17 Best Union Butterfields

 

Union Butterfield 1586UNC High-Speed Steel Spiral Flute Tap Uncoated Bright Finish Round Shank With Square End Plug Chamfer 14-20 Thread Size #ad

Union Butterfield 1586(UNC) High-Speed Steel Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, 1/4″-20 Thread Size

Union Butterfield 1586(UNC) High-Speed Steel Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, 1/4″-20 Thread Size #ad - Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. Spiral flute tap design pulls chips back from the tip of the tool and out of the hole to prevent clogging. Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different applications. Spiral flutes for creating threads in blind holes. Round shank with square end allows tap to be used in hand or power-driven applications.

 

Union Butterfield 1585UNF High-Speed Steel Spiral Point Tap Relieved Style Uncoated Bright Finish Round Shank With Square End Plug Chamfer H4 Tolerance 3 Flute 516-24 Thread Size #ad

Union Butterfield 1585(UNF) High-Speed Steel Spiral Point Tap, Relieved Style, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, H4 Tolerance, 3 Flute, 5/16″-24 Thread Size

Union Butterfield 1585(UNF) High-Speed Steel Spiral Point Tap, Relieved Style, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, H4 Tolerance, 3 Flute, 5/16″-24 Thread Size #ad - Spiral point tap with straight flutes for cutting threads in through holes. Spiral point tap pushes chips ahead of tool to reduce clogging. Available in unc (unified coarse) and unf (unified fine) right-hand thread options for different applications. Round shank with square end helps to minimize rotation in the tool holder. Relieved-style design reduces friction between tap and workpiece for reduced tool wear.

 

Union Butterfield 1700M High-Speed Steel Hand Tap Uncoated Bright Finish Round Shank With Square End Plug Chamfer M24-300 Thread Size #ad

Union Butterfield 1700(M) High-Speed Steel Hand Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, M24-3.00 Thread Size

Union Butterfield 1700(M) High-Speed Steel Hand Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, M24-3.00 Thread Size #ad - Produces ansi standard right-hand threads in metric sizes. Hand threading tap with straight flutes cuts threads in through holes and blind holes. High-speed steel is compatible with a variety of materials. Round shank with square end allows tap to be used in hand or power-driven applications. Uncoated (bright) tools have no additional surface treatment or coating, for use on a broad range of materials.

 

Union Butterfield 5110165 High Speed Steel HSS Square Nose End Mill Inch Double End Weldon Shank Uncoated Bright Finish 4 Flutes 35 Overall Length 516 Cutting Diameter 38 Shank Diameter #ad

Union Butterfield 5110165 High Speed Steel (HSS) Square Nose End Mill, Inch, Double End, Weldon Shank, Uncoated (Bright) Finish, 4 Flutes, 3.5″ Overall Length, 5/16″ Cutting Diameter, 3/8″ Shank Diameter

Union Butterfield 5110165 High Speed Steel (HSS) Square Nose End Mill, Inch, Double End, Weldon Shank, Uncoated (Bright) Finish, 4 Flutes, 3.5″ Overall Length, 5/16″ Cutting Diameter, 3/8″ Shank Diameter #ad - Four flutes produce a better finish than fewer flutes. Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. High-speed steel is compatible with a variety of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Union Butterfield 4702 High-Speed Steel Counterbore Interchangeable Pilot Uncoated Bright Finish 316 Pilot Diameter1116 Body Diameter #ad

Union Butterfield 4702 High-Speed Steel Counterbore, Interchangeable Pilot, Uncoated (Bright) Finish, 3/16″ Pilot Diameter,11/16″ Body Diameter

Union Butterfield 4702 High-Speed Steel Counterbore, Interchangeable Pilot, Uncoated (Bright) Finish, 3/16″ Pilot Diameter,11/16″ Body Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.

 

Union Butterfield 727 Tool Bit Blank Cobalt Steel 2-12 Overall Length 316 Size #ad

Union Butterfield 727 Tool Bit Blank, Cobalt Steel, 2-1/2″ Overall Length, 3/16″ Size

Union Butterfield 727 Tool Bit Blank, Cobalt Steel, 2-1/2″ Overall Length, 3/16″ Size #ad - The union butterfield 727 tool bit blank with 2-1/2″ overall length and 3/16″ shank size is made of cobalt steel, which provides toughness for shock resistance and is harder than high-speed steel for better wear resistance. Tool bit blanks are pieces of cutting tool material that are cut to specific dimensions so they can be easily ground or machined for applications requiring custom tool bit shapes and sizes. Dormer pramet manufactures cutting tools under the following brands precision twist drill, dormer, union butterfield and pramet. The shank of the blank is square and can be machined to accommodate the desired cutting tool holder. The company has locations around the world, and provides tools adhering to ansi, nas, and din standards. The ends of the tool bit blank are beveled at 10 degrees and are ready to be machined to the custom tool bit shape.

