16 Coolest Z Carbs

 

SGS 36375 Z1PCR Z-Carb-AP High Performance End Mill Titanium Nitride-X Coating 38 Cutting Diameter 78 Cutting Length 38 Shank Diameter 2-12 Length 0010 Corner Radius

SGS 36375 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 3/8″ Cutting Diameter, 7/8″ Cutting Length, 3/8″ Shank Diameter, 2-1/2″ Length, 0.010″ Corner Radius

SGS 36375 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 3/8″ Cutting Diameter, 7/8″ Cutting Length, 3/8″ Shank Diameter, 2-1/2″ Length, 0.010″ Corner Radius - The z-carb-ap offers performance so advanced, it goes way beyond typical high performance carbide end mills. The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics. With its patented, one of a kind geometry, the z-carb-ap offers three stages of chatter suppression.

 

SGS 36386 Z1PCR Z-Carb-AP High Performance End Mill Titanium Nitride-X Coating 34 Cutting Diameter 1-12 Cutting Length 34 Shank Diameter 4 Length 0030 Corner Radius

SGS 36386 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 3/4″ Cutting Diameter, 1-1/2″ Cutting Length, 3/4″ Shank Diameter, 4″ Length, 0.030″ Corner Radius

SGS 36386 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 3/4″ Cutting Diameter, 1-1/2″ Cutting Length, 3/4″ Shank Diameter, 4″ Length, 0.030″ Corner Radius - With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics. The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With its patented, one of a kind geometry, the z-carb-ap offers three stages of chatter suppression. The z-carb-ap offers performance so advanced, it goes way beyond typical high performance carbide end mills.

 

SGS 36701 Z1PCR Z-Carb-AP High Performance End Mill Titanium Nitride-X Coating with Flat 38 Cutting Diameter 78 Cutting Length 38 Shank Diameter 2-12 Length 0010 Corner Radius

SGS 36701 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating with Flat, 3/8″ Cutting Diameter, 7/8″ Cutting Length, 3/8″ Shank Diameter, 2-1/2″ Length, 0.010″ Corner Radius

SGS 36701 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating with Flat, 3/8″ Cutting Diameter, 7/8″ Cutting Length, 3/8″ Shank Diameter, 2-1/2″ Length, 0.010″ Corner Radius - With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics. The z-carb-ap offers performance so advanced, it goes way beyond typical high performance carbide end mills. The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With its patented, one of a kind geometry, the z-carb-ap offers three stages of chatter suppression.

 

PART NO SGS36855 516 Z-Carb-AP Corner Radius Carbide End Mill Ti-NAMITE-X Coating 4-Flute 0020 CR SGS Series Z1PCR

PART NO. SGS36855 5/16″ Z-Carb-AP Corner Radius Carbide End Mill, Ti-NAMITE-X Coating, 4-Flute, 0.020″ C.R., SGS Series Z1PCR

PART NO. SGS36855 5/16″ Z-Carb-AP Corner Radius Carbide End Mill, Ti-NAMITE-X Coating, 4-Flute, 0.020″ C.R., SGS Series Z1PCR - Part no. The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. R. The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever. Sgs36855 5/16″ z-carb-ap corner radius carbide end mill, ti-namite-x coating, 4-flute, 0. 020″ c. , Sgs series z1pcr.

 

SGS 36725 Z1PCR Z-Carb-AP High Performance End Mill Titanium Nitride-X Coating 38 Cutting Diameter 78 Cutting Length 38 Shank Diameter 2-12 Length 0015 Corner Radius

SGS 36725 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 3/8″ Cutting Diameter, 7/8″ Cutting Length, 3/8″ Shank Diameter, 2-1/2″ Length, 0.015″ Corner Radius

SGS 36725 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 3/8″ Cutting Diameter, 7/8″ Cutting Length, 3/8″ Shank Diameter, 2-1/2″ Length, 0.015″ Corner Radius - The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With its patented, one of a kind geometry, the z-carb-ap offers three stages of chatter suppression. With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics. The z-carb-ap offers performance so advanced, it goes way beyond typical high performance carbide end mills.

