17 Best Brass Gate Valves

 

Smith-Cooper International 8501 Series Brass Gate Valve Non-Rising Stem Inline 2 NPT Female Non-Potable Water Use Only

Smith-Cooper International 8501 Series Brass Gate Valve, Non-Rising Stem, Inline, 2″ NPT Female, Non-Potable Water Use Only

Smith-Cooper International 8501 Series Brass Gate Valve, Non-Rising Stem, Inline, 2″ NPT Female, Non-Potable Water Use Only - Female national pipe taper (npt) threads for connecting to male threaded pipes. Top-mounted hand wheel for lowering and lifting the gate. Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use. Product contains brass which does not meet federal and state requirements for drinking water. 200 pounds per square inch (gauge) (psig) for water, oil, and gas (wog) and 125 psig for steam working pressure (swp). Made from brass for higher corrosion resistance than steel.

 

4 Brass Gate Valve - 200WOG FxF NPT

4″ Brass Gate Valve – 200WOG, FxF NPT

4″ Brass Gate Valve – 200WOG, FxF NPT - Threaded ends to ansi b1201. Suitable for full range of liquids and gas. Female x female npt, 384, ips. Brass forged body. Pressure rated 200wog & 125wsp.

 

Smith-Cooper International 4105 Series Brass Gate Valve Non-Rising Stem Inline Cross Handle 2 NPT Female Non-Potable Water Use Only

Smith-Cooper International 4105 Series Brass Gate Valve, Non-Rising Stem, Inline, Cross Handle, 2″ NPT Female, Non-Potable Water Use Only

Smith-Cooper International 4105 Series Brass Gate Valve, Non-Rising Stem, Inline, Cross Handle, 2″ NPT Female, Non-Potable Water Use Only - Product contains brass which does not meet federal and state requirements for drinking water. 200 pounds per square inch (gauge) (psig) for water, oil, and gas (wog). Made from brass for higher corrosion resistance than steel. Top-mounted cross handle for lowering and lifting the gate. Female national pipe taper (npt) threads for connecting to male threaded pipes. Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use.

 

12 Brass Gate Valve - 200WOG FxF NPT

1/2″ Brass Gate Valve – 200WOG, FxF NPT

1/2″ Brass Gate Valve – 200WOG, FxF NPT - Pressure rated 200wog & 125wsp. Threaded ends to ansi b1201. Suitable for full range of liquids and gas. Brass forged body. Female x female npt, 051, ips.

 

Legend Valve 900-203 Knob for 2 Brass Gate Valves

Legend Valve 900-203 Knob for 2″ Brass Gate Valves

Legend Valve 900-203 Knob for 2″ Brass Gate Valves - 200 pounds per square inch (gauge) (psig) for water, oil, and gas (wog). Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use. Made from brass for higher corrosion resistance than steel. Top-mounted cross handle for lowering and lifting the gate. Female national pipe taper (npt) threads for connecting to male threaded pipes. Product contains brass which does not meet federal and state requirements for drinking water.

 

Watts WGV 34 Brass Gate Valve 0770030

Watts WGV 3/4″ Brass Gate Valve (0770030)

Watts WGV 3/4″ Brass Gate Valve (0770030) - Maximum pressure 200psi (13. Model wgv is available in sizes 1/2 to 4 in. (15 to 100mm) threaded bonnet non-rising stem brass body 1/2″, 4″ (15, 100mm) threaded ips end connections. Watts wgv 3/4″ brass gate valve (0770030) features 1/2 to 4 in. Model wgvs is available in sizes 1/2 to 2 in. Watts wgv 3/4″ brass gate valve (0770030)series wgv, wgvs brass gate valves are used in commercial and residential general service applications. (15 to 100mm) with npt female threaded end connections. 8 bar) wog. (15 to 50mm) with solder end connections. They feature a brass body construction, brass non-rising stem and gland, ptfe packing, brass threaded bonnet, brass wedge disc, and cast iron handwheel.

 

American Granby GV200-200T 2 in FPT Brass Gate Valve

American Granby GV200-200T 2 in. FPT Brass Gate Valve

American Granby GV200-200T 2 in. FPT Brass Gate Valve - Constructed of heavy duty forged brass. Cast iron hand wheel. Die-cast body, forged bonnet are connected with a ptfe body to bonnet gasket for a leak proof seat. Screwed bonnet, non-rising stem, solid wedge disc and integral seats. Graphite stem seal packing.

 

2 NPT Inner Thread Heavy Duty Brass Gate Valve For Viscous Liquids

2″ NPT Inner Thread, Heavy Duty Brass Gate Valve For Viscous Liquids

2″ NPT Inner Thread, Heavy Duty Brass Gate Valve For Viscous Liquids - The t-401 have a screwed bonnet, non-rising stem, solid wedge disc, and integral seats. Body and bonnet are connected with a tight metal to metal leakproof seat. Size 2″ fnpt. Constructed of heavy duty cast brass. Recommended for non-steam use in residential and commercial applications.