 

Union Butterfield TN1585UNC High-Speed Steel Spiral Point Tap TiN Coated Round With Square End Plug Chamfer 2 Flute 14-20 Thread Size #ad

Union Butterfield TN1585(UNC) High-Speed Steel Spiral Point Tap, TiN Coated, Round With Square End, Plug Chamfer, 2 Flute, 1/4″-20 Thread Size

Union Butterfield TN1585(UNC) High-Speed Steel Spiral Point Tap, TiN Coated, Round With Square End, Plug Chamfer, 2 Flute, 1/4″-20 Thread Size #ad - Spiral point and straight flutes for cutting threads in through holes. Titanium nitride (tin) coating combines hardness with low friction for extended tool life and faster cutting. Relieved-style design reduces friction between tap and workpiece for reduced tool wear. Spiral point tap pushes chips ahead of tool to reduce clogging. Plug chamfer for easier starting and correct perpendicular alignment.

 

Union Butterfield 1587UNC High-Speed Steel Spiral Flute Tap High-Helix Uncoated Bright Finish Round Shank With Square End Plug Chamfer 10-24 Thread Size #ad

Union Butterfield 1587(UNC) High-Speed Steel Spiral Flute Tap, High-Helix, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, #10-24 Thread Size

Union Butterfield 1587(UNC) High-Speed Steel Spiral Flute Tap, High-Helix, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, #10-24 Thread Size #ad - Higher helix angle improves chip removal. Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different applications. Spiral flute tap design pulls chips back from the tip of the tool and out of the hole to prevent clogging. Spiral flutes for creating threads in blind holes. Round shank with square end helps to minimize rotation in the tool holder.

 

Union Butterfield 5160364 High Speed Steel HSS Square Nose End Mill Inch Double End Weldon Shank TiN Finish 2 Flutes 30625 Overall Length 18 Cutting Diameter 38 Shank Diameter #ad

Union Butterfield 5160364 High Speed Steel (HSS) Square Nose End Mill, Inch, Double End, Weldon Shank, TiN Finish, 2 Flutes, 3.0625″ Overall Length, 1/8″ Cutting Diameter, 3/8″ Shank Diameter

Union Butterfield 5160364 High Speed Steel (HSS) Square Nose End Mill, Inch, Double End, Weldon Shank, TiN Finish, 2 Flutes, 3.0625″ Overall Length, 1/8″ Cutting Diameter, 3/8″ Shank Diameter #ad - Center-cutting design allows the end mill to plunge material like a drill bit while also performing conventional surface milling. Titanium nitride (tin) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Double-end square nose end mills (also called square end) create sharp, unrounded cuts and have cutting edges on both ends for longer tool life. High-speed steel (hss) is compatible with a variety of materials.

 

Union Butterfield 430 Drift Key for Morse Taper Shank 1 Black Oxide Finish #ad

Union Butterfield 430 Drift Key for Morse Taper Shank 1, Black Oxide Finish

Union Butterfield 430 Drift Key for Morse Taper Shank 1, Black Oxide Finish #ad - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Hardened and ground.

 

Union Butterfield 1585UNC High-Speed Steel Spiral Point Tap Relieved Style Uncoated Bright Finish Round Shank With Square End Plug Chamfer H2 Tolerance 38-16 Thread Size #ad

Union Butterfield 1585(UNC) High-Speed Steel Spiral Point Tap, Relieved Style, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, H2 Tolerance, 3/8″-16 Thread Size

Union Butterfield 1585(UNC) High-Speed Steel Spiral Point Tap, Relieved Style, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, H2 Tolerance, 3/8″-16 Thread Size #ad - Round shank with square end helps to minimize rotation in the tool holder. Relieved-style design reduces friction between tap and workpiece for reduced tool wear. Available in unc (unified coarse) and unf (unified fine) right-hand thread options for different applications. Spiral point tap with straight flutes for cutting threads in through holes. Spiral point tap pushes chips ahead of tool to reduce clogging.