 

SGS 36601 Z1PCR Z-Carb-AP High Performance End Mill Titanium Nitride-X Coating 14 Cutting Diameter 34 Cutting Length 14 Shank Diameter 2-12 Length 0030 Corner Radius

SGS 36601 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 1/4″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length, 0.030″ Corner Radius

SGS 36601 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 1/4″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length, 0.030″ Corner Radius - The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With its patented, one of a kind geometry, the z-carb-ap offers three stages of chatter suppression. The z-carb-ap offers performance so advanced, it goes way beyond typical high performance carbide end mills. With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics.

 

PART NO SGS37037 12 Z-Carb HPR Corner Radius Carbide Roughing End Mill Ti-Namite-M Coated 5-Flute 0015 CR SGS 37037 Series Z5CR

PART NO. SGS37037 1/2″ Z-Carb HPR Corner Radius Carbide Roughing End Mill, Ti-Namite-M Coated, 5-Flute, 0.015″ CR, SGS 37037, Series Z5CR

PART NO. SGS37037 1/2″ Z-Carb HPR Corner Radius Carbide Roughing End Mill, Ti-Namite-M Coated, 5-Flute, 0.015″ CR, SGS 37037, Series Z5CR - Sgs37037 1/2″ z-carb hpr corner radius carbide roughing end mill, ti-namite-m coated, 5-flute, 0. 015″ cr, sgs 37037, series z5cr. The variable indexing geometry allows for improved chatter suppression over symetrical designs. Part no. The specialized five flute design is engineered for increased productivity over three and four flute end mills. The new z-carb hpr five flute roughing end mills are ideal for achieving high material removal rates and a finish of 80 rms or better on most materials. The new series is offered in a variety of length, square, and corner radius optionss and is coated with the ti-namite-m for superior performance in difficult to machine materials like titanium.

 

SGS 36513 Z16CR Z-Carb High Performance End Mill Aluminum Titanium Nitride Coating 38 Cutting Diameter 58 Cutting Length 38 Shank Diameter 2 Length

SGS 36513 Z16CR Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 5/8″ Cutting Length, 3/8″ Shank Diameter, 2″ Length

SGS 36513 Z16CR Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 3/8″ Cutting Diameter, 5/8″ Cutting Length, 3/8″ Shank Diameter, 2″ Length - The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever. The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications.

 

PART NO SGS36854 14 Z-Carb-AP Corner Radius Carbide End Mill Ti-NAMITE-X TX Coating 4-Flute 0020 CR SGS Series Z1PCR

PART NO. SGS36854 1/4″ Z-Carb-AP Corner Radius Carbide End Mill, Ti-NAMITE-X (TX) Coating, 4-Flute, 0.020″ C.R., SGS Series Z1PCR

PART NO. SGS36854 1/4″ Z-Carb-AP Corner Radius Carbide End Mill, Ti-NAMITE-X (TX) Coating, 4-Flute, 0.020″ C.R., SGS Series Z1PCR - The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications. , sgs series z1pcr. Part no. 020″ c. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever. Sgs36854 1/4″ z-carb-ap corner radius carbide end mill, ti-namite-x (tx) coating, 4-flute, 0. The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. R.

 

SGS 36596 Z1 Z-Carb High Performance End Mill Aluminum Titanium Nitride Coating 14 Cutting Diameter 34 Cutting Length 14 Shank Diameter 2-12 Length

SGS 36596 Z1 Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length

SGS 36596 Z1 Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length - The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications. The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever.

 

PART NO SGS37023 38 Z-Carb HPR Corner Radius Carbide Roughing End Mill Ti-Namite-M Coated 5-Flute 003 CR SGS 37023 Series Z5CR

PART NO. SGS37023 3/8″ Z-Carb HPR Corner Radius Carbide Roughing End Mill, Ti-Namite-M Coated, 5-Flute, 0.03″ CR, SGS 37023, Series Z5CR

PART NO. SGS37023 3/8″ Z-Carb HPR Corner Radius Carbide Roughing End Mill, Ti-Namite-M Coated, 5-Flute, 0.03″ CR, SGS 37023, Series Z5CR - 03″ cr, sgs 37023, series z5cr. Part no. The new series is offered in a variety of length, square, and corner radius optionss and is coated with the ti-namite-m for superior performance in difficult to machine materials like titanium. The variable indexing geometry allows for improved chatter suppression over symetrical designs. The specialized five flute design is engineered for increased productivity over three and four flute end mills. Sgs37023 3/8″ z-carb hpr corner radius carbide roughing end mill, ti-namite-m coated, 5-flute, 0. The new z-carb hpr five flute roughing end mills are ideal for achieving high material removal rates and a finish of 80 rms or better on most materials.

