15 Best and Coolest Aluminum Shim Stocks

 

1100 Aluminum Shim Stock SAE-AMS-DTL-22499QQ-A-2501 025 Thick 24 Width 24 Length 0002 Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.25″ Thick, 24″ Width, 24″ Length, 0.002″ Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.25″ Thick, 24″ Width, 24″ Length, 0.002″ Laminate Layers - 00% minimum aluminum content and is nonmagnetic. The aluminum 1100 shim stock sheet has 0. The 0. Spec. Shims can also be used to fill in gaps between machine parts that are prone to wear, avoiding costly replacement parts and lost production time. 002″ laminate layers of material peel from the sheet to customize the thickness to the application. This sheet conforms to sae aerospace materials standards (ams) dtl-22499 and federal specification (fed. 002″ laminate layers for adjustable thickness and is made of a lightweight aluminum alloy that offers moderate strength and some of the highest corrosion resistance of all aluminum alloys. These fabricated pieces, also called shims, can be placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. Aluminum 1100 is considered commercially pure with its 99. ) Qq-a-250/1. While most shim stock is sold in standard thicknesses of solid material, shim stock with laminated layers is composed of stacked foil sheets that have been pressed and heated together and that peel off to adjust the shim’s thickness to the application. Shim stock, which is sold in either sheets or rolls, is a very thin material that can be cut, sawed, stamped, milled, or bored into specific shapes.

 

1100 Aluminum Shim Stock Silver Full Hard Temper ASTM B209 0005 Thick 6 Width 100 Length

1100 Aluminum Shim Stock, Silver, Full Hard Temper, ASTM B209, 0.005″ Thick, 6″ Width, 100″ Length

1100 Aluminum Shim Stock, Silver, Full Hard Temper, ASTM B209, 0.005″ Thick, 6″ Width, 100″ Length - These fabricated pieces, also called shims, can be placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. Cold rolling can cause a temper to form in the material, increasing the yield strength (the amount of force necessary to permanently bend or deform the material) as well as hardness ratings of the material. The full-hard temper provides high hardness and yield strength ratings for dimensional stability during use. Spec. Shim stock, which is sold in either sheets or rolls, is a very thin material that can be cut, sawed, stamped, milled, or bored into specific shapes. Quarter-hard tempered material provides the lowest hardness and yield strength ratings and the greatest ductility of the tempers, with half-hard, three-quarters-hard, full-hard, spring, and blue tempered material respectively increasing in hardness and yield strength. Aluminum 1100 is considered commercially pure with its 99. Shims can also be used to fill in gaps between machine parts that are prone to wear, avoiding costly replacement parts and lost production time. ) Qq-a-250/1. This roll conforms to american society for testing and materials (astm) b209 and federal specification (fed. The aluminum 1100 shim stock roll has a full-hard temper for dimensional stability and is made of a lightweight, nonmagnetic aluminum alloy that can be machined in half the time of stainless steel. The higher its hardness and yield strength ratings, the more likely the shim is to preserve its thickness and shape over time while in use, but the harder it will be to bend and shape. 00% minimum aluminum content and displays properties such as excellent weldability moderate strength and some of the highest corrosion resistance of all aluminum alloys. While most shim stock is sold in standard thicknesses of solid material, shim stock with laminated layers is composed of stacked foil sheets that have been pressed and heated together and that peel off to adjust the shim’s thickness to the application. Shim stock is fabricated by cold rolling, which is the process of reducing a material’s thickness by passing it between two rollers. Annealed shim stock has been heated and cooled to remove any temper and reinstate the material’s natural formability (ability to be bent) after it has been cold rolled.

 

1100 Aluminum Shim Stock Full Hard Temper AISI 1100-H18 0002 Thick 6 Width 100 Length

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.002″ Thick, 6″ Width, 100″ Length

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.002″ Thick, 6″ Width, 100″ Length - Precision brand shim stock is widely used in the following applications tool and die set up alignment new machine assembly machine repair and maintenance mounting of motors, pumps and other machines short run and prototype work along with a variety of other industrial uses. All precision brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances. It is especially useful for pilot production runs where material accuracy and economy are important.

