cut diameter, 3/32″ diamter pilot hole, #1 mts. For counterboring most types of materials.

 

New MT1 Heavy Duty Live Center Morse Taper 1MT Triple Bearing Lathe Medium Duty CNC

New MT1 Heavy Duty Live Center Morse Taper 1MT Triple Bearing Lathe Medium Duty CNC

New MT1 Heavy Duty Live Center Morse Taper 1MT Triple Bearing Lathe Medium Duty CNC - The outer wall is designed with integral edging and does not use knurling to protect the inner bearin. #1 morse taper (1mt) shank, 60-degree point. Great for high speed turning, cnc work. Made of precision ground hardened steel for high accuracy. 00002″ concentricity.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.