 

2 Brass Gate Valve - 200WOG FxF NPT

2″ Brass Gate Valve – 200WOG, FxF NPT

2″ Brass Gate Valve – 200WOG, FxF NPT - Pressure rated 200wog & 125wsp. Suitable for full range of liquids and gas. Female x female npt, 174, ips. Brass forged body. Threaded ends to ansi b1201.

 

IrrigationKing RKGV3 3 Brass Gate Valve Full Bore

IrrigationKing RKGV3 3″ Brass Gate Valve Full Bore

IrrigationKing RKGV3 3″ Brass Gate Valve Full Bore - Inlet/outlet 3 inch female npt threads.   Not to be used for potable water. Irrigationking 3 inch brass gate valve full bore.

 

Legend Valve 104-468NL T-400 No Lead Brass Gate Valve 2

Legend Valve 104-468NL T-400 No Lead Brass Gate Valve, 2″

Legend Valve 104-468NL T-400 No Lead Brass Gate Valve, 2″ - Legend models t-400/s-400 gate valves are constructed of cast brass. They have a screwed bonnet, non-rising stem, solid wedge disc and integral seats. They are an excellent competitive alternative where port size is not critical. Body and bonnet are connected with a tight metal to metal leak-proof seat. Recommended for non-steam use in residential and commercial applications.

 

Legend Valve 104-308 2 T-401 Brass Gate Valve

Legend Valve 104-308 2″ T-401 Brass Gate Valve

Legend Valve 104-308 2″ T-401 Brass Gate Valve - The t-401 have a screwed bonnet, non-rising stem, solid wedge disc, and integral seats. Constructed of heavy duty cast brass. Size 2″ fnpt. Recommended for non-steam use in residential and commercial applications. Body and bonnet are connected with a tight metal to metal leakproof seat.

 

Matco-Norca 514T04 Brass Gate Valve Full Port 34 NPT

Matco-Norca 514T04 Brass Gate Valve, Full Port, 3/4″ NPT

Matco-Norca 514T04 Brass Gate Valve, Full Port, 3/4″ NPT - Full port cast brass 200 wog, 125 swp. Valves are tested in accordance w/ mss-sp-82. Iapmo approved. Non-rising stem threaded bonnet. Threaded ends conform to ansi standards b21.

 

American Valve G300 1 Lead-Free Brass Gate Valve IPS 1-Inch

American Valve G300 1″ Lead-Free Brass Gate Valve IPS, 1-Inch

American Valve G300 1″ Lead-Free Brass Gate Valve IPS, 1-Inch - The american valve g300 is a lead-free gate valve with female ips threaded ends. It features a solid wedge disc and adjustable packing nut.

 

Legend Valve 104-723NL S-408 No Lead Brass Gate Valve 12

Legend Valve 104-723NL S-408 No Lead Brass Gate Valve, 1/2″

Legend Valve 104-723NL S-408 No Lead Brass Gate Valve, 1/2″ - They have a screwed bonnet, non-rising stem, solid wedge disc, and integral seats. Recommended for non-steam use in residential applications. The t-408/s-408 is legend’s newest entry into the competitive gate valve market. Legend models t-408/s-408 gate valves are constructed of heavy duty cast brass. Body and bonnet are connected with a tight metal to metal leak-proof seat.

 

Smith-Cooper International 8502 Series Brass Gate Valve Non-Rising Stem Inline 12 Solder End Non-Potable Water Use Only

Smith-Cooper International 8502 Series Brass Gate Valve, Non-Rising Stem, Inline, 1/2″ Solder End, Non-Potable Water Use Only

Smith-Cooper International 8502 Series Brass Gate Valve, Non-Rising Stem, Inline, 1/2″ Solder End, Non-Potable Water Use Only - Top-mounted hand wheel for lowering and lifting the gate. Made from brass for higher corrosion resistance than steel. Product contains brass which does not meet federal and state requirements for drinking water. Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use. 200 pounds per square inch (gauge) (psig) for water, oil, and gas (wog) and 125 psig for steam working pressure (swp). Solder ends for a strong and durable heat-joined bond using solder and a torch.

 

Dixon BGV200 Brass Gate Valve 2 NPT Female

Dixon BGV200 Brass Gate Valve, 2″ NPT Female

Dixon BGV200 Brass Gate Valve, 2″ NPT Female - 2″ npt female. 100 percent factory tested. Female npt threaded ends. Non-rising stem. Integral seat. Threaded bonnet. Solid wedge disc. Iron handwheel. Rated 200 psi non-shock cold water, oil or gas. Adjustable packing nut. Brass gate valve.