 

1100 Aluminum Shim Stock Full Hard Temper ASTM B209 0015 Thick 6 Width 100 Length

1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.015″ Thick, 6″ Width, 100″ Length

1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.015″ Thick, 6″ Width, 100″ Length - While most shim stock is sold in standard thicknesses of solid material, shim stock with laminated layers is composed of stacked foil sheets that have been pressed and heated together and that peel off to adjust the shim’s thickness to the application. Cold rolling can cause a temper to form in the material, increasing the yield strength (the amount of force necessary to permanently bend or deform the material) as well as hardness ratings of the material. 00% minimum aluminum content and displays properties such as excellent weldability moderate strength and some of the highest corrosion resistance of all aluminum alloys. Shim stock, which is sold in either sheets or rolls, is a very thin material that can be cut, sawed, stamped, milled, or bored into specific shapes. The aluminum 1100 shim stock roll has a full-hard temper for dimensional stability and is made of a lightweight, nonmagnetic aluminum alloy that can be machined in half the time of stainless steel. ) Qq-a-250/1. These fabricated pieces, also called shims, can be placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. This roll conforms to american society for testing and materials (astm) b209 and federal specification (fed. Shim stock is fabricated by cold rolling, which is the process of reducing a material’s thickness by passing it between two rollers. Spec. The full-hard temper provides high hardness and yield strength ratings for dimensional stability during use. Quarter-hard tempered material provides the lowest hardness and yield strength ratings and the greatest ductility of the tempers, with half-hard, three-quarters-hard, full-hard, spring, and blue tempered material respectively increasing in hardness and yield strength. The higher its hardness and yield strength ratings, the more likely the shim is to preserve its thickness and shape over time while in use, but the harder it will be to bend and shape. Annealed shim stock has been heated and cooled to remove any temper and reinstate the material’s natural formability (ability to be bent) after it has been cold rolled. Shims can also be used to fill in gaps between machine parts that are prone to wear, avoiding costly replacement parts and lost production time. Aluminum 1100 is considered commercially pure with its 99.

 

1100 Aluminum Shim Stock AISI 1100-H18AMS 4013 0125 Thick 24 Width 24 Length 0003 Laminate Layers

1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.125″ Thick, 24″ Width, 24″ Length, 0.003″ Laminate Layers

1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.125″ Thick, 24″ Width, 24″ Length, 0.003″ Laminate Layers - Precision brand laminated shim is made by using pressure and resin/adhesive to bond metal shim together which creates a rigid “one piece” item that appears to function as a single solid metal sheet or plate. Remove layers by peeling away with a pocket knife to the desired thickness. Sheets may be cut, sawed, stamped, milled, or bored to almost any configuration. Bonding adhesive makes for just right peeling, no tearing or ripping of the layers. Sheets are uniform from edge to edge.

 

1100 Aluminum Shim Stock SAE-AMS-DTL-22499QQ-A-2501 0016 Thick 12 Width 12 Length 0002 Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.016″ Thick, 12″ Width, 12″ Length, 0.002″ Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.016″ Thick, 12″ Width, 12″ Length, 0.002″ Laminate Layers - 002″ laminate layers for adjustable thickness and is made of a lightweight aluminum alloy that offers moderate strength and some of the highest corrosion resistance of all aluminum alloys. 00% minimum aluminum content and is nonmagnetic. Spec. Shim stock, which is sold in either sheets or rolls, is a very thin material that can be cut, sawed, stamped, milled, or bored into specific shapes. The aluminum 1100 shim stock sheet has 0. Shims can also be used to fill in gaps between machine parts that are prone to wear, avoiding costly replacement parts and lost production time. While most shim stock is sold in standard thicknesses of solid material, shim stock with laminated layers is composed of stacked foil sheets that have been pressed and heated together and that peel off to adjust the shim’s thickness to the application. 002″ laminate layers of material peel from the sheet to customize the thickness to the application. This sheet conforms to sae aerospace materials standards (ams) dtl-22499 and federal specification (fed. Aluminum 1100 is considered commercially pure with its 99. ) Qq-a-250/1. These fabricated pieces, also called shims, can be placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. The 0.

