17 Greatest Chemglas

 

CHEMGLA - Clamp- Small- Three-Prong Extension-SS  EA1

CHEMGLA – Clamp- Small- Three-Prong Extension-SS , EA1

CHEMGLA – Clamp- Small- Three-Prong Extension-SS , EA1 - Available only with dual adjustment. Clamps, dual adjustment, three-prong extension, stainless steel similar to the cg-9205 except made of stainless steel with electro-polished finish.

 

CHEMGLA - Adapter- Flow Control- 2942- Teflon Stopcock  EA1

CHEMGLA – Adapter- Flow Control- 29/42- Teflon Stopcock , EA1

CHEMGLA – Adapter- Flow Control- 29/42- Teflon Stopcock , EA1 - Adapters, flow control, ptfe stopcock, 90° used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm. Of 14mm. D. Hose connection has an o. D. Of 8mm at the middle serration with the exception of cg-1030-45 which has an o.

 

CHEMGLA - ADAPTER- TEFLON- THERMOCOUPLE- PERFLUORO ORING- 24 40 Joint Size- 18 Thermometer Size- 006 Upper EA1

CHEMGLA – ADAPTER- TEFLON- THERMOCOUPLE- PERFLUORO ORING- 24 /40 Joint Size- 1/8” Thermometer Size- #006 Upper, EA1

CHEMGLA – ADAPTER- TEFLON- THERMOCOUPLE- PERFLUORO ORING- 24 /40 Joint Size- 1/8” Thermometer Size- #006 Upper, EA1 - Adapter design permits use with cg-145 keck clips. Adapter has an outer perfluoro o-ring to form a grease-free, airtight seal between the adapter and the listed size of outer joint. Adapters, ptfe, thermocouple, perfluoro oring ptfe adapter for use with either 1/8″ or 1/4″ thermocouples. The compression nut works in conjunction with the upper perfluoro o-ring to provide a airtight seal between the adapter and thermocouple.

 

CHEMGLA - Syringe- Micro- Gas-Tight- Kloehn- 125mL capacity - Teflonr Luer Lock EA1

CHEMGLA – Syringe- Micro- Gas-Tight- Kloehn- 1.25mL capacity – Teflonr Luer Lock, EA1

CHEMGLA – Syringe- Micro- Gas-Tight- Kloehn- 1.25mL capacity – Teflonr Luer Lock, EA1 - Please note ptfe luer tip or luer lock syringes are not supplied with needles. With the exacting tolerances held in the manufacture of these syringes, all components are interchangeable within each size range. For needles see cg-3075. Fixed and removable needle syringes are supplied with needles that are 2″ long with point style “a” (22° bevel). Available in capacities from 5ul to 50ml with a choice of the listed end terminations. Syringes, micro, gas-tight syringes are designed for use in both liquid and gas chromatography. Due to the all-ptfe tip, they can also handle highly corrosive or ultra-pure liquids.

 

CHEMGLA - GL-45 Cap w 34mm Aperture  EA1

CHEMGLA – GL-45 Cap w/ 34mm Aperture , EA1

CHEMGLA – GL-45 Cap w/ 34mm Aperture , EA1 - Gl caps with aperture open top cap for use with gl screw threads. The cap combined with the cg-197 sealing ring will accommodate tubing of the listed diameter. Cap is made from pbt (thermoplastic polyester) and will withstand temperatures from -45 to 200° c.

 

CHEMGLA - Stir Bar- Magnetic- Egg Shaped- 1-58 x 34- Designed for use in round Bot vessels- it is shape EA1

CHEMGLA – Stir Bar- Magnetic- Egg Shaped- 1-5/8” x 3/4”- Designed for use in round Bot vessels- it is shape, EA1

CHEMGLA – Stir Bar- Magnetic- Egg Shaped- 1-5/8” x 3/4”- Designed for use in round Bot vessels- it is shape, EA1 - See cg-2005-20 for stir bar kit. Designed for use in round bottom vessels, it is shaped to spin freely, unrestricted by the vessel contour. Stir bars, magnetic, ptfe, egg-shaped egg-shaped magnetic stirring bar provides its own pivot point without separate ring or abrupt change in contour.