 

Union Butterfield 1500AUNC High-Speed Steel Hand Tap Black Oxide Finish Round Shank With Square End Plug Chamfer 38-16 Thread Size #ad

Union Butterfield 1500A(UNC) High-Speed Steel Hand Tap, Black Oxide Finish, Round Shank With Square End, Plug Chamfer, 3/8″-16 Thread Size

Union Butterfield 1500A(UNC) High-Speed Steel Hand Tap, Black Oxide Finish, Round Shank With Square End, Plug Chamfer, 3/8″-16 Thread Size #ad - Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different applications. Round shank with square end allows tap to be used in hand or power-driven applications. Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup. Hand threading tap with straight flutes cuts threads in through holes and blind holes. High-speed steel is compatible with a variety of materials.

 

Union Butterfield 4531 High-Speed Steel Expansion Chucking Reamer Straight Flute Round Shank Uncoated Bright 78 inch #ad

Union Butterfield 4531 High-Speed Steel Expansion Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright), 7/8 inch

Union Butterfield 4531 High-Speed Steel Expansion Chucking Reamer, Straight Flute, Round Shank, Uncoated (Bright), 7/8 inch #ad - Expandable as wear decreases its cutting diameter, so it can be reground and re-sharpened to its original dimensions for increased life. Morse taper shank for accurate alignment and firm hold in the socket of a toolholder. Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. Straight flute for general-purpose reaming of uninterrupted cuts in through holes and blind holes. 45-degree bevel at the cutting tip facilitates entry to pre-drilled holes.

 

Union Butterfield 1542NPS High-Speed Steel Pipe Tap Uncoated Bright Finish Round Shank With Square End 18-27 Thread Size 516 Shank Dia #ad

Union Butterfield 1542(NPS) High-Speed Steel Pipe Tap, Uncoated (Bright) Finish, Round Shank With Square End, 1/8″-27 Thread Size, 5/16″ Shank Dia

Union Butterfield 1542(NPS) High-Speed Steel Pipe Tap, Uncoated (Bright) Finish, Round Shank With Square End, 1/8″-27 Thread Size, 5/16″ Shank Dia #ad - Pipe tap cuts threads in pipes and pipe fittings. Nps (national pipe straight) for straight threading of mechanical joints. Plug chamfer for easier starting and correct perpendicular alignment. Round shank with square end helps to minimize rotation in the tool holder. Straight flutes to cut threads in through holes and blind holes.

 

Union Butterfield 2510UNC High-Speed Steel Round Threading Die Uncoated Bright Finish 1 OD 38-16 Thread Size #ad

Union Butterfield 2510(UNC) High-Speed Steel Round Threading Die, Uncoated (Bright) Finish, 1″ OD, 3/8″-16 Thread Size

Union Butterfield 2510(UNC) High-Speed Steel Round Threading Die, Uncoated (Bright) Finish, 1″ OD, 3/8″-16 Thread Size #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round adjustable split dies. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

Union Butterfield 1545NPT High-Speed Steel Pipe Tap High-Hook Uncoated Bright Finish Round Shank With Square End 18-27 Thread Size #ad

Union Butterfield 1545(NPT) High-Speed Steel Pipe Tap, High-Hook, Uncoated (Bright) Finish, Round Shank With Square End, 1/8″-27 Thread Size

Union Butterfield 1545(NPT) High-Speed Steel Pipe Tap, High-Hook, Uncoated (Bright) Finish, Round Shank With Square End, 1/8″-27 Thread Size #ad - Round shank with square end helps to minimize rotation in the tool holder. Npt (national pipe taper) thread design for tapered pipe threading. Pipe tap cuts threads in pipes and pipe fittings. High hook and deep flutes to manage long curly chips. Straight flutes to cut threads in through holes and blind holes.

 

Union Butterfield 757 Tool Bit Blank Cobalt Vanadium T-15 2-12 Overall Length 316 Size #ad

Union Butterfield 757 Tool Bit Blank, Cobalt Vanadium T-15, 2-1/2″ Overall Length, 3/16″ Size

Union Butterfield 757 Tool Bit Blank, Cobalt Vanadium T-15, 2-1/2″ Overall Length, 3/16″ Size #ad - Dormer pramet manufactures cutting tools under the following brands precision twist drill, dormer, union butterfield and pramet. The ends of the tool bit blank are beveled at 10 degrees and are ready to be machined to the custom tool bit shape. Tool bit blanks are pieces of cutting tool material that are cut to specific dimensions so they can be easily ground or machined for applications requiring custom tool bit shapes and sizes. The shank of the blank is square and can be machined to accommodate the desired cutting tool holder. The union butterfield 757 tool bit blank with 2-1/2″ overall length and 3/16″ shank size is made of cobalt vanadium t-15, which is a powdered metal that is harder than cobalt steel for better wear resistance and also provides heat resistance. The company has locations around the world, and provides tools adhering to ansi, nas, and din standards.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.