 

1100 Aluminum Shim Stock AISI 1100-H18AMS 4013 0016 Thick 24 Width 24 Length 0003 Laminate Layers

1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.016″ Thick, 24″ Width, 24″ Length, 0.003″ Laminate Layers

1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.016″ Thick, 24″ Width, 24″ Length, 0.003″ Laminate Layers - Precision brand laminated shim is made by using pressure and resin/adhesive to bond metal shim together which creates a rigid “one piece” item that appears to function as a single solid metal sheet or plate. Remove layers by peeling away with a pocket knife to the desired thickness. Bonding adhesive makes for just right peeling, no tearing or ripping of the layers. Sheets may be cut, sawed, stamped, milled, or bored to almost any configuration. Sheets are uniform from edge to edge.

 

1100 Aluminum Shim Stock SAE-AMS-DTL-22499QQ-A-2501 0187 Thick 24 Width 24 Length 0003 Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.187″ Thick, 24″ Width, 24″ Length, 0.003″ Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.187″ Thick, 24″ Width, 24″ Length, 0.003″ Laminate Layers - The aluminum 1100 shim stock sheet has 0. Shim stock, which is sold in either sheets or rolls, is a very thin material that can be cut, sawed, stamped, milled, or bored into specific shapes. Shims can also be used to fill in gaps between machine parts that are prone to wear, avoiding costly replacement parts and lost production time. 00% minimum aluminum content and is nonmagnetic. These fabricated pieces, also called shims, can be placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. ) Qq-a-250/1. Spec. 003″ laminate layers of material peel from the sheet to customize the thickness to the application. The 0. While most shim stock is sold in standard thicknesses of solid material, shim stock with laminated layers is composed of stacked foil sheets that have been pressed and heated together and that peel off to adjust the shim’s thickness to the application. 003″ laminate layers for adjustable thickness and is made of a lightweight aluminum alloy that offers moderate strength and some of the highest corrosion resistance of all aluminum alloys. Aluminum 1100 is considered commercially pure with its 99. This sheet conforms to sae aerospace materials standards (ams) dtl-22499 and federal specification (fed.

 

1100 Aluminum Shim Stock Full Hard Temper AISI 1100-H18 0010 Thick 6 Width 100 Length

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.010″ Thick, 6″ Width, 100″ Length

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.010″ Thick, 6″ Width, 100″ Length - Precision brand shim stock is widely used in the following applications tool and die set up alignment new machine assembly machine repair and maintenance mounting of motors, pumps and other machines short run and prototype work along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All precision brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

 

1100 Aluminum Shim Stock Full Hard Temper ASTM-B-209 0005 Thick 6 Width 100 Length

1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.005″ Thick, 6″ Width, 100″ Length

1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.005″ Thick, 6″ Width, 100″ Length - Strain hardened to a full-hard h19 temper to improve toughness. Sold in rolls for cutting, stamping, milling, and shaping into shims of various sizes and shapes. Cold rolling improves the yield strength and hardness of the material and provides good surface quality, tight tolerances, and accurate dimensions. Conforms to specifications mil-w-85 and astm-b-209. Aluminum 1145 is lightweight, provides good electrical and thermal conductivity, resists corrosion, and is easily cold worked and formed.