 

CHEMGLA - Cabinet- Dry-Keeper- Electric- Desiccator - CANNO T BE RETURNED wOUT ITS ORIGINAL PACKAGE EA1

CHEMGLA – Cabinet- Dry-Keeper- Electric- Desiccator – CANNO T BE RETURNED w/OUT ITS ORIGINAL PACKAGE, EA1

CHEMGLA – Cabinet- Dry-Keeper- Electric- Desiccator – CANNO T BE RETURNED w/OUT ITS ORIGINAL PACKAGE, EA1 - The absorption period lasts 4 1/2 hours, indicated by a green pilot light. Cleats allow for 15 levels of shelf placement. The overall dimensions are 12 1/2″ wide x 20″ high x 15 1/4″ deep. The gasketed door has two metal hinges, two latches, and a handle. Door opening is 10″ wide x 17 7/8″ high. These items cannot be returned without their original packaging. After regeneration of the silica gel, this cycle is repeated. The gel is contained in the control section, where it absorbs moisture to maintain a low (30-40%) relative humidity. Dry-keepertm desiccator cabinets molded of methyl-methacrylate, these desiccator cabinets offer a clear view of the cabinet contents. Inside cabinet depth is 13 1/4″. Cabinet includes 3 sets of shelf rails and 3 clear shelves with small vent holes. After this period, the silica gel is regenerated for a 1/2 hour period, indicated by a red pilot light. This cabinet is equipped with a 110v, 6 watt regeneration unit for the silica gel. The electric regeneration unit adds 6 inches to the width of the cabinet. Cabinet comes complete with a dial hygrometer and desiccant tray.

 

CHEMGLA - Cap- 38-415 GPI- Solid- Rubber Liner  PK250

CHEMGLA – Cap- 38-415 G.P.I.- Solid- Rubber Liner , PK250

CHEMGLA – Cap- 38-415 G.P.I.- Solid- Rubber Liner , PK250 - Part numbers cg-191-01 through cg-191-12 are made of black plastic with a choice of white rubber or ptfe liner. I. Part number cg-191-14 is made of blue polypropylene with a detachable ptfe liner. Screw threads. Caps, solid, for gpi screw threads cap for use with cg-190 g. Note caps sold in packages only. P.

 

CHEMGLA - Bottle Boston Round Amber 1000mL32oz 33-400 T hread Size Polyseal Black Cap CS12

CHEMGLA – Bottle, Boston Round, Amber, 1000mL/32oz, 33-400 T hread Size, Polyseal Black Cap, CS12

CHEMGLA – Bottle, Boston Round, Amber, 1000mL/32oz, 33-400 T hread Size, Polyseal Black Cap, CS12 - Supplied with caps attached. Bottle dimensions od x height (mm) 60ml 39 x 94 120ml 48 x 112 250ml 60 x 136 500ml 75 x 168 1000ml 94 x 206. Available with a choice of cap styles, ptfe lined, polyseal, vinyl lined pulp or 14b white lined. Bottles, boston round, amber sturdy bottles for general sample collection and storage. Please note bottles are available plastic coated, without cap and also bulk packed.

 

CHEMGLA - Syringe- Polypropylene- 5mL Luer Lock  PK100

CHEMGLA – Syringe- Polypropylene- 5mL Luer Lock , PK100

CHEMGLA – Syringe- Polypropylene- 5mL Luer Lock , PK100 - The plastic plunger has a smooth draw and positive safety stop to prevent accidental spills. May not be combined with any other offer or discount. To qualify, purchaser must specify promo code cm07215 when placing the order. Syringes ae individually sterile strip packed. Polypropylene syringes with luer tips rules participation in this offer is limited to purchases made in the period from 7/20/2015 through 8/2/2015 of cg-3080- and cg-3081-series polypropylene syringes from chemglass life sciences. This offer is non-transferable and void where prohibited by law or company policy. Offer not valid through distributors. Syringes, polypropylene, luer lock all polypropylene syringes with a luer lock. Valid on us and canadian purchases only. Offer is subject to chemglass life sciences’ standard terms, conditions and contracts.

 

CHEMGLA - Flask- PFA- Round Bot- 500mL- 2932 Outer Joint Single Neck EA1

CHEMGLA – Flask- PFA- Round Bot- 500mL- 29/32 Outer Joint Single Neck, EA1

CHEMGLA – Flask- PFA- Round Bot- 500mL- 29/32 Outer Joint Single Neck, EA1 - Flasks, pfa, round bottom, single neck all pfa single neck round bottom flask with standard taper outer joint. Flask can withstand max temperature of 250°c and a min temperature of -200°c.