 

SGS 36610 Z1PCR Z-Carb-AP High Performance End Mill Titanium Nitride-X Coating 12 Cutting Diameter 1-14 Cutting Length 12 Shank Diameter 3-14 Length 0060 Corner Radius

SGS 36610 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 1/2″ Cutting Diameter, 1-1/4″ Cutting Length, 1/2″ Shank Diameter, 3-1/4″ Length, 0.060″ Corner Radius

SGS 36610 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 1/2″ Cutting Diameter, 1-1/4″ Cutting Length, 1/2″ Shank Diameter, 3-1/4″ Length, 0.060″ Corner Radius - The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics. With its patented, one of a kind geometry, the z-carb-ap offers three stages of chatter suppression. The z-carb-ap offers performance so advanced, it goes way beyond typical high performance carbide end mills.

 

PART NO SGS36858 12 Z-Carb-AP Corner Radius Carbide End Mill Ti-NAMITE-X Coating 4-Flute 0030 CR SGS Series Z1PCR

PART NO. SGS36858 1/2″ Z-Carb-AP Corner Radius Carbide End Mill, Ti-NAMITE-X Coating, 4-Flute, 0.030″ C.R., SGS Series Z1PCR

PART NO. SGS36858 1/2″ Z-Carb-AP Corner Radius Carbide End Mill, Ti-NAMITE-X Coating, 4-Flute, 0.030″ C.R., SGS Series Z1PCR - Sgs36858 1/2″ z-carb-ap corner radius carbide end mill, ti-namite-x coating, 4-flute, 0. 030″ c. , Sgs series z1pcr. R. Part no. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever. The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications. The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry.

 

PART NO SGS36517 12 Z-Carb Variable Geometry Corner Radius Carbide End Mill AlTiN Coating 4-Flute 0025 - 0030 CR SGS Series Z16CR

PART NO. SGS36517 1/2″ Z-Carb Variable Geometry Corner Radius Carbide End Mill, AlTiN Coating, 4-Flute, 0.025 – 0.030″ C.R., SGS Series Z16CR

PART NO. SGS36517 1/2″ Z-Carb Variable Geometry Corner Radius Carbide End Mill, AlTiN Coating, 4-Flute, 0.025 – 0.030″ C.R., SGS Series Z16CR - The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. 030″ c. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever. The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications. , Sgs series z16cr. 025, 0. Sgs36517 1/2″ z-carb variable geometry corner radius carbide end mill, altin coating, 4-flute, 0. Part no. R.

 

12 End Mill 4FL BN TX WF - Z-CARB 12x12x1-14x3-14

?1/2 End Mill 4FL BN TX WF – Z-CARB 1/2×1/2×1-1/4×3-1/4

?1/2 End Mill 4FL BN TX WF – Z-CARB 1/2×1/2×1-1/4×3-1/4 - Descriptionmanufacturerno, 36592coating, altintool diameter, 1/2o. Of flutes, 4flute type, spiral flutecutting length, 11/4shank type, flatproduct warn warning this product contains a chemical known to the state of california to cause cancer or birth defects. Length, 31/4shank diameter, 1/2style, ball noselength below shank, 2shank size, 1/2no. A.

 

SGS 36872 Z1PCR Z-Carb-AP High Performance End Mill Titanium Nitride-X Coating 116 Cutting Diameter 316 Cutting Length 18 Shank Diameter 1-12 Length 0005 Corner Radius

SGS 36872 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 1/16″ Cutting Diameter, 3/16″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length, 0.005″ Corner Radius

SGS 36872 Z1PCR Z-Carb-AP High Performance End Mill, Titanium Nitride-X Coating, 1/16″ Cutting Diameter, 3/16″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length, 0.005″ Corner Radius - The z-carb-ap offers performance so advanced, it goes way beyond typical high performance carbide end mills. The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With its patented, one of a kind geometry, the z-carb-ap offers three stages of chatter suppression. With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.