 

1100 Aluminum Shim Stock SAE-AMS-DTL-22499QQ-A-2501 0125 Thick 12 Width 12 Length 0003 Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.125″ Thick, 12″ Width, 12″ Length, 0.003″ Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.125″ Thick, 12″ Width, 12″ Length, 0.003″ Laminate Layers - 003″ laminate layers for adjustable thickness and is made of a lightweight aluminum alloy that offers moderate strength and some of the highest corrosion resistance of all aluminum alloys. 00% minimum aluminum content and is nonmagnetic. Aluminum 1100 is considered commercially pure with its 99. These fabricated pieces, also called shims, can be placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. ) Qq-a-250/1. 003″ laminate layers of material peel from the sheet to customize the thickness to the application. Shim stock, which is sold in either sheets or rolls, is a very thin material that can be cut, sawed, stamped, milled, or bored into specific shapes. The aluminum 1100 shim stock sheet has 0. While most shim stock is sold in standard thicknesses of solid material, shim stock with laminated layers is composed of stacked foil sheets that have been pressed and heated together and that peel off to adjust the shim’s thickness to the application. The 0. Shims can also be used to fill in gaps between machine parts that are prone to wear, avoiding costly replacement parts and lost production time. Spec. This sheet conforms to sae aerospace materials standards (ams) dtl-22499 and federal specification (fed.

 

1100 Aluminum Shim Stock Full Hard Temper AISI 1100-H18 0001 Thick 6 Width 100 Length

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.001″ Thick, 6″ Width, 100″ Length

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.001″ Thick, 6″ Width, 100″ Length - All precision brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances. It is especially useful for pilot production runs where material accuracy and economy are important. Precision brand shim stock is widely used in the following applications tool and die set up alignment new machine assembly machine repair and maintenance mounting of motors, pumps and other machines short run and prototype work along with a variety of other industrial uses.

 

1100 Aluminum Shim Stock Full Hard Temper ASTM B209 0008 Thick 6 Width 100 Length

1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.008″ Thick, 6″ Width, 100″ Length

1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.008″ Thick, 6″ Width, 100″ Length - It is especially useful for pilot production runs where material accuracy and economy are important. Precision brand shim stock is widely used in the following applications tool and die set up alignment new machine assembly machine repair and maintenance mounting of motors, pumps and other machines short run and prototype work along with a variety of other industrial uses. All precision brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

 

1100 Aluminum Shim Stock AISI 1100-H18AMS 4013 0094 Thick 24 Width 24 Length 0002 Laminate Layers

1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.094″ Thick, 24″ Width, 24″ Length, 0.002″ Laminate Layers

1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.094″ Thick, 24″ Width, 24″ Length, 0.002″ Laminate Layers - Precision brand laminated shim is made by using pressure and resin/adhesive to bond metal shim together which creates a rigid “one piece” item that appears to function as a single solid metal sheet or plate. Sheets are uniform from edge to edge. Bonding adhesive makes for just right peeling, no tearing or ripping of the layers. Remove layers by peeling away with a pocket knife to the desired thickness. Sheets may be cut, sawed, stamped, milled, or bored to almost any configuration.

 

1100 Aluminum Shim Stock SAE-AMS-DTL-22499QQ-A-2501 025 Thick 24 Width 24 Length 0003 Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.25″ Thick, 24″ Width, 24″ Length, 0.003″ Laminate Layers

1100 Aluminum Shim Stock, SAE-AMS-DTL-22499/QQ-A-250/1, 0.25″ Thick, 24″ Width, 24″ Length, 0.003″ Laminate Layers - 003″ laminate layers for adjustable thickness and is made of a lightweight aluminum alloy that offers moderate strength and some of the highest corrosion resistance of all aluminum alloys. These fabricated pieces, also called shims, can be placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. Shim stock, which is sold in either sheets or rolls, is a very thin material that can be cut, sawed, stamped, milled, or bored into specific shapes. 003″ laminate layers of material peel from the sheet to customize the thickness to the application. Aluminum 1100 is considered commercially pure with its 99. The 0. The aluminum 1100 shim stock sheet has 0. While most shim stock is sold in standard thicknesses of solid material, shim stock with laminated layers is composed of stacked foil sheets that have been pressed and heated together and that peel off to adjust the shim’s thickness to the application. Spec. 00% minimum aluminum content and is nonmagnetic. ) Qq-a-250/1. Shims can also be used to fill in gaps between machine parts that are prone to wear, avoiding costly replacement parts and lost production time. This sheet conforms to sae aerospace materials standards (ams) dtl-22499 and federal specification (fed.