 

CHEMGLA - Saddles- Berl- 1000cc- Porcelain- Distilling Colu mn- Approx 1250 PiecesPackage EA1

CHEMGLA – Saddles- Berl- 1000cc- Porcelain- Distilling Colu mn- Approx. 1250 Pieces/Package, EA1

CHEMGLA – Saddles- Berl- 1000cc- Porcelain- Distilling Colu mn- Approx. 1250 Pieces/Package, EA1 - Packing for distilling columns, porcelain berl saddles porcelain berl saddles having an o. Available in packages of 200cc and 1000cc boxes. Ideal for vacuum distillation, absorption and extraction. Of 8mm. Saddles provide a highly useable surface area, lower gas flow resistance and excellent internal distribution. D.

 

CHEMGLA - Heating Mantle- 5000mL- Series M- Spherical- 600 Watts EA1

CHEMGLA – Heating Mantle- 5000mL- Series M- Spherical- 600 Watts, EA1

CHEMGLA – Heating Mantle- 5000mL- Series M- Spherical- 600 Watts, EA1 - Only the bottom of the flask is covered so the contents being heated are fully visible. The mantle is grounded through the aluminum housing and requires a support such as cg-11004 through cg-11008. Mantles, spherical flasks, glas-col the glas-col® series m mantle is the most compact mantle with an aluminum shell that can heat flasks up to 72 liters. All mantles are 115 volt and are supplied with a detachable 4 foot, 3 wire cord. The internal operating temperature is 450° c. Like the series tm, this mantle has a durable aluminum housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain.

 

CHEMGLA - Bottle- Wash- Water- 500mL- Polyethylene  EA1

CHEMGLA – Bottle- Wash- Water- 500mL- Polyethylene , EA1

CHEMGLA – Bottle- Wash- Water- 500mL- Polyethylene , EA1 - Toluene bottle is solid red with white lettering and hazard information. Bottles, washing, safety, polythylene easy-to-read, low-density polyethylene dispensing bottles are break-resistant intended for short-term dispensing use include dot, cas numbers, nfpa codes and symbols, protective equipment symbols, and target organ information easy-to-read, break-resistant dispensing bottles include dot, cas numbers, national fire protection association (nfpa) codes and symbols, protective equipment symbols, and target organ information. Polypropylene nozzle assemblies are leakproof and color-coded to match bottle label.

 

CHEMGLA - Filter Flask- Duran- Replaceable Hose Connection- 5000ml EA1

CHEMGLA – Filter Flask- Duran- Replaceable Hose Connection- 5000ml, EA1

CHEMGLA – Filter Flask- Duran- Replaceable Hose Connection- 5000ml, EA1 - For replacement ppn hose connection sets see cg-1563. Filter flasks, duran®, replaceable hose connections duran® heavy wall filtering flask has a unique removable ppn hose connection. Bottle shaped filter flask, uncoated with removable ppn hose connection. Hose connection is secured to the flask via a silicone rubber seal.

 

CHEMGLA - M16 SS 90° Elbow- Huber- Male to Female  EA1

CHEMGLA – M16 S.S. 90° Elbow- Huber- Male to Female , EA1

CHEMGLA – M16 S.S. 90° Elbow- Huber- Male to Female , EA1 - 90° elbow huber circulator fitting. Adapters, m16 stainless steel 90° elbow, huber circulator fittings m16 s. S.

 

CHEMGLA - Bottles- GLS 80 Thread- Wide Mouth- Grad- Duran- 1000mL CS10

CHEMGLA – Bottles- GLS 80 Thread- Wide Mouth- Grad- Duran- 1000mL, CS10

CHEMGLA – Bottles- GLS 80 Thread- Wide Mouth- Grad- Duran- 1000mL, CS10 - User-friendly screw is specially designed so that it can be rapidly opened and closed with less than two turns. The closure is made of polypropylene and is suitable for autoclaving up to 140°c. All bottles are supplied with a unique quick release closure with integral sealing cone that provides a high quality seal and protects the contents from contamination. Their flexibility and unique design enhance safety and efficiency whether filling or pouring in the laboratory, in the field or in production, whether for sampling, preparation, storage or product packaging. Bottles, gl 80 threads, wide necks, graduated, duran® the duran® gl-80 wide neck bottles offer a versatile solution for laboratory and industrial applications. These sturdy bottles have large base areas making them easy to stack and reduces the risk of toppling. A clicking sound gives positive confirmation that the bottle is firmly closed. They may be used with a large range of contents at reduced, ambient, or high temperatures. Batch certificate and traceability you can call up and print your own personal certificate for complete documentation direct via the internet using the 8-digit retrace code on the bottle.